The price listed here is for a queen bed. For a king bed, add $100.
The bottom of the bed is 8 1/2 inches off the ground, and the top of the headboard is about 39 inches off the ground, and there's about 13 inches from the top of the slats to the bottom of the headboard* (see note below). The mattress rests on slats, and I can put a thin sheet of plywood over the slats to give a uniform, platform-like surface upon request (some folks prefer just the slats- depends on your mattress). It has four drawers underneath, two that slide out on each side (in the picture there are only two long drawers that slide out to either side of the bed, I have since switched to four drawers). Each drawer is approximately 6 inches tall, 29 inches wide, and 27 inches deep**
My design approach on the drawers is to keep them recessed behind the edge of the bed, and to have them floating off the ground, so that visually the bed does not feel bulky like most storage beds do. The drawers are built from the same wood as the bed, so if someone does look underneath they'll see the same beautiful wood as elsewhere. Also, I typically leave about 16" from the back of the bed to the back of the closest drawer so that the drawer will not run into a night stand. All elements of the design can be customized for the needs of your room.
The night stands are attached by two bolts (they detach for moving purposes) and are roughly 15" wide, 15" deep, and 23" tall but the size can be customized. They rest on one leg, and the rear drawer slides freely under them.
I can deliver and assemble for $100 if you're in the L.A. area. Shipping is $500 to $700 depending on where you live. Residents of California pay a 9.25% sales tax. Email or call Peter at 562 237-8420. Check out my other work at www.petedeeblefurniture.com and/or follow me on instagram @petedeeble.
My wait time for this piece is roughly 2 to 3 months right now. Please contact me for specifics, as this wait can change depending on a few variables.
*The bed pictured in this listing has an extended headboard, so the distance from the slats to the bottom of the headboard is actually closer to 9". To see a picture of the standard headboard, please see my listing for the "Danish Modern Bed" elsewhere on Etsy.
**The dimensions of the drawers change slightly for a king bed