Made in the USA
Silicone Soap Mold & Candle Mold
This Silicone Mold will make this Large Pinecone ,as seen in the photographs, This is a one cavity mold. Height Approx. 4 1/4"
The wax samples weight is 8.7 ounces.
Soap will weigh more. Your weight will depend upon soap or wax you use. This is a split/cut mold for easy release.
Not FDA approved for food use Smoke Free Enviroment
Wonderful detail & real look are just what silicone molds are all about, silicone captures & reproduces this high detailed design that look so real you'll want to eat them!
This is a one cavity soft & flexible silicone soap mold of the piece pictured. This is a slit Mold. Easy to pour & color, they have clean crisp color line to follow. Lots of detail as you can see. Duplication of this mold is prohibited. Feel free to produce soaps, from this mold for your customers.
You are bidding on the silicone mold only, my photo shows the finished piece that the mold will produce. Your item is shipped within 5/7 days from when payment is received
Please know how to work with your products before purchasing a mold to achieve a certain effect. Sculptures In Soap offers you the mold only. It is up to you to create a finished piece from the raw materials you use.
Each mold is hand poured fresh, and I have invested in the equipment that eliminates the excess air from silicone, what this means for you, is it creates a soft and flexible mold, but also a stronger and longer lasting mold.
You will have hundreds of pours from them. Also they will withstand higher temps that you will ever need. They are
385 F continuous
425 F intermittently.
Designing & Hand Pouring Molds Since 2000
CUT / SLIT MOLDS
Cutting/Slitting Block Molds
If a silicone mold arrives with a cut or slit in it, don't worry, it is not broken—these are called block molds and these slits are put there to enable you to remove the piece from the mold. Most commonly these are the animals and "L" shaped items, such as a horse with the protruding head and ears. These molds for these types of pieces will have a jagged cut in the mold itself, this mold is not broken or torn either. This cut is put there to enable you to demold the soap from the mold. Otherwise you would not be able to get the piece out of the mold without this cut. Also, the more jagged the cut the better, it is less likely to show any seam. Rubber bands that I include with these types of molds hold the mold together for pouring. Items such as ears, wings etc. require a cut or slit. If the cuts/slits are there and you are still having a problem, then the cuts need to be made larger.
Slits/cuts DO NOT HURT THE MOLD. You can even cut all the way through a mold if you wish, rubber bands hold the mold together without leaking hot product.
Ears and noses and wings may need adjusting after you pull your piece from your mold.
When demolding an item from a cut mold, make sure you pull the silicone away from your item that is in the mold when you start to demold. Do this until you can actually see way deep into the mold as you pull the silicone away from your piece. This loosens the silicone from the rest of your item and makes demolding those ears easier.
With New Technology each Year & Advances in Silicone. I re-evaluate my silicone to ensure You are getting the BEST and State of the Art hand poured silicone Mold. My Silicone is formulated for Soap, Candle Making and casting Resin, Wax bases, Plaster.......etc. . If you would like to see a photograph of a Variety of some of my silicone molds in the silicone I use, please visit my "About" page in my etsy Shop at this link. Please Note the High Quality and Thick molds to make sure You can Count and Trust they will work perfectly for You.
Thank You, I Wish You Much Success