These warping bars were inspired by my warping pegs. They allow for more yards of warping than the pegs but do not take up as much space as a warping board, especially if you don't need great lengths of warp. You can clamp them to a table at any distance apart. They are 16" long, 2" wide, and 3/4" thick. The pegs are 3/4" diameter x 5" long and are spaced at 3". The pegs are glued and screwed in place. The bars are made of ash that was formerly a church pew, are sanded smooth, and are unfinished. There are rubber pads on the bottom to keep them from sliding or damaging the table. The picture of the bars clamped in place are not of these pegs, but show how they are clamped to the table. The clamps are not included, but are usually on sale at one of the big box stores.