MATERIAL AND CANDLE LEGEND:
OBW – Reclaimed Oregon black walnut
T – 7/8“ Tapered
TC – Tea candles
V – Votive
RECOMMENDATIONS AND SHIPPING:
1)The 16“ L candle holders (16LG5)will fit best on tables 3‘-6“W (42“W) or larger. Not recommended for tables of lessor width.
2)The 12“ L candle holders (12LG4,12SM5,12SM4,&12AL4) will fit on tables 3‘-0“W (36“W) or larger. Not recommended for tables of lessor width.
3)All candle holders sets will include wooden or aluminum dowels for connecting the holders.
4)Shipping not included. Be sure to choose and include correct shipping costs.
5)Shipping may take 2 to4 weeks.
BEST PRACTICE AND SAFETY WARNINGS:
a)The candles should never be burned down below 1“ from the bottom of the candle (extinguish candle prior to this point).
b)Never leave the lit candle(s) unattended or allow children to touch or go near them.
c)Avoid placing lit candles in drafts.
d)Always trim the wick to a maximum of ¼“ in length prior to lighting candle(s).
e)Use caution around open flame.
f)We recommend using 100% bees wax candles for best results with respect to dripping.
g)Do not place lit candles near or under any flammable items.
THRU-BLOCK PRODUCT FINISHING AND CARE:
All Thru-Block wood products are finished with an orange oil and beeswax furniture polish called “Feed-N-Wax,“ manufactured by Howard Products. We recommend that the finish be re-applied every 6 months in order to maintain the luster and appearance of the wood. All Thru-Block Products should be kept indoors in a warm and dry environment.
The Feed-N-Wax Oil and Wax Furniture Polish is available and may be purchased from the following company:
Howard Products Inc. Paso Robles, CA 93446
800)226-9545, or online at www.howardproducts.com