Measures Approximately 9.4" (W) X 6.2" (H)
made of 100% CLEAR CRYSTAL RHINESTONES.
Note: If you need more of this design, please let us know via convos and we can do a special listing for your needs.
The directions to apply are:
Use Cotton setting on iron. (Temp 325-350 degrees) DO NOT USE STEAM SETTING
Peel off textured backing from the design (stones should stick to the clear plastic sheet). If any stones have shifted out of place, put them back in place using tweezers.
Place the transfer on the garment where you want them with the adhesive side down.
Place clear plastic sheet, stone side down, on the right side of the fabric and press into place with hand. The clear plastic sheet should stick to the fabric. Make sure this does not shift!
Cover with a barrier (Teflon sheet works best).
Iron for 30 seconds making sure to cover entire design DO NOT MOVE IRON AROUND AS STONES MAY SHIFT
Allow the transfer to cool for approximately 3 minutes
Rub with cloth to help the stones stick to the fabric.
Slowly remove the plastic sheet - If all stones are not sticking, re-iron
Turn shirt inside out.
Place iron over design area and apply steady pressure for 15 seconds - DO NOT MOVE IRON AROUND AS STONES MAY SHIFT -
(Do not overheat or glue will lose its adhesion).
Allow to cool for 3 to 5 minutes.
Turn fabric to right side out.
Hand wash garment in cool water and air dry although most people wash items in the washing machine including me! If you are using professional equipment, it is definitely fine to wash in the washing machine and most designs can go directly in the dryer.