Etsy Shop for woodbyderaud

Laminated Bowl (no. 70)

Mon, 21 Dec 2009 10:01:56 -0500

$93.75
A turned wooden bowl made from vertical laminations of birch plywood.

6.25" diameter, 3.25" tall

Bowl (no. 67)

Mon, 21 Dec 2009 10:01:56 -0500

$90.00
A bowl turned from figured maple.

9" diameter, 2.5" tall

Bowl (no. 60)

Sun, 20 Dec 2009 09:51:06 -0500

$54.00
A bowl turned from Honduran mahogany.

5.4" diameter, 1.75" tall

Bowl (no. 23)

Sat, 19 Dec 2009 10:24:12 -0500

$70.00
A bowl turned from jatoba, a South American hardwood.

5" diameter, 2.75" tall

Aztec Calendar (24x24)

Sat, 19 Dec 2009 10:24:12 -0500

$180.00
This is a set of four 12"x12" laser-engraved granite tiles, suitable for use as a wallhanging or inset into a tile floor.

Other sizes available: please contact me for details.

(NOTE: this listing is for the four tiles ONLY. Mounting and/or framing is the responsibility of the buyer: please consult a tile professional if you are unclear how to do this. Total weight with appropriate backing and frame is around 30 lbs.)

Butterfly (24x34)

Fri, 18 Dec 2009 10:28:02 -0500

$400.00
Marquetry butterfly, approximately 24"x34", made from seven varieties of laser-cut veneers applied to a white melamine substrate, with a lacquer finish.

Woods are teak, birch, maple, ash, white oak, red oak, cherry, mahagony, and walnut.

(This item will require crating for shipment.)

Aztec Box

Fri, 18 Dec 2009 10:28:02 -0500

$125.00
A small memento box, 5.75"x5.75"x2.25" (inside dimensions). Made of jarrah, with a poplar liner and cedar inside the lid. Topped with a ceramic tile laser-engraved with the Aztec calendar.

Bowl (no. 17)

Thu, 17 Dec 2009 10:12:14 -0500

$75.00
A turned bowl made from ambrosia maple. The stripes are due to the secretions of the ambrosia beetle as it tunnels through the living tree.

5.5" diameter, 2" tall

Bowl (no. 14)

Thu, 17 Dec 2009 10:12:14 -0500

$95.00
A laminated hollowform turned from padauk, with an accent stripe of maple, walnut, and cherry.

4.75" diameter, 2.75" tall

Dragonfly 11x14

Wed, 16 Dec 2009 09:54:16 -0500

$30.00
A dragonfly laser-engraved on thin baltic birch plywood, 11"x14". (Image from my original photograph.)

Suitable for framing, but before you ask, no, I don't do frames.

Other sizes available, contact me for details.

Laminated Bowl (no. 4)

Tue, 15 Dec 2009 09:46:33 -0500

$75.00
A turned wooden bowl made from vertical laminations of birch plywood.

5" diameter, 3" tall

Laminated Bowl (no. 21)

Mon, 14 Dec 2009 10:52:24 -0500

$82.50
A turned bowl made from vertical laminations of maple and walnut.

5.5" diameter, 2.75" tall

Walnut Tealight Holder

Mon, 14 Dec 2009 10:52:24 -0500

$27.50
A turned tealight holder, made from walnut with a cast aluminum insert. 5"x1.75"

Cribbage Board 7

Sun, 13 Dec 2009 09:57:02 -0500

$70.00
A six-sided 2-person cribbage board, laser-cut from acrylic. Ships with a set of Columbia pegs.

8.25" corner to corner

Note that the board may be disassembled and a picture inserted if desired.

Cribbage Board 6

Sun, 13 Dec 2009 09:57:02 -0500

$50.00
A six-sided 2-person cribbage board, made from MDF, sealed and polished. Ships with a set of Columbia pegs.

8.25" corner to corner.

Cribbage Board 5

Sat, 12 Dec 2009 10:25:44 -0500

$80.00
A six-sided 2-person cribbage board, made from cherry, walnut, and maple. Ships with a set of Columbia pegs.

11.5" x 5.5"

Bowl (no. 63)

Fri, 11 Dec 2009 10:02:47 -0500

$62.50
A medium-sized bowl, turned from figured walnut.

6.25" diameter, 1.6" tall

Layered Bowl (no. 28)

Thu, 10 Dec 2009 10:10:55 -0500

$82.50
A turned wooden bowl made from layers of Peruvian walnut, bubinga, maple, and walnut.

5.5" diameter, 2.25" tall

Square Cherry Plate

Wed, 09 Dec 2009 12:41:42 -0500

$60.00
A turned square plate, made from cherry. 7" square

Cherry Tealight Holder

Wed, 09 Dec 2009 12:38:23 -0500

$45.00
A turned tealight holder, made from cherry with a cast aluminum insert. 8.25" tall

Round Walnut Tealight Holder

Wed, 09 Dec 2009 12:35:19 -0500

$27.50
A turned tealight holder, made from walnut with a cast aluminum insert. 3.75"x1.75"

Bowl (no. 37)

Wed, 09 Dec 2009 12:30:23 -0500

$70.00
A turned bowl, made from spalted and wormy maple. I know it looks like some kind of pottery from some angles, but it really is wood!

5.25"x2.5"

Bowl (no. 32)

Wed, 09 Dec 2009 12:24:35 -0500

$105.00
A turned bowl made from ambrosia maple. The stripes are due to the secretions of the ambrosia beetle as it tunnels through the living tree.

7.75" diameter, 3.5" tall. This is a nice heavy piece, suitable for display on a low table in a house with hyperactive dogs (don't ask me how I know that)

Bowl (no. 71)

Wed, 09 Dec 2009 09:56:55 -0500

$90.00
Shallow bowl/dish turned from pecan.

9" diameter, 1.5" tall.

Spalted Maple Tealight Holder

Wed, 09 Dec 2009 09:56:55 -0500

$18.75
A turned tealight holder, made from spalted maple with a cast aluminum insert. 3.75"x2"

Butterfly, 11x14

Tue, 08 Dec 2009 10:05:39 -0500

$30.00
A Gulf Frittilary butterfly laser-engraved on thin baltic birch plywood, 11"x14". (Image from my original photograph.)

Suitable for framing, but before you ask, no, I don't do frames.

Other sizes available, contact me for details.

Pike's Peak, North Face (8x32)

Mon, 07 Dec 2009 11:43:57 -0500

$175.00
Marquetry landscape, approximately 8"x32", made from seven varieties of laser-cut veneers applied to a black melamine substrate, with a lacquer finish. Original photo taken from between Colorado Springs and Denver.

Woods are teak, birch, ash, oak, cherry, mahagony, and walnut.

(This item will require crating for shipment.)

Layered Bowl (no. 46)

Sun, 06 Dec 2009 10:17:58 -0500

$73.50
A turned wooden bowl made from layers of Peruvian walnut, shedua, and spalted maple.

4.9" diameter, 1.9" tall

Layered Bowl (no. 44)

Sat, 05 Dec 2009 11:55:45 -0500

$69.00
A turned wooden bowl made from layers of leopardwood and bubinga.

4.6" diameter, 1.9" tall

Laminated Bowl (no. 12)

Fri, 04 Dec 2009 09:49:49 -0500

$90.00
A turned bowl made from vertical laminations of maple and walnut.

6" diameter, 2" tall

Maple Tealight Holder

Thu, 03 Dec 2009 10:19:02 -0500

$20.00
A turned tealight holder, made from figured maple with a cast aluminum insert. 2.25"x4"

Bowl (no. 8)

Wed, 02 Dec 2009 10:00:07 -0500

$87.50
This is turned from lyptus, a mahogony/eucalyptus hybrid plantation-grown in South America.

8.75" diameter, 1.75" tall.

Triangular Dish

Tue, 01 Dec 2009 09:56:00 -0500

$75.00
A turned dish, made from European beech, 7.5"x1.5".

Cribbage Board 4

Tue, 01 Dec 2009 09:55:59 -0500

$70.00
A circular 2-person cribbage board, laser-cut from acrylic. Ships with a set of Columbia pegs.

Note that the board may be disassembled and a picture inserted if desired.

8" diameter

Rosette (21x22)

Thu, 19 Nov 2009 10:25:52 -0500

$125.00
Abstract rosette pattern, made from ten varieties of veneer, laser-cut and applied to plywood substrate, with lacquer finish. Approximately 22"x21".

From center outwards, the woods are teak, birch, maple, ash, plainsawn white oak, quartersawn white oak, red oak, cherry, mahagony, and walnut.

(This item will require crating for shipment.)

Bowl (no. 54)

Wed, 18 Nov 2009 11:14:06 -0500

$95.00
This is turned from a chunk of aspen. The color is due to a dye that was injected around the roots of the tree while it was still alive and carried up into the wood.

6.5" diameter, 3" tall

Layered Bowl (no. 65)

Tue, 17 Nov 2009 10:04:27 -0500

$67.50
A turned wooden bowl made from layers of Peruvian walnut, canarywood, and jatoba.

4.5" diameter, 1.5" tall

Layered Bowl (no. 47)

Mon, 16 Nov 2009 10:00:03 -0500

$67.50
A turned wooden bowl made from layers of spalted maple, Peruvian walnut, and canarywood.

4.5" diameter, 1.75" tall

Layered Bowl (no. 45)

Sun, 15 Nov 2009 10:09:03 -0500

$67.50
A turned wooden bowl made from layers of Peruvian walnut and canarywood.

4.5" diameter, 1.75" tall

Layered Bowl (no. 26)

Sat, 14 Nov 2009 10:08:38 -0500

$86.25
A turned wooden bowl made from layers of bloodwood, canary, shedua, and maple.

5.75" diameter, 2.25" tall

Butterfly on granite 12x12

Fri, 13 Nov 2009 09:53:09 -0500

$45.00
A Gulf Frittilary butterfly engraved on a 12"x12" black granite tile. (Image from my original photograph.)

Can be used as a trivet, a wall hanging, or even inlayed into a tile floor.

Other sizes available, contact me for details.

(Note on shipping: due to their size and weight, these cannot be shipped in the same box with other items.)

Pike's Peak, East Face (8x32)

Thu, 12 Nov 2009 10:25:26 -0500

$175.00
Marquetry landscape, approximately 8"x32", made from seven varieties of laser-cut veneers applied to a black melamine substrate, with a lacquer finish. Original photo taken from just north of Colorado Springs.

Woods are teak, birch, ash, oak, cherry, mahagony, and walnut.

(This item will require crating for shipment.)

Spiral Bowl (no. 50)

Wed, 11 Nov 2009 10:25:59 -0500

$137.50
A turned wooden bowl made from thin wood laminations. Each layer is mostly walnut, with maple and jatoba accents.

5.5" diameter, 2.0" tall

Bowl (no. 3)

Tue, 10 Nov 2009 09:47:09 -0500

$57.50
A small bowl, turned from padauk.

5.75" diameter by 1.75" tall

Bowl (no. 69)

Mon, 09 Nov 2009 10:35:12 -0500

$75.00
A bowl turned from osage orange, a very dense heavy wood. Osage orange not an orange, but is related to the mulberry, and is found in the central southern and plains states.

6" diameter, 2.75" tall

Bowl (no. 68)

Sun, 08 Nov 2009 10:30:45 -0500

$75.00
A turned bowl made from ambrosia maple. The markings are due to the secretions of the ambrosia beetle as it tunnels through the living tree.

5.5" diameter, 3.75" tall