Etsy Shop for GetPersonalArt

New New York City Skyline Cuff, Laser cut and Laser Etched, Hand Painted Smokey Translucent Acrylic

Tue, 15 Dec 2009 21:08:21 -0500

$35.00
This New York City skyline is made with translucent smokey acrylic. I can do almost every design from my shop with this. Swarovski Crystals can be added for a small additional fee, let me know.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in smokey translucent acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Ice Cube, Laser Cut and engraved, Hand Painted With Swarovski Crystals, Teardrop Glass Beads on Copper Wire Cuff

Tue, 15 Dec 2009 21:07:57 -0500

$45.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Ice Cube- 5 tear drop glass beads on copper wire through center
Width- 2.5inches
Swarovski Crystals- 4 light blue, 2 dark blue
Colors- hues of blues, green, white

Paris Passion, Laser Cut and Engraved Smokey Translucent Acrylic, Hand Painted With Swarovski Crystals Cuff

Tue, 15 Dec 2009 21:07:57 -0500

$50.00
Eiffel Tower on Translucent Smokey Acrylic, Large Fuchsia, and Small Rose Swarovski Crystals. I can do almost every design from my shop with this acrylic.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in smokey translucent acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Paris Skyline Cuff, Laser Cut and Laser Engraved Acrylic, Hand Painted

Tue, 08 Dec 2009 19:11:07 -0500

$30.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

These Cuffs were inspired by artish.etsy! Check out her store! She is awesome!

The Beatles Pendant, Laser Cut and Laser Engraved, Hand Painted with Swarovski Crystals

Tue, 08 Dec 2009 19:09:51 -0500

One Hundred Dollar Bill Cuff, Laser Cut and Engraved Hand Painted Acrylic

Tue, 08 Dec 2009 19:09:35 -0500

$20.00
Always have a hundred dollars at hand;)

I can add Swarovski Crystals for a small charge, let me know.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Las Vegas Skyline Cuff, Laser cut and Laser Etched, Hand Painted Acrylic

Sat, 28 Nov 2009 01:37:14 -0500

$35.00
Las Vegas Skyline Cuff

I can add Swarovski Crystals, and I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Cool Flake, Laser Cut and Laser Etched, Hand Painted Acrylic Personalized Snowflake

Wed, 18 Nov 2009 12:46:12 -0500

$45.00
This flake will be personalized for you!!! Just let me know what you would like. CHOOSE YOUR FLAKE DESIGN! (1-6) I use the snowflake lettering, a small fee may be needed for extra computer work.

Cool flakes of acrylic, laser cut into icy forms of wintry delights. Don’t catch them on your nose or eyelashes or you’ll end up with bruises and gashes. Just hang them up, and don’t worry they won’t melt! They can be made with names to make name-flakes, or with pictures to make family-flakes, frosted to make frosty-flakes, even mirror acrylic for reflection-flakes, or something special if you’re feeling more flakey than I am. I can make a unique flake for each special person in your family that can be hung in a window by a suction cup to make a one of a kind display. If someone in your family is a little extra flakey, I can make one a little larger to express how special they are. They are very versatile and can be adorned with beads, pendants, or even Swarovski Crystals. OK, so I admit that I am more than a little flakey, but isn’t there at least one in every family?

This Flake- Laser cut using 1/4 inch thick (not my typical thinner 1/8) crystal clear acrylic. is about 11.5 inches at widest point. It will be personalized with the name or simple phrase you wish, and decorated with some beads. I hand wire wrap a big coiled colored hook and make a big floppy red bow to top it off. I will also enclose a big suction cup for a window hanger. I can make it even more personalized if you desire:)

Golden Handcuff Bangles, Laser Etched and Cut 1/4 inch thick acrylic, Hand Painted With Swarovski Crystals

Tue, 17 Nov 2009 23:09:31 -0500

$60.00
I created these handcuff bangles by designing them on my computer. Then engraved and cut them with a laser from 1/4 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Silvery Handcuff Necklace, Laser Cut and Etched Hand Painted Acrylic (1/8 in thick) With Swarovski Crystals

Tue, 17 Nov 2009 23:09:30 -0500

$30.00
These are big, in a good way:)

These glitzy pendants are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic (1/8 inch thick, they can be made in 1/4 inch) for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I then choose the Swarovski Crystals to accent the piece with shimmer and shine. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. You will get a silver color cable type with a barrel closure (not as shiny as the one in the photo, it looks better).

When it's hanging the length is about 4 3/4 inches from the jump rings to the bottom of the lower cuff. Each handcuff is 2 1/4 wide and tall. The key is 1 3/8 long. There are crystals on both sides of the handcuffs as well:)

White Wine Glass Necklace, laser cut and engraved acrylic hand painted with Swarovski Crystals

Tue, 17 Nov 2009 00:13:17 -0500

$15.00
I designed the wine glass pendant on this necklace and cut and engraved it with my laser and then hand painted it and applied Swarovski Crystals. I could put almost any color on them, just in case you enjoy a white wine. The necklace has a barrel closure and is a cable type with a translucent wine color on it. It is very comfortable to wear. The pendant is about 2 inches long.

Rock Candy, Laser cut and engraved, hand painted cuff bracelet with Swarovski Crystals

Sat, 14 Nov 2009 11:23:06 -0500

$40.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Rock Candy- laser engraved design, 1/8inch thick acrylic
Width- 1.5 inches
Swarovski Crystals- 5 volcano, 16 clear
Colors- hand painted hot pink, orange, yellow

Here Comes the Bride, Laser Cut and Engraved, Hand Painted With Swaroski Crystals, Bride Cuff

Sat, 14 Nov 2009 11:23:06 -0500

$45.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Here Comes the Bride-
Width- 2inches at widest
Swarovski Crystals- 6 large clear, 18 clear
Colors- white, blue

Hot Spot, Laser Cut and Engraved, Hand Painted With Swarovski Crystals Cuff

Sat, 14 Nov 2009 11:23:05 -0500

Black Rose and Lace Pendant, Laser Cut and Engraved, Hand Painted With Swarovski Crystals

Tue, 10 Nov 2009 11:33:55 -0500

Black Rose and Lace Cuff Bracelet, Laser Cut and Engraved, Hand Painted With Swarovski Crystals

Tue, 10 Nov 2009 11:33:55 -0500

$40.00
This one is inspired by my friend susieQjewels.etsy.com

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Chicago Skyline Cuff, Laser cut and Laser Etched, Hand Painted Acrylic with Swarovski Crystals

Thu, 05 Nov 2009 16:25:18 -0500

$40.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

CAN BE MADE WITHOUT THE LETTERING OR CRYSTALS, just convo me:)

Purple and BlueFlutter By, Laser Cut and Engraved, Hand Painted Cuff Bracelet With Swarovski Crystals

Thu, 05 Nov 2009 16:14:41 -0500

$45.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Flutter By
Width- 2inches at widest
Swarovski Crystals- 9 volcano and 11 smaller clearCrystals
Colors- purple, blue, white

White Wine Glass Key Chain, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Thu, 05 Nov 2009 01:22:17 -0500

$15.00
These key chains are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I add color by hand painting them. I then apply Swarovski Crystals to accent the piece with shimmer and shine. Please allow a week to make:)

Red Wine Glass Key Chain, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Thu, 05 Nov 2009 01:17:52 -0500

White Wine Glass Earrings, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Thu, 05 Nov 2009 00:39:11 -0500

$20.00
I created these red wine glass earrings by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I use sterling silver hooks. They are all made to order, so slight color variations will happen.

Red Wine Glass Earrings, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Thu, 05 Nov 2009 00:34:18 -0500

White Wine Glass Cuff, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Thu, 05 Nov 2009 00:21:22 -0500

$30.00
I created these wine glass cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Red Wine Glass Cuff, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Thu, 05 Nov 2009 00:15:01 -0500

Red and White Wine Glass Cuff, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Thu, 05 Nov 2009 00:07:37 -0500

$40.00
I created these wine glass cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Paris Passion, Laser Cut and Engraved Acrylic, Hand Painted With Swarovski Crystals Cuff

Wed, 04 Nov 2009 09:30:43 -0500

$50.00
Paris Passion-
Width- very close to 1.5inches
Swarovski Crystals- 15 clear, 31 smaller clear
Colors- pale pink

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

The Beatles Abbey Road Keychain, Laser Cut and Laser Engraved, Hand Painted with Swarovski Crystals

Wed, 04 Nov 2009 09:30:43 -0500

$15.00
These key chains are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I add color by hand painting them. I can then apply Swarovski Crystals to accent the piece with shimmer and shine if desired. Please allow a week to make:)

L.A., Los Angeles City Skyline Cuff, Laser Cut and Laser Etched, Hand Painted Acrylic with Swarovski Crystals

Wed, 04 Nov 2009 09:30:43 -0500

$45.00
I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Width- 2 inches
Colors- pink, orange, yellow
More than 25 Swarovski Crystals; clear, topaz, opal -mixed

Please include your wrist measurement :)

Nice Rack, Wine Bottle Earrings, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Wed, 04 Nov 2009 01:23:56 -0500

$25.00
I created these wine earrings by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I use sterling silver hooks. They are all made to order, so slight color variations will happen.

Nice Rack, Wine Bottle Earrings, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Wed, 04 Nov 2009 01:19:58 -0500

Nice Rack, Wine Bottle Earrings, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Wed, 04 Nov 2009 01:13:54 -0500

Nice Rack, Wine Bottle Earrings, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Wed, 04 Nov 2009 01:04:18 -0500

Paris Passion, Laser Cut and Laser Etched, Hand Painted with Swarovski Crystals Pendant

Tue, 03 Nov 2009 19:12:58 -0500

$8.00
These glitzy pendants are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I then choose the Swarovski Crystals to accent the piece with shimmer and shine. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. Select your own favorite necklace, chain, or cord, I may add some in the near future.

Paris Passion- This pendant is 2.25 inches long with the two copper tone jump rings. It is about 1 inch wide at the bottom. It has 4 smaller, and one larger pink Swarovski Crystals.

Sydney Australia Cuff, Laser etched and Laser Cut, Hand Painted City Skyline

Tue, 03 Nov 2009 11:32:12 -0500

The Beatles Abbey Road Cuff, Laser Cut and Laser Engraved, Hand Painted with Swarovski Crystals

Tue, 03 Nov 2009 11:29:44 -0500

$35.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Fall Leaves in Autumn Colors, Laser Cut and Laser Engraved, Hand Painted With Swarovski Crystals, Acrylic Cuff

Tue, 27 Oct 2009 22:05:54 -0400

$30.00
I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic (I could use 1/4 inch for a small additional fee). Next I hand painted them and apply the Swarovski Crystals. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (please allow one week for me to make it, Full payment due before shipping.)

Width- 1 1/4 inches
Swarovski Crystals- 8 fire opal Swarovski Crystals
Colors- red, yellow, orange, touch of light green

Please include your wrist measurement :)

Fall leaves in Autumn Colors Candle Cuff, Laser Cut and Laser Etched, Hand Painted Acrylic

Tue, 27 Oct 2009 22:05:32 -0400

$45.00
O.K. So I had a little fun with these! They are like my cuff bracelets, but they are for your candles. There are two pieces that sit around your favorite candle, allowing it to be a small votive or a larger candle. One piece has ends that curve in, and the other curves outward to fit together nicely. When the candle glows through them, the light casts a shadow across the table,and onto the wall in a flickering sort of way. They glisten and glow like you will not believe. I can create them in any fashion you desire, they can incorporate photos of kids, family, pets, homes, or even lettering. I am currently working a surprise for the holidays (so have your ornaments ready). Please convo me with any questions or comments.

I used TWO pieces -12- inches long!!! And about -4- inches wide, and after they were cut, I hand formed them. Each one is a bit different ;)

They measure about 3 1/2 inches tall, and can be positioned around your candle to span many sizes. The two pieces are cut from 1/8 inch acrylic. They can be designed taller as well!

Candle NOT included

Fall Leaves in Autumn Colors, Laser Cut and Laser Engraved, Hand Painted, Acrylic Cuff

Tue, 27 Oct 2009 22:05:31 -0400

$25.00
I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic (I could use 1/4 inch for a small additional fee). Next I hand painted them and apply the Swarovski Crystals. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (please allow one week for me to make it, Full payment due before shipping.)

Width- 1 1/4 inches

Please include your wrist measurement :)

Lucky Charm, Laser Cut and Engraved, Acrylic and Hand Painted With Swarovski Crystals Cuff

Tue, 27 Oct 2009 22:01:23 -0400

Custom Personalized Award, Plaque, Laser Cut, Laser Engraved Acrylic with Hand Made Wood Stand

Tue, 27 Oct 2009 22:01:22 -0400

$20.00
These are the perfect desk top awards or recognition plaques. They can be any shape, or have any lettering you wish. Use your logo or business name, even a photo or just about any idea you may have. They are cut from 1/4 inch acrylic and engraved. The wood stand can be engraved, or a different color. Price may vary based on design. These are about 5 inches wide, and 6 inches tall with stand. Price is for 1, I could do a group discount.

City Square, Laser cut and engraved, Hand Painted Cuff With Swarovski Crystals

Tue, 27 Oct 2009 22:01:22 -0400

$40.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

City Square- Laser cut and engraved, hand painted, Swarovski Crystals
Width- 2.5inches approx.
Swarovski Crystals- 36 clear Swarovski Crystals (9 each in 4 squares)
Colors- Lt. neon green, clear Swarovski Crystals

Bubble Gum Bobble Cuff, Laser Cut and Laser Etched Hand Painted Acrylic with Swarovski Crystals

Tue, 27 Oct 2009 22:01:22 -0400

$45.00
I finally, after a year, brought this out of my web site and into the land of Etsy:)

I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Width- 1.5 inches
Swarovski Crystals- 28 pink, topaz, opal, clear
Colors- pinks, oranges, yellows

Nice Rack, Wine Bottle Cuff, Laser Cut and Engraved Acrylic Hand Painted With Swarovski Crystals

Tue, 20 Oct 2009 17:14:46 -0400

$60.00
I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size). This cuff has topaz Swarovski Crystals.

Hollywood Sign Cuff, Laser Cut Laser Engraved Hand Painted Acrylic with Swarovski Crystals

Sat, 17 Oct 2009 22:33:59 -0400

$43.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Width- 1.5
Swarovski Crystals- 9 BIG clear, one in each letter for great sparkle!
Colors- This one is a pale yellow, I can do any color, I can make a special listing for your cuff :)

Kissy Fish, Laser Cut and Engraved, Hand Painted Acrylic Cuff

Fri, 16 Oct 2009 13:45:01 -0400

$40.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Kissy Fish
Width- 2inches at widest
Swarovski Crystals- 2 clear (eyes), 3 smaller clear (in the hearts)
Colors-

Colorful Fish Aquarium Cuff, Laser Cut and Laser Etched, Hand Painted Acrylic with Swarovski Crystals

Fri, 16 Oct 2009 13:45:01 -0400

$45.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Width- 2.25
Swarovski Crystals- 6 clear, 9 smaller opal color
Colors- Just about all that I could fit!

Pink Martini with Pink Pimento, Laser Cut and Laser Etched Acrylic, Hand Painted Pendant with Swarovski Crystal

Fri, 16 Oct 2009 13:44:32 -0400

$7.00
These glitzy pendants are created when I first begin by designing them on my computer. Then they are cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I then choose the Swarovski Crystal to accent the piece with shimmer and shine. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. Select your own favorite necklace, chain, or cord, I may add some in the near future.

Hangs diagonally at 3 inches. 2.5 inches across hanging.

Wine Glass Necklace, laser cut and engraved acrylic hand painted with Swarovski Crystals

Thu, 15 Oct 2009 09:20:43 -0400

Splash Laser Cut Cuff, Hand Painted with Swarovski Crystals

Thu, 15 Oct 2009 09:17:33 -0400

$55.00
This Cuff was created with inspiration from lizeedee.etsy Check out her store!

I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

-Splash Cuff- features little splash cut outs, and formed splash tops for a pop out effect. All cuffs are hand formed

-Width- 2 inches

-Swarovski Crystals- 15 assorted dark blue, light blue, and
light green

-Colors- blues, greens, aqua

Please let me know the size of your wrist (or the wrist it is for) when ordering;) or just convo me.

City Square in Aquas and Greens Pendant, Laser Cut and Laser Engraved Acrylic Hand Painted with Swarovski Crystals

Tue, 13 Oct 2009 10:04:22 -0400

$15.00
These glitzy pendants are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I then choose the Swarovski Crystals to accent the piece with shimmer and shine. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. Select your own favorite necklace, chain, or cord, I may add some in the near future.

2 3/4 inches long including jump ring, 9 light green and 9 clear Swarovski Crystals. I can do these in any color combo.

City Lights, Laser Etched and Laser Cut Acrylic, Hand Painted Pendant With Swarovski Crystals

Tue, 13 Oct 2009 10:04:22 -0400

$12.00
These glitzy pendants are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I then choose the Swarovski Crystals to accent the piece with shimmer and shine. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. Select your own favorite necklace, chain, or cord, I may add some in the near future.

City Lights Pendant- The center is laser cut out to make the skyline. It is cut from 1/8 thick crystal clear acrylic. It is 2.5 inches wide, and 1 3/4 inches tall with gold tone jump rings. It has 16 clear Swarovski Crystals. I used a bright yellow/green paint for the lights.

Key Chain coming soon.

City Lights, Laser cut and Engraved, Hand Painted Wtth Swarovski Crystals

Tue, 13 Oct 2009 10:04:22 -0400

$45.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

City Lights- laser cut city sky line, laser engraved and Swarovski "lights"
Width- 1 3/4inches top of Empire State Building to bottom
Swarovski Crystals- 36 small clear Swarovski Crystals
Colors- yellow/lime

Little Liberty Cuff, Laser Engraved Laser Cut, Hand Painted With Swarovski Crystals

Tue, 13 Oct 2009 10:04:22 -0400

Paris Passion Laser Etched and Laser Cut Hand Painted Pendant With Swarovski Crystals

Mon, 12 Oct 2009 21:24:43 -0400

$8.00
These glitzy pendants are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I then choose the Swarovski Crystals to accent the piece with shimmer and shine. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. Select your own favorite necklace, chain, or cord, I may add some in the near future.

Paris Passion- Hand painted pink etched Eiffel Tower on 1/8 inch thick crystal clear acrylic. It is 2.5 inches long with the 2 silver tone jump rings, and almost an inch wide at the bottom. It has 4 small, and one larger clear Swarovski Crystals.

Washington D C City Skyline Cuff Bracelet, Laser Cut and Laser Engraved, Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:24:43 -0400

Washington D C City Skyline Cuff Bracelet, Laser Cut and Laser Engraved, Hand Painted

Mon, 12 Oct 2009 21:24:42 -0400

Philladelphia City Skyline Cuff Bracelet, Laser Cut and Laser Engraved, Hand Painted

Mon, 12 Oct 2009 21:24:42 -0400

Statue of Liberty Key Chain, Laser Cut and Laser Engraved Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:22:39 -0400

$15.00
These key chains are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I add color by hand painting them. I can then apply Swarovski Crystals to accent the piece with shimmer and shine if desired.

Personalized YOUR Name Cuff Bracelet, Laser Cut and Engraved Acrylic Fluorescent Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:15:16 -0400

$30.00
Your name will be engraved on a cuff hand painted in fluorescent colors, also Swarovski Crystals will be applied. It will be made to custom fit, so please include your wrist measurement. Also any word can be used!

I can make pendants too, key chains, or anything you wish!

One Hundred Dollar Bill Pendant, Laser Cut and Engraved Hand Painted Acrylic

Mon, 12 Oct 2009 21:14:46 -0400

$8.00
These glitzy pendants are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I can add Swarovski Crystals to accent the piece with shimmer and shine for a small charge, just let me know. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. Select your own favorite necklace, chain, or cord, I may add some in the near future.

London Skyline, Laser Cut and Laser Etched Acrylic, Hand Painted Cuff

Mon, 12 Oct 2009 21:09:11 -0400

$30.00
I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic (I could use 1/4 inch for a small additional fee). Next I hand painted them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (please allow one week for me to make it, Full payment due before shipping.)

Width-
Colors-

These Cuffs were inspired by artish.etsy! Check out her store! She is awesome!

Buttons,Fall Leaves in Autumn Colors, Laser Cut and engraved, Hand Painted Acrylic, SET OF 6

Mon, 12 Oct 2009 21:07:30 -0400

$20.00
(this is for a SET OF 6)

I made these buttons by first designing them on my computer, and then laser cutting and etching them. Next I hand painted them in pretty fall colors. They are about 1 inch buttons, with two holes.

Falling Leaves in Autumn Colors, Laser Cut, Hand Painted Acrylic, Key Chain

Mon, 12 Oct 2009 21:07:30 -0400

$9.00
I designed this key chain on my computer, then laser cut and engraved it from 1/8 inch crystal acrylic. Next I hand painted it, and attached the ring. It measures 5 inches from the top to the tip.

Customized Acrylic Plaque

Mon, 12 Oct 2009 21:07:30 -0400

$45.00
These custom acrylic hanging plaques can be made with your favorite pictures, and any type of lettering. They feature laser cutting and engravings of custom designs or patterns of your choice or need. They can be up to 18 x 24 inches, and ¼ inch thick crystal clear acrylic. Hand painting can also be incorporated for extra pop. Also, custom hangers and decorative beads can be added. There are so many possibilities for a unique piece, for any occasion. Honoring a coach, a retirement, a teacher with a class picture (or student signatures), custom picture frames that appear to float, in memory plaques, pet pictures, new baby, wedding, anniversary, fund raisers for church or school, and so much more. I have done many of them, but usually forget to take photos, or they turn out bad. Since I have been on Etsy I have learned to take better photos of items, but I have some, including hand etched portraits on granite memorials on my web site at
GetPersonalArt.com.

-My Little Brother- This poem was written by my cousin Jenni. I met her for the first time about 2 years ago. We became good friends, when I learned she liked to write poetry, we decided do some type of project together. This is what we started with. I can incorporate another photo, or different shape or design for an additional fee if you wish. Please convo me to work out details.

Flutter By, Laser Cut and Laser Etched, Hand Painted with Swarovski Crystals Pendant

Mon, 12 Oct 2009 21:07:30 -0400

$15.00
These glitzy pendants are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I then choose the Swarovski Crystals to accent the piece with shimmer and shine. And to top them off I make the jump rings in coordinating colors to set them off. They are light weight to wear. Select your own favorite necklace, chain, or cord, I may add some in the near future.

Flutter By- This pendant is almost 3 inches long with a copper tone jump ring. It is 1.25 inches wide. It has 3 cute little laser etched, hand painted butterflies in purple, red, yellow, orange and white. It has a volcano, and 2 smaller clear Swarovski Crystals.

Flutter By, Laser Cut and Engraved, Hand Painted Cuff Bracelet With Swarovski Crystals

Mon, 12 Oct 2009 21:07:30 -0400

$45.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Flutter By
Width- 2inches at widest
Swarovski Crystals- 9 volcano and 11 smaller clear Swarovski Crystals
Colors- purple, red, orange, yellow, white

Romance Victorian Dangle Earrings, Laser Cut and Engraved Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:07:30 -0400

$20.00
I can add gold or silver and color if you wish, also color Swarovski Crystals. Slightly delicate, but I have worn mine for more than a week straight with out any problems. Any questions, please ask me:)

I created these earrings by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. If you have a color preference, just let me know. The earrings that are ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make them).

I live out in the corn fields in southeast Michigan, pretty much centered in between the local towns of 10 to 15 miles away. The closest being Blissfield. Yep, a big happy field, like the name implies. Anyway, I do all of my shipping from the local old brick post office close to the center of town. It is filled with fabulous antique stores that are frequented by shoppers from our neighboring cities and towns, being that it is on the way to most of the summer lake house destinations of getaway vacationers. My favorite antique mall sits on the corner of the main intersection. The building has 2 or 3 floors of antiques (I never figured it out), room after room, corner after corner winding throughout the building. I mean it when I say you can get lost in there. Seeming like the floor will give way at any step, it creeks and groans coaxing you deeper and deeper into the old musty discoveries waiting to find a new home. Amidst all of this, I discovered copies of OLD Blissfield photo postcards that I include in all of my packages (perhaps you want one?). So when I run out of them, I just go get lost in the mall for a while and pick up some more while I'm there. This all leads to my inspiration for this set I promise! I usually enter in the side door, however that day was nice and warm. The boutique next door had their front door open, so I knew I could browse and then enter the mall from inside that store. I knew I was in for a discovery when I went in. I came across a little old basket filled with torn out pages from a very old book with amazing illustrations of antique jewelry and art over 100 years old! So I thought about it for a minute, and then looked through every single one to get all of the good ones I could, and I did:) I came home after getting my postcards, that I originally only needed in the first place, and was so inspired that I worked for a week straight on this set. I have more ideas to come from all of this! So now I wonder if I should go in all of the doors I see propped open, perhaps there is inspiration inside;)

From what I can gather from the book is; The Great Exhibition, 1876. "The Main Building". (my house was built in 1881, that put's things into perspective:) -Necklace inspired by Bellezza, of Rome.

-in an endeavor to do true, honest work, using the old masters simply as instructors who shall guide the student and encourage him to develop his own ideas, and not become a servile imitator. ~ This is a little something saved from the book, I thought it was fitting. (Thanks to the old masters!)

Romance Victorian Rope Dangle Earrings, Laser Cut and Engraved Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:07:30 -0400

$25.00
I can add gold or silver and color if you wish, also color Swarovski Crystals. Slightly delicate, but I have worn mine for more than a week straight with out any problems. Any questions, please ask me:)

I created these earrings by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. If you have a color preference, just let me know. The earrings that are ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make them).

I live out in the corn fields in southeast Michigan, pretty much centered in between the local towns of 10 to 15 miles away. The closest being Blissfield. Yep, a big happy field, like the name implies. Anyway, I do all of my shipping from the local old brick post office close to the center of town. It is filled with fabulous antique stores that are frequented by shoppers from our neighboring cities and towns, being that it is on the way to most of the summer lake house destinations of getaway vacationers. My favorite antique mall sits on the corner of the main intersection. The building has 2 or 3 floors of antiques (I never figured it out), room after room, corner after corner winding throughout the building. I mean it when I say you can get lost in there. Seeming like the floor will give way at any step, it creeks and groans coaxing you deeper and deeper into the old musty discoveries waiting to find a new home. Amidst all of this, I discovered copies of OLD Blissfield photo postcards that I include in all of my packages (perhaps you want one?). So when I run out of them, I just go get lost in the mall for a while and pick up some more while I'm there. This all leads to my inspiration for this set I promise! I usually enter in the side door, however that day was nice and warm. The boutique next door had their front door open, so I knew I could browse and then enter the mall from inside that store. I knew I was in for a discovery when I went in. I came across a little old basket filled with torn out pages from a very old book with amazing illustrations of antique jewelry and art over 100 years old! So I thought about it for a minute, and then looked through every single one to get all of the good ones I could, and I did:) I came home after getting my postcards, that I originally only needed in the first place, and was so inspired that I worked for a week straight on this set. I have more ideas to come from all of this! So now I wonder if I should go in all of the doors I see propped open, perhaps there is inspiration inside;)

From what I can gather from the book is; The Great Exhibition, 1876. "The Main Building". (my house was built in 1881, that put's things into perspective:) -Necklace inspired by Bellezza, of Rome.

-in an endeavor to do true, honest work, using the old masters simply as instructors who shall guide the student and encourage him to develop his own ideas, and not become a servile imitator. ~ This is a little something saved from the book, I thought it was fitting. (Thanks to the old masters!)

Romance and Filigree Victorian Collar Necklace, Laser Cut and Engraved Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:07:30 -0400

$55.00
I can add gold or silver and color if you wish, also color Swarovski Crystals. This necklace has a sterling silver lobster claw clasp, which allows you to choose the link to hook it to, and allow a perfect fit. It is also hand molded to fit the curves of your body to assure comfortable wear. The chain dangles down the back of you neck, and has Swarovski crystals on both sides of each of the two dangles. The bottom dangle on the pendant has Swarovski Crystals on each side also for sparkle during movement. Slightly delicate, but I have worn mine for more than a week straight with out any problems (all pieces of this set). Everyone FREAKS out when they see it! You will get sooooo many compliments on it! Any questions, please ask me:)

I live out in the corn fields in southeast Michigan, pretty much centered in between the local towns of 10 to 15 miles away. The closest being Blissfield. Yep, a big happy field, like the name implies. Anyway, I do all of my shipping from the local old brick post office close to the center of town. It is filled with fabulous antique stores that are frequented by shoppers from our neighboring cities and towns, being that it is on the way to most of the summer lake house destinations of getaway vacationers. My favorite antique mall sits on the corner of the main intersection. The building has 2 or 3 floors of antiques (I never figured it out), room after room, corner after corner winding throughout the building. I mean it when I say you can get lost in there. Seeming like the floor will give way at any step, it creeks and groans coaxing you deeper and deeper into the old musty discoveries waiting to find a new home. Amidst all of this, I discovered copies of OLD Blissfield photo postcards that I include in all of my packages (perhaps you want one?). So when I run out of them, I just go get lost in the mall for a while and pick up some more while I'm there. This all leads to my inspiration for this set I promise! I usually enter in the side door, however that day was nice and warm. The boutique next door had their front door open, so I knew I could browse and then enter the mall from inside that store. I knew I was in for a discovery when I went in. I came across a little old basket filled with torn out pages from a very old book with amazing illustrations of antique jewelry and art over 100 years old! So I thought about it for a minute, and then looked through every single one to get all of the good ones I could, and I did:) I came home after getting my postcards, that I originally only needed in the first place, and was so inspired that I worked for a week straight on this set. I have more ideas to come from all of this! So now I wonder if I should go in all of the doors I see propped open, perhaps there is inspiration inside;)

From what I can gather from the book is; The Great Exhibition, 1876. "The Main Building". (my house was built in 1881, that put's things into perspective:) -Necklace inspired by Bellezza, of Rome.

-in an endeavor to do true, honest work, using the old masters simply as instructors who shall guide the student and encourage him to develop his own ideas, and not become a servile imitator. ~ This is a little something saved from the book, I thought it was fitting. (Thanks to the old masters!)

Romance and Filigree Victorian Collar Necklace, cuff, and Earring Set, Laser Cut and Engraved Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:07:30 -0400

$85.00
I can add gold or silver and color if you wish, also color Swarovski Crystals. This necklace has a sterling silver lobster claw clasp, which allows you to choose the link to hook it to, and allow a perfect fit. It is also hand molded to fit the curves of your body to assure comfortable wear. The chain dangles down the back of you neck, and has Swarovski crystals on both sides of each of the two dangles. The bottom dangle on the pendant has Swarovski Crystals on each side also for sparkle during movement. This cuff has 3 dangle charms with Swarovski Crystals. Slightly delicate, but I have worn mine for more than a week straight with out any problems (all pieces of this set). Everyone FREAKS out when they see it! You will get sooooo many compliments on it! Any questions, please ask me:)

I created these jewelry pieces by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The jewelry will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your wrist size).

I live out in the corn fields in southeast Michigan, pretty much centered in between the local towns of 10 to 15 miles away. The closest being Blissfield. Yep, a big happy field, like the name implies. Anyway, I do all of my shipping from the local old brick post office close to the center of town. It is filled with fabulous antique stores that are frequented by shoppers from our neighboring cities and towns, being that it is on the way to most of the summer lake house destinations of getaway vacationers. My favorite antique mall sits on the corner of the main intersection. The building has 2 or 3 floors of antiques (I never figured it out), room after room, corner after corner winding throughout the building. I mean it when I say you can get lost in there. Seeming like the floor will give way at any step, it creeks and groans coaxing you deeper and deeper into the old musty discoveries waiting to find a new home. Amidst all of this, I discovered copies of OLD Blissfield photo postcards that I include in all of my packages (perhaps you want one?). So when I run out of them, I just go get lost in the mall for a while and pick up some more while I'm there. This all leads to my inspiration for this set I promise! I usually enter in the side door, however that day was nice and warm. The boutique next door had their front door open, so I knew I could browse and then enter the mall from inside that store. I knew I was in for a discovery when I went in. I came across a little old basket filled with torn out pages from a very old book with amazing illustrations of antique jewelry and art over 100 years old! So I thought about it for a minute, and then looked through every single one to get all of the good ones I could, and I did:) I came home after getting my postcards, that I originally only needed in the first place, and was so inspired that I worked for a week straight on this set. I have more ideas to come from all of this! So now I wonder if I should go in all of the doors I see propped open, perhaps there is inspiration inside;)

From what I can gather from the book is; The Great Exhibition, 1876. "The Main Building". (my house was built in 1881, that put's things into perspective:) -Necklace inspired by Bellezza, of Rome.

-in an endeavor to do true, honest work, using the old masters simply as instructors who shall guide the student and encourage him to develop his own ideas, and not become a servile imitator. ~ This is a little something saved from the book, I thought it was fitting. (Thanks to the old masters!)

Romance and Filigree Victorian Cuff, Laser Cut and Engraved Hand Painted with Swarovski Crystals

Mon, 12 Oct 2009 21:07:29 -0400

$45.00
I can add gold or silver and color if you wish, also color Swarovski Crystals. This cuff has 3 dangle charms with Swarovski Crystals. Slightly delicate, but I have worn mine for more than a week straight with out any problems. Any questions, please ask me:)

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

I live out in the corn fields in southeast Michigan, pretty much centered in between the local towns of 10 to 15 miles away. The closest being Blissfield. Yep, a big happy field, like the name implies. Anyway, I do all of my shipping from the local old brick post office close to the center of town. It is filled with fabulous antique stores that are frequented by shoppers from our neighboring cities and towns, being that it is on the way to most of the summer lake house destinations of getaway vacationers. My favorite antique mall sits on the corner of the main intersection. The building has 2 or 3 floors of antiques (I never figured it out), room after room, corner after corner winding throughout the building. I mean it when I say you can get lost in there. Seeming like the floor will give way at any step, it creeks and groans coaxing you deeper and deeper into the old musty discoveries waiting to find a new home. Amidst all of this, I discovered copies of OLD Blissfield photo postcards that I include in all of my packages (perhaps you want one?). So when I run out of them, I just go get lost in the mall for a while and pick up some more while I'm there. This all leads to my inspiration for this set I promise! I usually enter in the side door, however that day was nice and warm. The boutique next door had their front door open, so I knew I could browse and then enter the mall from inside that store. I knew I was in for a discovery when I went in. I came across a little old basket filled with torn out pages from a very old book with amazing illustrations of antique jewelry and art over 100 years old! So I thought about it for a minute, and then looked through every single one to get all of the good ones I could, and I did:) I came home after getting my postcards, that I originally only needed in the first place, and was so inspired that I worked for a week straight on this set. I have more ideas to come from all of this! So now I wonder if I should go in all of the doors I see propped open, perhaps there is inspiration inside;)

From what I can gather from the book is; The Great Exhibition, 1876. "The Main Building". (my house was built in 1881, that put's things into perspective:) -Necklace inspired by Bellezza, of Rome.

-in an endeavor to do true, honest work, using the old masters simply as instructors who shall guide the student and encourage him to develop his own ideas, and not become a servile imitator. ~ This is a little something saved from the book, I thought it was fitting. (Thanks to the old masters!)

Statue of Liberty Earrings, Laser Cut and Laser Engraved Hand Painted with Swarovski Crystals

Tue, 06 Oct 2009 16:45:19 -0400

$25.00
These earrings are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I add color by hand painting them. I can then apply Swarovski Crystals to accent the piece with shimmer and shine if desired. They have sterling silver ear wires.

Rainbow Hollywood Sign Cuff, Laser Cut Laser Engraved Hand Painted Acrylic with Swarovski Crystals

Wed, 16 Sep 2009 20:08:35 -0400

$50.00
I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Width- 1.5
Swarovski Crystals- 18 BIG rainbow, 2 in each letter for great sparkle!
Colors- Rainbow

New New York City Skyline Cuff, Laser cut and Laser Etched, Hand Painted Acrylic

Mon, 14 Sep 2009 15:26:04 -0400

City Square, Laser Cut and Engraved Acrylic, Hand Painted Cuff With Swarovski Crystals

Thu, 27 Aug 2009 15:57:13 -0400

$48.00
36 big Swarovski Crystals :)

I can make any color you wish.

I created these cuffs by designing them on my computer. Then engraved and cut them with a laser from 1/8 in crystal clear acrylic. Next I hand paint them. I can make variations of the designs, color, and add names or almost any thing. They are all made to order, so slight color variations will happen. I make them in a size to custom fit you, so just send the measurement of the circumference of your wrist, they will be a little larger than the measurement. If you have a color preference, just let me know. The bracelet that is ordered from this listing will be made as close to the photo listed as possible, if you would like more than a color change, it may have to be a custom order. (Please allow at least one week for me to make it after I have your size).

Width- 2.5inches approx.
Swarovski Crystals- 36 clear Swarovski Crystals (9 each in 4 squares)
Colors- Lt. neon green, purple

note; this is a little more expensive than the single color just because of the extra work ;)

Custom Personalized Award, Plaque, Hand Painted, Laser Cut, Laser Engraved Acrylic with Hand Made Wood Stand

Thu, 27 Aug 2009 15:57:13 -0400

$30.00
These are the perfect desk top awards or recognition plaques. They can be any shape, or have any lettering you wish. Use your logo or business name, even a photo or just about any idea you may have. They are cut from 1/4 inch acrylic and engraved. These can be hand painted. The wood stand can be engraved, or a different color. Price may vary based on design. These are about 5 inches wide, and 6 inches tall with stand (almost any size can be made). Price is for 1, I could do a group discount. A custom listing may be needed and prices may be adjusted due to additional details.

Paris Passion, Laser cut and Laser Engraved, Hand Painted with Swarovski Crystals Key Chain

Mon, 24 Aug 2009 16:45:31 -0400

$10.00
These little key chains are created when I first begin by designing them on my computer. Then they are precisely cut by laser from crystal clear acrylic for maximum flash. Some are decorated further with engraved detail on the surface and hand painted. I add color by hand painting them. I then choose the Swarovski Crystals to accent the piece with shimmer and shine.

Length- About 5 inches

Width- 1.25 inches at bottom

Swarovski Crystals- 4 smaller and one larger clear

Colors- pink