Etsy Shop for bettula

Mushrooms and Leaves, birch bark necklace

Sat, 19 Dec 2009 15:59:56 -0500

$42.00
Three pieces of beautiful birch bark hang on a vintage gold chain. Center leaf has a cluster of small shelf mushrooms and a tiny bit of lichen. Chain length is 22" long and can be shortened if you would like. An earthy and feminine piece for the nature lover in you.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

Ivory leaves, birch bark earrings

Sat, 19 Dec 2009 15:12:35 -0500

$22.00
Simple leaf shaped earrings made from birch bark that have lever back earring hooks. The hook and rings are a bronze color. The back of the earrings are a burnt sienna and will show when worn as they twist and dangle.
The length including the hook is 3 3/4" and the width is 1".

Birch bark is durable but not indestructible. There is a protective clear coat applied to both sides of earrings.
The bark is naturally water resistant but long periods of exposure are not recommended. When my pieces are handled and stored with care and grace they will be long lasting.

Stems, birch bark earrings

Sat, 19 Dec 2009 15:12:34 -0500

$28.00
These earrings have extra long length with unique markings on each piece. A simple statement that will look great with anything. They have ivory coloring on one side and a rich brown on the reverse side. Very light weight and reversible these earrings can easily become your favorite everyday wear or a great unique gift.

Length including hooks is 5" and width is 1/2".

Out of the Woods III, wall decor

Fri, 18 Dec 2009 14:31:20 -0500

$16.00
Out of the Woods III.
Very simple and chic home decor that can be hung in any room to add some of the outdoors. These look great in groupings because each piece of bark is different so you have a similiar design but with unique markings.

The bark is in a 4" by 6" frame sandwiched between wood and glass. Metal clips hold the layers together and also can be used to hang the piece on the wall. This can be hung vertical or horizontal.

Around, birch bark earrings

Fri, 18 Dec 2009 14:31:20 -0500

$26.00
This earring shape has been a favorite with my customers for the past couple of years. If you are looking for a gift or something for yourself these earrings will not let you down. Very lightweight and easy to wear with your everyday look. They are simple and have the bright white bark with nice dark lines.

Length including hooks is 2 1/2" and width is 1 3/8", just under a 1/2".

Birch bark is durable but not indestructible. There is a protective clear coat applied to both sides of earrings.
The bark is naturally water resistant but long periods of exposure are not recommended. When my pieces are handled and stored with care and grace they will be long lasting.

Driftwood necklace

Fri, 18 Dec 2009 14:31:20 -0500

$85.00
Beautiful driftwood pieces from Lake Huron that I have used to create this one of a kind necklace. The knotty dark cocoa centers have a great contrast with the golden sand color outer wood. Pieces are strong and have been sanded to a smooth finish. Each piece is sealed . Looks amazing on and no one will have this except you!
Chain is bronze and easily slides over your head.

Little Darling, bow tie birch bark necklace

Fri, 18 Dec 2009 01:58:58 -0500

$38.00
Handmade birch bark bow in cinnamon brown placed high on the neckline of this necklace. A golden key and faceted gem hang together and add sparkle. Hung on a vintage golden chain that can be shortened if you would like.

Bow measures 2 1/2" in width and 2" in height.
Chain length is 31".

Droplets, birch bark necklace

Thu, 17 Dec 2009 20:06:28 -0500

$26.00
Three little pieces of bark shaped like drops of water cluster together and make a simple statement. This will make a nice addition to your daily adornments. You can wear also wear this necklace on other side!

Droplets are 1" by 1/2" and the chain length is 22" inches.
If you would like the chain shorter please let me know when ordering and I will adjust it.
A simple piece that will brighten your day.

Halve, birch bark cuff

Thu, 17 Dec 2009 12:56:18 -0500

$48.00
This cuff is very strong and distinctly birch bark with a branch marking and actual hole where the little branch grew. The texture of the raised lines and darker areas is just pure natural beauty. The bark does not wrap around the back of the wrist, instead I have used silver chain.

Measures 4" by 2.5". This cuff will fit all wrist sizes. Make sure and include your wrist measurement when ordering.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Offshoot, birch bark cuff

Wed, 16 Dec 2009 19:15:36 -0500

$52.00
This cuff has an amazing marking which makes it so unique and wonderful. It has a larger width which allows the full detail of the where the branch once grew to be seen and touched. The texture is bumpy without being to abrasive. Birch bark is lightweight and comfortable and can be worn with almost everything.

The inside measurement is 8" by 3.5" wide. Additional rings can be added to make this cuff fit a wider wrist. For a custom fit please included your wrist size when you purchase.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Inner Bark 06, birch bark cuff

Wed, 16 Dec 2009 16:21:00 -0500

$85.00
The bark that is used for this cuff is white birch bark and has been turned inside out. The bark has the inner layer between the wood and bark attached. The end result is an amazing crackled texture and an extra thickness. This type of cuff I am only able to make on rare occasions but will usually have a set that comes from one piece of bark.
This will sit comfortably on your wrist and is still very lightweight considering the size and thickness. The measurement from side to side is 3 1/2. I have worn this cuff and it wears great!

Inside measurement is 6 3/4" and it is 2 3/4" wide. This cuff can be sized up to 7 3/4" if needed. Please let me know when ordering if you need it sized up.

HOW TO FIND YOUR SIZE:
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasps have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Inner Bark 05, birch bark cuff

Tue, 15 Dec 2009 22:01:11 -0500

$85.00
The bark that is used for this cuff is white birch bark and has been turned inside out. The bark has the inner layer between the wood and bark attached. The end result is an amazing crackled texture and an extra thickness. This type of cuff I am only able to make on rare occasions but will usually have a set that comes from one piece of bark.
This will sit comfortably on your wrist and is still very lightweight considering the size and thickness. I have worn this cuff and it wears great!

Inside measurement is 7 1/2" and it is 2 1/2" wide. This cuff can be sized up to 8" if needed. Please let me know when ordering if you need it sized up.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Inner Bark 04, birch bark cuff

Tue, 15 Dec 2009 19:29:37 -0500

$85.00
The bark that is used for this cuff is white birch bark and has been turned inside out. The bark has the inner layer between the wood and bark attached. The end result is an amazing crackled texture and an extra thickness. This type of cuff I am only able to make on rare occasions but will usually have a set that comes from one piece of bark.
This will sit comfortably on your wrist but does have a 4" width across the front so there will be space between the bark and the sides of your wrist. I have worn this cuff and it wears great and is one of favorites!
Inside measurement is 7 1/4" and it is 2 1/2" wide. This cuff can be sized up to 7 3/4 if needed. Please let me know when ordering if you need it sized up.

HOW TO FIND YOUR SIZE:
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasps have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Inner Bark 03, birch bark cuff

Tue, 15 Dec 2009 13:26:30 -0500

$85.00
The bark that is used for this cuff is white birch bark.
The bark has been turned inside out. The bark has the inner layer between the wood and bark attached. The end result is an amazing crackled texture and an extra thickness. This type of cuff I am only able to make on rare occasions but will usually have a set that comes from one piece of bark.

Inside measurement is 7" and it is 2 1/" wide. This cuff can be sized up, up to a size 7.5.

HOW TO FIND YOUR SIZE:
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasps have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Woodpecker, birch bark cuff

Wed, 09 Dec 2009 18:56:43 -0500

$40.00
This cuff has two holes that were made from a Woodpecker. The holes do not compromise the strength but the do add a unique element. Birch bark is lightweight and comfortable and can be worn with almost everything.

The inside measurement is 7 1/2" by 1 3/4" wide. Additional rings can be added to make this cuff fit a wider wrist. For a custom fit please included your wrist size when you purchase.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Greenie, birch bark cuff

Wed, 09 Dec 2009 18:56:43 -0500

$35.00
The marks run on an angle on this cuff instead of straight across the bark. The green tones are randomly spread over the white bark and have a little of a metallic finish. Birch bark is lightweight and comfortable and can be worn everyday.

The inside measurement is 7" by 1 1/8" wide. Additional rings can be added to make this cuff fit a wider wrist. For a custom fit please included your wrist size when you purchase.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Lustrous, birch bark cuff

Wed, 09 Dec 2009 18:56:43 -0500

$38.00
This cuff is made from white birch and is polished to a metallic finish. It has the dark black marks that typify the birch tree but with a unique twist. Incredibly lightweight and comfortable and can be worn everyday.

The inside measurement is 7 1/2" by 2 1/4" wide. Additional rings can be added to make this cuff fit a wider wrist. For a custom fit please included your wrist size when you purchase.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Loops, white birch bark earrings

Wed, 09 Dec 2009 18:55:55 -0500

$30.00
Simple shape in broad bark pieces. Earrings can be worn on either side by turning the wire around. One side gives you a marking and the other is smooth and flat.

3 1/2" long, including wire and 1 1/2" wide.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

Little Leaves, birch bark earrings

Wed, 09 Dec 2009 18:55:55 -0500

$32.00
Earrings made from white birch bark. The top leaf has some light pinkish tones and the bottom leaf is the inside bark and is a reddish brown. They hang nicely and are lightweight.

The earrings measure 3 1/2" long including the hooks and are 3/4" at the widest part. The hooks and rings are black.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

Carve, birch bark earrings

Wed, 09 Dec 2009 18:55:55 -0500

$32.00
Carefully carved out center adds additional interest to these radish shaped earrings. Earrings look great worn either way because they are made to be reversible. Birch bark is very light weight.
2 1/2" wide and 2 1/2" long

Birch bark is durable but not indestructible. There is a protective clear coat applied to both sides of earrings.
The bark is naturally water resistant but long periods of exposure are not recommended. When my pieces are handled and stored with care and grace they will be long lasting.

Pure, birch bark earrings

Mon, 07 Dec 2009 16:46:19 -0500

$20.00
Very light weight and reversible these earrings can easily become your favorite everyday wear or a unique gift.

Length including hooks is 2 1/4" and width is 5/8".
Birch bark is durable but not indestructible. There is a protective clear coat applied to both sides of earrings.The bark is naturally water resistant but long periods of exposure are not recommended. When my pieces are handled and stored with care and grace they will be long lasting.

Spikes, birch bark earrings

Mon, 07 Dec 2009 16:14:06 -0500

$22.00
Very light weight and reversible these earrings can easily become your favorite everyday wear or a unique gift.

Length including hooks is 3 1/2" and width is 3/4".
Birch bark is durable but not indestructible. There is a protective clear coat applied to both sides of earrings.
The bark is naturally water resistant but long periods of exposure are not recommended. When my pieces are handled and stored with care and grace they will be long lasting.

Almost Diamonds, birch bark earrings

Mon, 07 Dec 2009 15:44:18 -0500

$20.00
Very light weight and reversible these earrings can easily become your favorite everyday wear or a unique gift.

Length including hooks is 1 1/2" and width is 3/4".
Birch bark is durable but not indestructible. There is a protective clear coat applied to both sides of earrings.
The bark is naturally water resistant but long periods of exposure are not recommended. When my pieces are handled and stored with care and grace they will be long lasting.

Trunk, birch bark earrings

Mon, 07 Dec 2009 15:31:47 -0500

$20.00
These earrings are nice slender pieces of sturdy birch bark. A simple statement that will look great with anything. They have ivory coloring on one side and a rich brown on the reverse side. Very light weight and reversible these earrings can easily become your favorite everyday wear or a great unique gift.

Length including hooks is 3 3/8" and width is 1/4".

Greening, birch bark cuff

Sun, 06 Dec 2009 12:19:24 -0500

$40.00
This birch bark cuff is nice and wide with a beautiful mixture of colors. A bit of green, ivory and sand tones blend to create a subtle palette. I have used gold finished metal pieces on this cuff which look great against the natural tones. Birch bark is lightweight and comfortable and can be worn with almost everything!

The inside measurement is 7" by 2.5" wide. Additional rings can be added to make this cuff fit a wider wrist. For a custom fit please included your wrist size when you purchase.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Front and Center, birch bark cuff

Sun, 06 Dec 2009 12:19:24 -0500

$40.00
Ivory colored bark with some darker shades of gray and sand throughout. It has a very nice marking that is front and center with two little holes from a Woodpecker or a bug. The holes do not compromise the strength of the bark at all. Birch bark is lightweight and comfortable and can be worn with almost everything.

The inside measurement is 6.5" by 2 1/8" wide. Additional rings can be added to make this cuff fit a wider wrist. For a custom fit please included your wrist size when you purchase.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Little Mushroom, birch bark necklace

Sun, 06 Dec 2009 12:19:24 -0500

$32.00
Leaf shaped birch bark with natural shelf mushroom growth. The bark and mushroom are preserved and sealed. Chains are a combination of bright silver and gunmetal gray. Necklace length is 28" and the leaf with mushroom is made to worn to the side.
A little piece of the natural world for you to wear and savor.
Thanks for looking!

Out of the Woods I, wall decor

Sun, 06 Dec 2009 12:19:23 -0500

$16.00
Out of the Woods I.
Very simple and chic home decor that can be hung in any room to add some of the outdoors. These look great in groupings because each piece of bark is different so you have a similiar design but with unique markings.

The bark is in a 4" by 6" frame sandwiched between wood and glass. Metal clips hold the layers together and also can be used to hang the piece on the wall. This can be hung vertical or horizontal.

Golden Girl, birch bark necklace

Sun, 06 Dec 2009 12:19:23 -0500

$32.00
Oval birch bark pendant hung on a swanky gold link chain. Three small glass beads adorn each curved link which adds the right amount of girlish charm. The chain is adjustable and at its shortest length is 13" and at its longest is 19".

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

Curl, birch bark cuff

Sun, 06 Dec 2009 12:19:23 -0500

$40.00
White birch bark with a beautiful natural curl gives remarkable detail to this cuff. There is also natural occuring green moss and lichen. Very lightweight and comfortable to wear. You will want to be concious of the curl detail when wearing to make sure that is doesn't snag.

Cuff diameter is 7.5" and will fit a wrist size of 6 to 7". I can add additional rings for this to fit a larger wrist. Just let me know when ordering what your wrist size is.

{"HOW TO"}
Here is how you can measure your wrist. Use a piece of paper to measure the area where you would like the cuff to sit. Then use a ruler to measure the piece of paper. Now add a 1/2 inch to the measurement. Depending on how you would like it to fit you can add up to an inch. The cuff will be to snug if you do not add the 1/2 inch.

Birch bark is durable but not indestructible. Birch bark is naturally water resistant but long periods of exposure are not recommended due to the special coating that is applied. When my pieces are handled and stored with care and grace they will be long lasting.

The magnetic clasp that I use have strong magnets. If you slide the magnets apart instead of pulling you will find it much easier to put on and take off. This will create less strain on the clasp and the cuff.

Pearly, white birch bark cuff