Etsy Shop for orgXIII

Glow-in-the-Dark Luminous no.10 Zipper by orgXIIIorg

Sat, 26 Dec 2009 18:38:25 -0500

$7.50
Our new batch of specialty zippers are in! Deck out your rave gear or add a unique (and useful) touch to your purse.

This listing is for one of our fully-separating, jacket-style large-sized zippers in glow in the dark (off-white which turns to glowing green in low light.)

__________________________________________

- This a fully-functioning complete zipper with durable #10 molded plastic luminous teeth on white nylon tape w/ a white metal slider pull.

- The style is fully-separating, completely opening zipper = appropriate for coats, jackets or anything with sides that need to be completely detached.

- The width of #10-gauge teeth (when zipped closed) is 3/8" wide (with each side of the tape being 1/2" wide.) Larger than normal zips you can easily find in stores, this is a comparable width to a #10 aluminum "biker jacket" zipper.

- The teeth length is 20" long (with some extra blank tape at the top end to easily place into your project.) Besides mid-length jackets, suggested uses for this length also include decorative details for a sleeve or pants leg + also perfect for zippered laptop pouches.

__________________________________________

(Looking for more than one? Just let us know, and we'll set up a reserved listing just for you.)

Legend of Zelda - Link's Kokiri style cap in green ( emerald/leaf ) - hats by orgXIIIorg

Sat, 26 Dec 2009 14:53:23 -0500

$25.00
This listing is for a Link style hat, in the colors shown = with the main color a medium-toned Emerald green and the contrast trim a lighter mid-tone Leaf green.
(The last photo shown here compares the Forest/Apple color scheme to the Emerald/Leaf version.)

__________________________________________

Our Link hats are in a size that fits most adults - with this *particular* hat measuring at about 22.5" inside brim diameter (with a bit of stretch if needed) and total length to the tip at about 26" (If you would like it a bit bigger or smaller, I'll make you a brand fresh custom one for you.)

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

__________________________________________

- Different color versions (including other various shades of green to match the look of any Nintendo era...as well as black, red and blue) are listed to Etsy as I complete them, and are ready to be shipped right away = http://www.etsy.com/shop/orgXIII?section_id=5735683
- Feel free to request a specific color scheme if you'd like, but please allow an extra 1-3 days for custom requests.
- Since I now I have several different greens to choose from, please consult the color guide here to double-check before making your hat selection =
http://www.flickr.com/photos/ensui/tags/greenfleece/

(By the way, you provide your own elf ears. My head model is just showing off what the hat looks like with long ears poking out.)

GIANT no.30 ZIPPER in YELLOW - fully-separating style - huge zips by orgXIIIorg

Sat, 26 Dec 2009 10:28:56 -0500

$11.00
After years of searching for over-sized zippers for our own costumes and projects, we had to eventually produce a large quantity of custom molded ones because they did not exist previously.

This listing is for one of our fully-separating jacket-style giant zippers, in the highly requested color of YELLOW.

__________________________________________

- This a real, fully-functioning zipper with durable heavy-duty #30 molded plastic teeth on matching yellow nylon tape w/ a soft vinyl slider pull + removable metal keyring.

- The style is fully separating, fully opening zipper, that is appropriate for coats, jackets or anything with sides that need to be completely detached.

- The width of #30-gauge teeth (when zipped closed) is 1" wide (with each side of the tape also being 1" wide.)

- The teeth length is 18" long (with some extra blank tape at the top end to easily place into your project) + is compatible with any of our other 18" separating #30's - in case you'd like to mix-&-match different colors.

...Note = this zipper will, by default, include a matching yellow slider...
...but for those that are creating a Taokaka cosplay from BlazBlue, I can substitute the yellow slider with a light orange slider instead to better match her costume design.

__________________________________________

(Looking for more than one? Just let us know, and we'll set up a reserved listing just for you.)

Kingdom Hearts Heartless Hat - original Shadow - hats by orgXIIIorg

Thu, 24 Dec 2009 07:41:26 -0500

$30.00
Inspired from the Heartless of the Kingdom Hearts series of games, these hats were patterned from scratch by Saeru, and are handcrafted individually. This style is our original design that features the short antenna like the smaller Shadows. Made from soft smooth lightweight and durable fleece, they will keep you warm in the winter and are also a fun thing to wear at conventions when not cosplaying. Unlike most other fleece hats, they also feature dimensional antenna that actually sit up thanks to lightweight interior foam cones. Also, since they are very sturdily sewn, they are machine washable (just take out the removable cones and turn inside out) but please line-dry to keep them looking new.

_______________________________________________

- This hat is complete and ready to ship right away. Just let us know if you have any custom requests...such as a different color...and we can make you a personalized one.
- If you would prefer this style Shadow hat WITHOUT the yellow eyes (for a more adjustable look) that listing is also here = http://www.etsy.com/shop/orgXIII?section_id=5735683

- Also, please specify when checking out what size you would like - either the default AVERAGE (standard adult = about 23-24" circumference), LARGE (for those with big heads or those that wish to wear it over a wig = about 25-26") or SMALL (for kids or people who just have small heads like me = about 21-22".) They are meant to sit a bit diagonally, and cover the back of your head, but can also be worn horizontally across the forehead/crown like a normal beanie. The hats do stretch fairly well around the head, too, plus the inside foam cones can be cut down if needed to best fit the curvature of your head.

All international orders other than Canada or Mexico will be sent via International Priority Mail unless otherwise requested and arranged for...we -can- send by economy airmail if you prefer, but please send us a note first. Thanks. ^_^

Legend of Zelda - Link's Kokiri style cap in green ( apple/emerald ) - hats by orgXIIIorg

Wed, 23 Dec 2009 22:13:16 -0500

$25.00
This listing is for a Link style hat, in the colors shown = with the main color a bright saturated (but not neon) warm apple green with the contrast a medium-toned emerald green.

__________________________________________

Our Link hats are in a size that fits most adults - with this *particular* hat measuring at about 23" inside brim diameter (with a bit of stretch if needed) and total length to the tip at about 26" (If you would like it a bit bigger or smaller, I'll make you a brand fresh custom one for you.)

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

__________________________________________

- Different color versions (including other various shades of green to match the look of any Nintendo era...as well as black, red and blue) are listed to Etsy as I complete them, and are ready to be shipped right away = http://www.etsy.com/shop/orgXIII?section_id=5735683
- Feel free to request a specific color scheme if you'd like, but please allow an extra 1-3 days for custom requests.
- Since I now I have several different greens to choose from, please consult the color guide here to double-check before making your hat selection =
http://www.flickr.com/photos/ensui/tags/greenfleece/

(By the way, you provide your own elf ears. My head model is just showing off what the hat looks like with long ears poking out.)

Legend of Zelda - Link's Kokiri style cap in green ( leaf/lima ) - hats by orgXIIIorg

Tue, 22 Dec 2009 16:54:47 -0500

$25.00
This listing is for a Link style hat, in the colors shown = with the main color a mid-tone Leaf green with the contrast a brighter saturated Lima green.

__________________________________________

Our Link hats are in a size that fits most adults - with this *particular* hat measuring at about 23.5" inside brim diameter (with a bit of stretch if needed) and total length to the tip at about 26" (If you would like it a bit bigger or smaller, I'll make you a brand fresh custom one for you.)

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

__________________________________________

- Different color versions (including other various shades of green to match the look of any Nintendo era...as well as black, red and blue) are listed to Etsy as I complete them, and are ready to be shipped right away = http://www.etsy.com/shop/orgXIII?section_id=5735683
- Feel free to request a specific color scheme if you'd like, but please allow an extra 1-3 days for custom requests.
- Since I now I have several different greens to choose from, please consult the color guide here to double-check before making your hat selection =
http://www.flickr.com/photos/ensui/tags/greenfleece/

(By the way, you provide your own elf ears. My head model is just showing off what the hat looks like with long ears poking out.)

Legend of Zelda - Link's Kokiri style cap in green ( forest/apple ) - hats by orgXIIIorg

Tue, 15 Dec 2009 23:38:03 -0500

$25.00
This listing is for a Link style hat, in the colors shown = with the main color a dark forest green with the contrast a bright saturated (but not neon) warm apple green.

__________________________________________

This hat fits most adults with the inside diameter at about 23.5" (with a bit of stretch if needed) and total length to the tip is about 26"

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

__________________________________________

- Different color versions (including other various shades of green to match the look of any Nintendo era...as well as black, red and blue) are listed to Etsy as I complete them, and are ready to be shipped right away = http://www.etsy.com/shop/orgXIII?section_id=5735683
- Feel free to request a specific color scheme if you'd like, but please allow an extra 1-3 days for custom requests.
- Since I now I have several different greens to choose from, please consult the color guide here to double-check before making your hat selection =
http://www.flickr.com/photos/ensui/tags/greenfleece/

Legend of Zelda - DARK Link Cap ( black/steel ) - hats by orgXIIIorg

Mon, 14 Dec 2009 17:56:13 -0500

$25.00
This listing is for a "Dark" Link style hat, in the colors shown = with the main color a solid black with the contrast a dark blue-steel-grey.

__________________________________________

Our Link hats are in a size that fits most adults - with this *particular* hat measuring at about 23.5" inside brim diameter (with a bit of stretch if needed) and total length to the tip at about 26" (If you would like it a bit bigger or smaller, I'll make you a brand fresh custom one for you.)

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

__________________________________________

- Different color versions (including other various shades of green to match the look of any Nintendo era...as well as black, red and blue) are listed to Etsy as I complete them, and are ready to be shipped right away = http://www.etsy.com/shop/orgXIII?section_id=5735683
- Feel free to request a specific color scheme if you'd like, but please allow an extra 1-3 days for custom requests.
- Since I now I have several different greens to choose from, please consult the color guide here to double-check before making your hat selection =
http://www.flickr.com/photos/ensui/tags/greenfleece/

(By the way, you provide your own elf ears. My head model is just showing off what the hat looks like with long ears poking out.)

Legend of Zelda - Link's cap in BLUE ( dark/light ) - hats by orgXIIIorg

Sun, 13 Dec 2009 06:28:05 -0500

$25.00
This listing is for a Link style hat, in the colors shown = with the main color a dark blue with the contrast a lighter blue.

This hat fits most adults with the inside diameter at about 23" (with a bit of stretch if needed) and total length to the tip is about 26"

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

Different color versions (including other various shades of green to match the look of any Nintendo era, as well as other colors) are listed to Etsy as I complete them, and are ready to be shipped right away. Please feel free to send a conversation message if you're looking for a specific color scheme.

(By the way, you provide your own elf ears. My head model is just showing off what the hat looks like with long ears poking out.)

BEMANI DDR ARROWS x4 Pin-back Mini Button Pin Badges

Fri, 11 Dec 2009 16:41:59 -0500

$4.00
This set of four mini pins are hand-pressed and each measure 1" in diameter, featuring various colors of the arrows seen in the Dance Dance Revolution game.

(Please just let me know if you would like a set of another quantity or multiples of a single color.)

GIANT ZIPPER oversized 30gauge fully-separating teeth - zips by orgXIIIorg

Tue, 08 Dec 2009 21:54:11 -0500

$12.00
After years of searching for over-sized zippers for our own costumes and projects, we had to eventually produce a large quantity of custom molded ones because they did not exist previously.

This listing is for one of our giant zips, in your color choice of either RED, PURPLE, BLUE, or GREEN...or pick a different color for each side for a dual-toned look.

__________________________________________

- This a real, fully-functioning zipper with durable heavy-duty #30 molded plastic teeth on black nylon tape w/ a slider pull + removable keyring.

- The style is fully separating, fully opening zipper, that is appropriate for coats, jackets or anything with sides that need to be completely detached.

- The teeth length is 18" long (with some extra blank tape at the top end to easily place into your project.)

- The width of #30-gauge teeth (when zipped closed) is 1" wide (with each side of the tape also being 1" wide.)

__________________________________________

Great for incorporating into cosplay costuming use...or for a unique accent in luggage, backpacks or purses...or for an unusual detail in various home decorating or industrial designs...or...?

Legend of Zelda - Link's Kokiri style cap in green ( sage/forest )

Sun, 06 Dec 2009 13:51:43 -0500

$25.00
This listing is for a Link style hat, in the colors shown = with the main color a mid-tone Leaf green with the contrast a brighter saturated Lima green.

__________________________________________

Our Link hats are in a size that fits most adults - with this *particular* hat measuring at about 23" inside brim diameter (with a bit of stretch if needed) and total length to the tip at about 26" (If you would like it a bit bigger or smaller, I'll make you a brand fresh custom one for you.)

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

__________________________________________

- Different color versions (including other various shades of green to match the look of any Nintendo era...as well as black, red and blue) are listed to Etsy as I complete them, and are ready to be shipped right away = http://www.etsy.com/shop/orgXIII?section_id=5735683
- Feel free to request a specific color scheme if you'd like, but please allow an extra 1-3 days for custom requests.
- Since I now I have several different greens to choose from, please consult the color guide here to double-check before making your hat selection =
http://www.flickr.com/photos/ensui/tags/greenfleece/

(By the way, you provide your own elf ears. My head model is just showing off what the hat looks like with long ears poking out.)

GIANT no.30 ZIPPER in WHITE - fully-separating style - huge zips by orgXIIIorg

Thu, 12 Nov 2009 23:03:07 -0500

$11.00
After years of searching for over-sized zippers for our own costumes and projects, we had to eventually produce a large quantity of custom molded ones because they did not exist previously.

This listing is for one of our giant zips, in the return of the color WHITE (finally!) in the new jacket-separating style, brought to you by request.

- This a real, fully-functioning zipper with #30 molded plastic teeth on white nylon tape w/ a soft vinyl slider pull + removable metal keyring.
- The style is fully separating, 2-way opening zipper, that is appropriate for coats, jackets or anything with sides that need to be completely detached.
- The teeth length is 18" long (with some extra blank tape at the top end to easily place into your project.)
- The width of #30-gauge teeth (when zipped closed) is 1" wide (with each side of the tape also being 1" wide.)

This zipper would be great for making cosplays including Sora's jacket from Kingdom Hearts II, Yoko's boots from Gurren Lagann, or D.gray-man uniforms.
...Or would look great in a backpack or purse, just for fun.
What will you make out of it...? ^_-

(Looking for more than one? Just let us know, and we'll set up a reserved listing just for you.)

Kingdom Hearts Heartless Hat - (Blind) Shadow - hats by orgXIIIorg

Sun, 25 Oct 2009 15:13:33 -0400

$27.00
Inspired from the Heartless of the Kingdom Hearts series of games, these hats were patterned from scratch and handcrafted individually by us. This hat includes the short antenna like the smaller Shadows in our new "revised" style based on our original design...which now features an "eye-less" brim, as per requests. (The brim is still just as plush, with a double thickness of black fleece instead of the yellow interior layer that the original hat design has. Also, due to lack of the eyes, the length of the brim can be easily adjusted on this hat to either cover your ears or sit higher, as you prefer.)

Made from soft smooth lightweight and durable fleece, they will keep you warm in the winter and are also a fun thing to wear at conventions when not cosplaying. Unlike most other fleece hats, they also feature dimensional antenna that actually sit up thanks to lightweight interior foam cones. Also, since they are very sturdily sewn, they are machine washable (just take out the removable cones and turn inside out) but please line-dry to keep them looking new.

___

This hat is complete and ready to ship right away. Just let us know if you have any custom requests...such as a different color...and we can make you a personalized one.

Also, please specify when checking out what SIZE you would like. Right now, I have this hat ready to go in :
- AVERAGE (standard adult = about 23-24" unstretched)
-and-
- SMALL (for kids or people who just have small heads like me = about 21-22" unstretched)
- I can also create these in LARGE (for those with big heads or those that wish to wear it over a wig.)
- Note that the hats do stretch somewhat around the head, and the inside foam cones can be cut down if needed to best fit the curvature of your head. (My head is 22" around the forehead and I can comfortably fit in hats measuring between 21" and 25" - so the sizing is just a starting point to determine how snug it will feel.)

All international orders other than Canada or Mexico will be sent via International Priority Mail unless otherwise requested and arranged for...

Legend of Zelda - Link's cap in RED ( light/dark ) - hats by orgXIIIorg

Fri, 09 Oct 2009 13:00:44 -0400

$25.00
Link style hat...now in red!

__________________________________________

Our Link hats are in a size that fits most adults - with this *particular* hat measuring at about 23" inside brim diameter (with a bit of stretch if needed) and total length to the tip at about 26"

Made of soft, lightweight and durable fleece, you can tote this cap around wherever you go to equip when needed. Plus, like our other hats, these caps are machine-washable (just turn inside out and wash in cool water, then allow to air dry to keep them looking new.)

__________________________________________

Different color versions (including other various shades of green to match the look of any Nintendo era...as well as red and blue) are listed to Etsy as I complete them, and are ready to be shipped right away.
Feel free to request a specific color scheme if you'd like, but please allow an extra 1-3 days for custom requests.

(By the way, you provide your own elf ears. My head model is just showing off what the hat looks like with long ears poking out.)