Etsy Shop for lazydayz

Sterling Hammered Hearts

Fri, 11 Dec 2009 02:34:43 -0500

$12.00
These 1/2" to 5/8 inch Argentium sterling silver hearts cut from sheet, hammered for texture and hang from hand made 20 gauge Argentium sterling silver ear wires.

Organic Flow Ring - size 6

Fri, 11 Dec 2009 01:53:51 -0500

$20.00
BOGO sale- see shop announcement for details

This ring was form by fusing 8 gauge Argentium sterling silver wire, then continuing to torch it carefully to melt into this organic shape, without balling or splitting the ring. It was then shaped around a mandrel to a US size 6 and finished with hammer, files, and rotary tools. The ring has been heat hardened to activate Argentium's tarnish resistance element and tumbled.

I will not be making these rings to size, however, I plan on making more, that end up different sizes. The form desired comes first, the size that results will be the size of the ring, if that makes any sense what so ever :)

Sticks and Stones Pendant

Fri, 11 Dec 2009 01:53:51 -0500

$35.00
BOGO sale- see shop announcement for details

Like a pile of sticks and stones in the forest, but with a lovely shine.

Formed by fusing multiple sizes of wires and granulated Argentium sterling silver, brushing the outside for a matte finish, and hangs from a fused closed Argentium ss jump ring threaded through an existing hole.

The form measures about 1 3/8 inch long and 1 inch wide at widest point and is quite thick as can be see by the side view picture.

Bauble Hoops

Fri, 11 Dec 2009 01:27:03 -0500

$30.00
BOGO sale- see shop announcement for details

These hoops were made from 19 gauge Argentium sterling silver, hammered flat. Hanging on the hoops are many alternating handmade 19 gauge circles and ball heads. The entire piece was heat hardened to activate Argentiums tarnish resistance element and tumbled hard and shiny.

The hoops measure almost 1 1/4 inches diameter.

Circling Round Necklace

Fri, 11 Dec 2009 01:27:03 -0500

$55.00
BOGO sale- see shop announcement for details

All of the large round links ( 5/8 to 3/4 inch diameter) of this necklace were made from 18 gauge Argentium sterling silver wire, fused closed, then hammered flat. The smaller links are made from slimmer 20 gauge Argentium sterling silver wire, also fused closed but left smooth. The total length including the hook is just over 18 inches.

The necklace was heat hardened to activate the tarnish resistance element in Argentium sterling silver, then tumbled hard and shiny.

Shown in the second picture on my not so young, not so slim neck :)

Sterling Bark textured Cuff - size Large

Fri, 11 Dec 2009 01:19:12 -0500

$32.00
BOGO sale- see shop announcement for details

This oval cuff is made from a piece of thick 8 gauge Argentium sterling silver wire that has been hammered flat, then repeatedly on the outside with an edge of a flat headed chasing hammer, resulting in the bark like appearance. The bracelet was heat treated to activate Argentium's tarnish resistance element and then tumbled hard and shiny.

This is a size large, with the length of silver being 7 inches, it should fit a 7.5 inch wrist nicely, with some flexibility in either direction.

Available in other sizes in the store or to order.

Hammered Sterling Hoops - medium

Fri, 11 Dec 2009 01:08:39 -0500

$10.00
BOGO sale- see shop announcement for details

These hoops were made from 19 gauge Argentium sterling silver wire, hammered from the side and flatter (wider) especially on the bottom edge. The hoop measures about 1 1/4 inches diameter.

They have been heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Kooky Karin Necklace

Fri, 11 Dec 2009 01:05:44 -0500

$100.00
BOGO sale- see shop announcement for details

Karin being my sister-in-law , a loving tribute :)

This necklace was made from literally hand-forming instinctively pieces of 16 gauge Argentium sterling silver wire, that I had balled, hammered and drilled one end for a link.
The chain portion was made from 19 gauge Argentium sterling silver wire. All pieces were individually hand hammered.

The total length is about 23.5 inches.

It has been heat treated to activate Argentium's tarnish resistance element, and tumbled hard.

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Squared Wire Circles Bracelet

Fri, 11 Dec 2009 00:43:01 -0500

$40.00
BOGO sale- see shop announcement for details

This bracelet was made from 16 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered) with the smallest about 3/8 inch diameter and the largest just over 3/4 inch diameter.

Each circle was individually hammered lightly with the flat side of a hammer on the flat side and on the outer side to make it appear like square wire.

The total length of the bracelet is 9 1/4 inch including hook and should easily fit most wrists. You can hook into any circle, so even the smallest wrists can were this... the remaining links can be left dangling or cut off with wire cutters. If you would like me to remove a length of links before shipping please just tell me how much in inches you want removed, or what total length you are looking for.

Turquoise drops

Fri, 11 Dec 2009 00:43:01 -0500

$18.00
BOGO sale- see shop announcement for details

The circles are handmade jump rings of 19 gauge hardened Argentium sterling silver that clasps the turquoise stone beads. The simple form hangs from longer than usual 19 gauge handmade Argentium sterling silver ear wires. The circle diameter is between 5/8th and 3/4 of an inch and the total length from the top of the ear wire to the base is about 2 inches.

Hammered Sterling Hoops - 2 inch

Fri, 11 Dec 2009 00:43:01 -0500

$12.00
BOGO sale- see shop announcement for details

The price is for a pair of hoops - Qty 1=1 pair

These hoops were made from 19 gauge Argentium sterling silver wire, hammered from the outer edge rather than from the side for added dimension from the front. The hoop diameter measures about 2 inches.

They have been heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

Full Moon Dangles

Fri, 11 Dec 2009 00:09:36 -0500

$15.00
BOGO sale- see shop announcement for details

Reminiscent of aged coins or full moons, you choose :)

These are simple and lightweight, with the hand cut Argentium Sterling Silver disks measuring approximately 5/8" diameter. The disks were hammered against slate repeatedly for texture, then tumbled several times for shine. They hang from handmade 19 gauge Sterling Silver ear wires, also tumbled hard.

The disks have been heat hardened to activate the tarnish resistance element in Argentium.

Rough and Tumble Cuff - med size unisex

Fri, 11 Dec 2009 00:09:36 -0500

$85.00
BOGO sale- see shop announcement for details

This Bracelet is made from 14 gauge Argentium sterling silver sheet, It was cut with a jewelers saw, hammered repeatedly with a marked up brass hammer until I obtained a complete pattern while preserving the inside finish, then the edges were filed smooth and I applied a brush finish to the inside.

It was heat hardened to activate Argentium's tarnish resistance element, then tumbled to a nice shine.

It measures 6 inches long and just shy of 1 inch high (about 15/16th of an inch). Shown in the picture on my 6 1/2 - 7 inch wrist and it fits comfortably.

If you would like a different size or one that is darkened, please convo me, although each will have variations, the process will be the same. (prices may vary)

Triple Diamond Dangles

Fri, 11 Dec 2009 00:09:36 -0500

$26.00
BOGO sale- see shop announcement for details

The Diamonds (squares) are made from 16 gauge Argentium sterling silver, fused round, then shaped square and hammered with the flat side of a peening hammer on both sides for texture. They hang from 19 gauge handmade Argentium sterling silver ear wires. The earrings were heat hardened to activate Argentiums' tarnish resistance element, and tumbled shiny.

The total length from top of ear wire to base is about 2 1/2 inches, and the diagonal of the largest square is a little over 3/4 inches.

Twisted Sterling Ring

Thu, 10 Dec 2009 23:53:34 -0500

$12.00
BOGO sale- see shop announcement for details

These ring was formed by flattening 12 gauge Argentium sterling silver wire, then hand twisted, cut, filed and fused together. The ring was then polished down on the inside for a smooth feel against the skin, and heat hardened to activate argentium's tarnish resistance element.

US ring sizes available....... 5, 6, 6 1/2, 7 3/4, and 8 3/4

Please specify size under note to seller

Rough and Tumble Ring - Unisex

Thu, 10 Dec 2009 23:53:34 -0500

$18.00
BOGO sale- see shop announcement for details

The price listed is for one ring

This ring is made from 8 gauge Argentium sterling silver wire, after hammering repeatedly with a marked up brass hammer, while preserving the inside finish, it is about 12 to 13 gauge thick, so it is solid. While the outside of the ring has the beaten appearance, the inner side (next to the skin) is smooth as silk.

The ring has been heat treated to activate Argentium's tarnish resistance element, and tumbled hard and shiny.

Have in stock sizes 5, 7, 11, but will happily make it in another size.
and is about 4 mm wide.

If you would like a different size, just list that in note to seller. It may take a day to 2 more than my usual turnaround, and remember, each piece is made individually, while the process will be the same, the marking will inevitably vary some.

Rough and Tumble Post Hoops

Thu, 10 Dec 2009 23:43:40 -0500

$23.00
BOGO sale- see shop announcement for details

These earrings are made from 12 gauge Argentium sterling silver wire, shaped and hammered repeatedly with a marked up brass hammer to create the finish. Then I fused 19 gauge ear posts to them (no solder). The width of the band, from the front is about 1/8th inch; the diameter of the hoops are about 1 1/4 inches.

They have been heat treated to activate Argentium's tarnish resistance element, and tumbled hard and shiny. Also included are purchased medium sterling silver post nuts.

Sterling Loop in Loop Bracelet

Thu, 10 Dec 2009 23:38:42 -0500

$45.00
BOGO sale- see shop announcement for details

This bracelet was made from sturdy 18 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered), then shaped and woven together to create this classic yet sturdy bracelet.

The total length of the bracelet is 8.5 inches not including the hook and should fit a 7 to 7.5 inch wrist the best. In the photo on my wrist, I demonstrate that it is too long for me. I have a 6 1/2 - 6 3/4 inch wrist, and would need a shorter bracelet to fit comfortable on me.

I also have one slightly shorter, 8 inches in length without the hook. It should fit a 6.5 to 7 inch wrist. This bracelet fits my wrist with drape, but without rolling off my hand.

I would happily make one to size as each link takes about 1/4". Simply let me know what length you would like (excluding hook) or tell me the wrist measurement of the intended recipient, under note to seller when purchasing.

Sterling Stepping Stone Dangles

Thu, 10 Dec 2009 23:22:37 -0500

$30.00
BOGO sale- see shop announcement for details

The "stepping stones" were made from fused balls of Argentium sterling silver, hammered over and over on cement with a brass mallet, creating their own combination of unique grains and markings from the hammer. I lightly filed and sanded all the surfaces, but the shapes created were left untouched. The "stones" hang from longer than usual handmade 20 gauge Argentium sterling silver ear wires.

Total length is about 2 1/2 inches long including ear wires. The earrings were heat treated to activate Argentium's tarnish resistance element, and tumbled hard and shiny.

Multifaceted Sterling Ring - medium thick

Thu, 10 Dec 2009 23:03:25 -0500

$10.00
BOGO sale- see shop announcement for details

The price is for one ring - US sizes 4 to 10

These rings are formed by fusing 12 gauge Argentium sterling silver wire, hand hammering, polishing the inside for a smooth feel against the skin, and finally tumble hardened. These rings are heat treated to activate the tarnish resistance of argentium silver.

please specify size under note to seller

also, if you would like more than the quantity available please let me know how many and I can update quantity, as I usually have several sizes of rings already fused ready to be textured or finished for another style ring.

seen in bottom picture other 12 gauge stackers - from left to right
hammered stacker http://www.etsy.com/view_listing.php?listing_id=25971618
chipped stacker http://www.etsy.com/view_listing.php?listing_id=26640131
brush-finish stacker http://www.etsy.com/edit_listing1.php?listing_id=26218935
multifaceted stacker http://www.etsy.com/view_listing.php?listing_id=25715663

Chipped Stacker - medium thick

Thu, 10 Dec 2009 22:30:13 -0500

$12.00
BOGO sale- see shop announcement for details

The price is for one ring - US sizes 4 to 10

This ring was formed by fusing 12 gauge Argentium sterling silver wire,nicking the edge with a diamond cut tool, then finally tumbling for contrast. These have also been heat treated to activate to tarnish resistance in Argentium Silver.

please specify size under note to seller

also, if you would like more than quantity available, please let me know how many and I can add to quantity available, as I usually have several sizes of rings already fused ready to be textured or finished for another style ring.

seen in bottom picture other 12 gauge stackers - from left to right
hammered stacker http://www.etsy.com/view_listing.php?listing_id=25971618
chipped stacker http://www.etsy.com/view_listing.php?listing_id=26640131
brush-finish stacker http://www.etsy.com/edit_listing1.php?listing_id=26218935
multifaceted stacker http://www.etsy.com/view_listing.php?listing_id=25715663

Dimpled Sterling Cuff Bracelet - size medium

Thu, 10 Dec 2009 22:20:00 -0500

$30.00
BOGO sale- see shop announcement for details

This oval cuff, made from a 6 inch long piece of thick 8 gauge Argentium sterling silver wire, has been hammered hard repetitively with the round side of a peening hammer, the inside edge (against the skin) has been finished smooth and shiny. The bracelet was heat hardened to activate Argentium's tarnish resistance element, then tumbled.

This size is good for 6.5 inch wrist give or take a little.

Available in other sizes in the store or to order.

Organic Flow Ring - size 12

Thu, 10 Dec 2009 21:55:12 -0500

$28.00
BOGO sale- see shop announcement for details

This ring was form by fusing 8 gauge Argentium sterling silver wire, then continuing to torch it carefully to melt into this organic shape, without balling or splitting the ring. It was then shaped around a mandrel to a US size 12 and finished with hammer, files, and rotary tools. The ring has been heat hardened to activate Argentium's tarnish resistance element and tumbled. It has a matte brush finish.

I will not be making these rings to size, however, I plan on making more, that end up different sizes. The form desired comes first, the size that results will be the size of the ring, if that makes any sense what so ever :)

Sterling Skipping Stones Necklace

Thu, 10 Dec 2009 14:44:11 -0500

$145.00
BOGO sale- see shop announcement for details

The "skipping stones" were made from fused balls of Argentium sterling silver, hammered over and over on cement with a brass mallet, creating their own combination of unique grains and markings from the hammer. I lightly filed and sanded all the surfaces, but the shapes created were left untouched. The drill holes were intentionally drilled a little off-center. The "stones" are connected with solid 18 gauge fused Argentium sterling silver wire ovals, that continue on to the handmade hook on the back.

Total length is 17 inches, including the hook, however, by hooking it on another link, you could shorter it to choker length. the largest shape, which hangs from the center is about an inch and a half diameter, and the entire piece weighs over 2 troy ounces.

The entire piece was heat treated to activate Argentium's tarnish resistance element, and tumbled hard and shiny. Total weight is over a troy ounce.

Oh, I was going to name this stepping stones like similar items in my shop, until I realized there were 12 stones, and thought 12 stepping stones, no, just too cliche, lol

Sparkling Star Dangles

Thu, 10 Dec 2009 13:51:20 -0500

$10.00
BOGO sale- see shop announcement for details

Great for the Holidays, but also year round!

The stars, made of 19 gauge Argentium sterling silver measure approximately 5/8” in diameter at the widest point. They were hammered with the round side of a peening hammer for the sparkle texture, and were fused not soldered. They hang on 19 gauge handmade sterling silver ear wires. They were heat hardened to activate argentium's tarnish resistance element, then tumbled shiny.

The earrings measure about 1 1/4 inches from top of ear wire to base.

Twirl Curl Earrings

Thu, 10 Dec 2009 13:28:00 -0500

$14.00
BOGO sale- see shop announcement for details

The curls are made from 16 gauge Argentium sterling silver, hammered on a tapered Mandrel for increasing width at the bottom. They hang from 19 gauge handmade argentium sterling silver ear wires.

They have been heat hardened to activate Argentium's tarnish resistance element, then tumbled shiny.

Diameter of the widest point is about 1/2 inch, and length from top of ear wire to base is
2 1/2 inches.

5 set Dainty stacker Rings

Thu, 10 Dec 2009 11:53:54 -0500

$30.00
BOGO sale- see shop announcement for details

The price is for all 5 in one size

All rings are made from 16 gauge Argentium sterling silver, fused closed (not soldered).

Shiny Round Wire
Matte Brushhed Wire
Hammered Wire
Hammered/Tarnished Wire
Striped (Hammered-marked with lines, tarnished, then brushed so that the oxidization remains in the lines)

Please specify what U.S. size you desire under note to seller when ordering (Available in US sizes up to 10).

Support the Florida Etsy Street Team, visit www.etsyFEST.com

3 Dainty Sterling Stackers

Thu, 10 Dec 2009 11:48:23 -0500

$20.00
BOGO sale- see shop announcement for details

The price is for three rings.

All rings are made from 16 gauge Argentium sterling silver, fused closed (not soldered).

Shiny Round Wire
Matte Brushhed Wire
Hammered Wire
Hammered/Tarnished Wire
Striped (Hammered-marked with lines, tarnished, then brushed so that the oxidization remains in the lines)

Please specify which 3 designs and what U.S. size(s) you desire under note to seller when ordering (Available in US sizes up to 10).

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Sterling Ribbon Curls

Thu, 10 Dec 2009 03:21:08 -0500

$20.00
BOGO sale- see shop announcement for details

Don't they remind you of the curled on a birthday gift? How festive!

Solid sterling silver shaped into spirals hanging from 20 gauge ss french ear hooks. The inner side is polished to a smooth shine, the outer side is textured. Made from 18 gauge sterling silver sheet metal and approx 1/2" wide and approx 3 1/2" long from top of ear loop to base.

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Sterling Waterfalls

Thu, 10 Dec 2009 03:21:08 -0500

$48.00
BOGO sale- see shop announcement for details

These glimmering earrings were made with hammered pieces of 14 guage Argentium sterling silver wire, handmade ear wires and jump rings also of Argentium sterling silver wire.

Each Earring has 15 individually dangling hammered wire, 5 per tier. Total length is over 2.5 inches long, with each dangle around 3/4 inch long.

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Lucky Stars Necklace

Thu, 10 Dec 2009 01:17:40 -0500

$65.00
BOGO sale- see shop announcement for details

Each of the 21 stars, made from 19 gauge Argentium sterling silver, was shaped individually with pliers, fused, hammered flat, any shape edges filed smooth. The additional chain and hook were also made from 19 gauge Argentium sterling silver, fused closed and hammered flat.

The length is adjustable. In the photo, I hooked it so that is is about 21 inches, but can be made 2 inches longer by hooking in the last link.

The entire piece was heat hardened to activate Argentium's tarnish resistance element, then tumbled shiny.

Church Windows

Wed, 09 Dec 2009 22:12:35 -0500

$22.00
BOGO sale- see shop announcement for details

The shape and markings on these solid Argentium sterling silver earrings remind me of tall stained glass church windows of yore (yore? sure, why not)

The forms were cut from 20 gauge Argentium sterling silver sheet, hammered with a couple of different shaped chasing tools, fused to the small argentium jump ring and filed.

The entire earrings were heat hardened to activate Argentium's tarnish resistance element, then tumbled shiny.

They measure about 2 1/4 inches from top of ear wire to base and are a little over 1/4 inch wide.

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Circles Circles Circles

Wed, 09 Dec 2009 20:05:38 -0500

$40.00
BOGO sale- see shop announcement for details

This bracelet was made from 16 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered) with the smallest about 3/8 inch diameter and the largest 5/8 inch diameter. The bracelet has been tumble hardened.

The total length of the bracelet is 8 3/4 inch excluding hook and should easily fit most wrists. You can hook into any circle, so even the smallest wrists can were this... the remaining links can be left dangling or cut off with wire cutters. If you would like me to remove a length of links before shipping please just tell me how much in inches you want removed.

Squared Sterling Oval Cuff - Medium-Small Size

Wed, 09 Dec 2009 18:50:03 -0500

$29.00
BOGO sale- see shop announcement for details

This oval cuff is made from a 5.5 inch long piece of thick 8 gauge Argentium sterling silver wire that has been hammered into square wire, resulting in approximately 3mm square wire. It was hammered repeatedly with the flat side of a hammer to create the faceted texture. The bracelet was heat treated to activate Argentium's tarnish resistance element and then tumbled hard and shiny.

This size is good for 6 inch wrist give or take a little.

Available in other sizes in the store or to order.

Breast Cancer Boob Bomb - -portion to breast cancer charity

Wed, 09 Dec 2009 14:49:52 -0500

$20.00
20% of sales, not profit, of this item will go to breast cancer non profit organizations.

The price is for one. For a pair of earrings with opposing wicks, please see listing http://www.etsy.com/view_listing.php?listing_id=24850926

If you would like more than are in stock, simply contact me, I will be making these on a continual basis.

Story about the design of the "symbol" at the bottom.

Technical : diameter of 20 gauge Argentium sterling silver bomb is 5/8 inch, length from top of wick to base about 1 1/4 inches. Made entirely by hand, no precut disks or wicks The wicks were shaped in the ribbon shape, made of flattened, twisted 12 gauge Argentium sterling silver, so not only is it more tarnish resistant than the normal sterling silver, it was entirely fused together, no solder used. As long as I am making these by hand, I will initial the back of each piece. The earrings were tumbled hard after completion.

The hook allows for multipurpose - hang as a pendant or charm, include it on the pin of your pink ribbon, etc. Also the hook is removable in case you chose to hang the bomb from the wick rather than the hook.

IF YOU ARE NOT CURRENTLY REGISTERED FOR ETSY, please do so to purchase, it only takes a moment, and I intend on only selling this piece through ETSY, because where else would I have have had the opportunity for exposure to the world, for a nominal fee. When you register - please list LAZYDAYZ as the shop that referred you :)

Also, I request that no one else produce this new symbol of breast cancer, copyright 2009. More because if it hits, I want a larger portion of proceeds to be able to go toward finding a CURE.

--------------------------------------------------------------------

Story behind the creation of the boob bomb:

I finally completed this design that I have been thinking of since I was first diagnosed with advanced stage breast cancer. Not that I don't like what the pink ribbon campaign has done for awareness, my one and only tattoo is a pink ribbon, but many of us who have breast cancer feel it is too cute. No, there is not a cure, and yes it still kills about 40,000 a year, with a recently televised estimate that the 1 in 8 women it effects now will only increase in the future.

I have been thinking about the boob bomb for a long time. Well I am not a writer, I am a doer, so it takes me longer to get to the point sometimes, but the process is just as fulfilling as the completion. But no, I am not actually finished. For me, I know breast cancer for me and many with this disease, stirs the emotions, and in me the need to try to create. Yes most of my work is somewhat generic, that is because I am also trying to make a few bucks, and generic sells. Cancer not only effects your physically and emotionally, but financially as well.

My Arms are still strong, but my hands kink up on me, so no I do not design intricate delicate pieces, but I still put my emotions into my work. As I noted on my shop profile, hammering can be quite therapeutic, getting out anxiety or anger in a productive way, filing metal is like music to me, the repetition, the back and forth like that of a violin. The cutting and soldering make my calm, I breathe deeply before I begin, otherwise the task could not be completed.

back to the concept and design of the boob bomb. My initial attempts were more "realistic" and I just felt something was wrong with it, along with some of the technical aspects bothering me, so I kept at it, not continuously but on and off. The multipurpose element was the most difficult, yet had the easiest solution, the simple hook, making it a versatile piece to be used as a pendant for a necklace, bracelet, attached to a key ring, included in the pin over a pink ribbon or hung from ear wires or even clip ons, etc, since many of my audience has been hit financially by this disease, I wanted them to be able to afford it and have multiple uses of one or two pieces.

Next realism was not as important and actually a problem. For those who are somewhat conservative, or are uncomfortable discussing their own journey with breast cancer, if you just saw the piece on a charm bracelet, you would not necessarily know that it represented a breast, without the title attached - my almost-80-year-old mom (yah mom ) wears one, however, for the person wearing it, it would. The piece can also open dialog about breast cancer if the wearer so desires (i.e. If someone asks what the bomb is about), depending on the person, they can say it is personal, or it can be the opening to enlightening others about breast cancer (awareness, and the fact that there is not a "cure"-yet).

Another aspect, I wanted is a weight that would be comfortable for all of these uses. Some cannot handle much weight hanging from their ears, like me :)

And lastly, I needed it to be repeatable, and as I stated before, do not do delicate work, my fingers do not cooperate, so the cutting, dapping, twisting, etc required to make each piece is all within my capabilities, and it is important that I have a hands on approach at least in the beginning. It my be cast down the road, depending on the demand, and getting as many out there as possible is obviously my desire, not only to pay my bills, but to hopefully make enough to contribute a fair amount to the cause, along with a slightly different awareness than the pink ribbon instills.

I am thinking and working on other breast cancer pieces, but as I have learned from this experience, it may be a while before any are completed. But along the way, the process is extremely therapeutic.

Sterling Bark textured Cuff - size Med-Small

Wed, 09 Dec 2009 00:21:37 -0500

$29.00
BOGO sale- see shop announcement for details

This oval cuff is made from a piece of thick 8 gauge Argentium sterling silver wire that has been hammered flat, then repeatedly on the outside with an edge of a flat headed chasing hammer, resulting in the bark like appearance. The bracelet was heat treated to activate Argentium's tarnish resistance element and then tumbled hard and shiny.

This is a size medium-small, with the length of silver being 5.5 inches, it should fit a 6 inch wrist nicely, with some flexibility in either direction.

Available in other sizes in the store or to order.

Organic flow ring - size 6

Tue, 08 Dec 2009 23:50:57 -0500

Textured Sterling Hoops - medium

Tue, 08 Dec 2009 23:49:44 -0500

$11.00
BOGO sale- see shop announcement for details

These hoops were made from 19 gauge Argentium sterling silver wire, hammered from the side first to flatten the round edges then on the outer edge for added dimension, making the wire appear squared. The hoop diameter measures just over 1 3/8th inches.

They have been heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

Dainty Smooth Stacker Ring

Tue, 08 Dec 2009 22:27:30 -0500

$8.00
BOGO sale- see shop announcement for details

The price is for one ring.

These rings are made from 16 gauge Argentium sterling silver, fused closed (not soldered).

They are heat treated to harden and activate to tarnish resistance in Argentium Silver, then tumbled shiny. Also Argentium seems to harden more than regular sterling, making this dainty ring quite durable.

Please specify what U.S. size(s) you desire under note to seller when ordering (Available in US sizes up to 10).

You may also like my Dainty Hammered Stacker Rings:
http://www.etsy.com/view_listing.php?listing_id=29031225

Lapis Lazuli Columns

Tue, 08 Dec 2009 22:11:38 -0500

$15.00
BOGO sale- see shop announcement for details

These earrings are composed of several small lapis chip beads strung on 19 gauge handmade Argentium sterling silver headpins, that hang from ear wires made from the same material. The silver parts were heat hardened to activate Argentium's tarnish resistance element before assembly.

Length is about 2 inches from top of ear wire to base, and the columns are about 1/4 inch in width.

Dimpled Disk Drops

Tue, 08 Dec 2009 22:11:38 -0500

$16.00
BOGO sale- see shop announcement for details

I fused Argentium Sterling silver into balls, hammered, annealed, hammered, annealed, etc. until a flat circle, but not perfectly circular, I smoothed the edges but left them the more organic shape. I then Dimple hammered the disk for added texture and shine. The earwires are handmade 19 gauge Argentium sterling silver. The diameter of the forms is a little over 1/2 inch and the length from top of ear wire to base of oval form is about 1 1/4 inches

The earrings have been heat hardened to activate Argentium's tarnish resistance element, then tumbled in addition.

Hammered Sterling Hoops - medium

Tue, 08 Dec 2009 22:11:38 -0500

$10.00
BOGO sale- see shop announcement for details

These hoops were made from 19 gauge Argentium sterling silver wire, hammered from the outer edge rather than from the side for added dimension from the front. The hoop diameter measures about 1 1/4 inches.

They have been heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

Classic Sterling Link Bracelet

Tue, 08 Dec 2009 22:11:38 -0500

$30.00
BOGO sale- see shop announcement for details

Simple but elegant, and can also be used as the base for a charm bracelet.

This bracelet was made from sturdy 16 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered).

The total length of the bracelet is 8 3/8 inches not including excluding hook and should easily fit most wrists. You can hook into any link, so even the smallest wrists can were this... the remaining links can be left dangling or cut off with wire cutters. If you would like me to remove a length of links before shipping please just tell me how much in inches you want removed.

Dainty Hammered Stacking Sterling Ring

Tue, 08 Dec 2009 22:10:43 -0500

$7.00
BOGO sale- see shop announcement for details

The price is for one ring.

These rings are made from 16 gauge Argentium sterling silver, fused closed (not soldered), hammered, and tumbled hard so that they have spring. Please specify what U.S. size you need under notes to seller when ordering (Available in US sizes up to 10). These have also been heat treated to activate to tarnish resistance in Argentium Silver.

You may also like my Dainty Smooth Stacker Rings:
http://www.etsy.com/view_listing.php?listing_id=30908817

Spiraling Sterling Bracelet

Tue, 08 Dec 2009 21:54:44 -0500

$40.00
BOGO sale- see shop announcement for details

This Bracelet was made from literally hand-forming 4 inch long pieces of 16 gauge Argentium sterling silver wire, fusing together a link on one end and balling the center end, then hammering hard and slightly flat. There are a total of 8 spirals.

I have assembled it with each spiral going in opposing directions. If however you would like them all going the same direction, I would happily do that for you, simply note it under note to seller. They are simply intertwined, not permanently attached to one another, but would take 2 turns around to become unwound, which is highly unlikely.

The total length including the handmade hook and about 1 1/4 inch of links on the end is almost 9 inches, with each spiral link measuring just about 1 inch. The diameter of the spiral without the link is about 5/8th of an inch.

It has been heat treated to activate Argentium's tarnish resistance element, and tumbled hard.

Large Textured Sterling Hoops - 1 3/4 in

Tue, 08 Dec 2009 16:18:00 -0500

$12.00
BOGO sale- see shop announcement for details

The price is for a pair of hoops - Qty 1 pair

The hoops are made from 19 gauge Argentium sterling silver. Each circle was individually hammered lightly with the round side of a hammer on the sides and on the outer side from optimum sparkle.

They have been heat hardened to activate Argentium's tarnish resistance element, then tumbled hard and shiny.

Hammered Sterling Stacker Ring - medium thick

Tue, 08 Dec 2009 13:52:25 -0500

$10.00
BOGO sale- see shop announcement for details

The price is for one ring - US sizes 4 to 10

These rings were formed by fusing 12 gauge Argentium sterling silver wire, hand hammering, polishing the inside and side edges for a smooth feel against the skin, and finally tumble hardened. These have also been heat treated to activate to tarnish resistance in Argentium Silver.

please specify size under note to seller

also, if you would like more than quantity available, please let me know how many and I can add to quantity available, as I usually have several sizes of rings already fused ready to be textured or finished for another style ring.

seen in bottom picture other 12 gauge stackers - from left to right
faceted stacker http://www.etsy.com/view_listing.php?listing_id=25971618
chipped stacker http://www.etsy.com/view_listing.php?listing_id=26640131
brush-finish stacker http://www.etsy.com/edit_listing1.php?listing_id=26218935
multifaceted stacker http://www.etsy.com/view_listing.php?listing_id=25715663

Dangling Trios

Tue, 08 Dec 2009 02:15:27 -0500

$25.00
BOGO sale- see shop announcement for details

Dainty but eye catching

The rings (about 1/2 inch diameter) are made from 16 gauge Argentium sterling silver, fused closed (not soldered), hammered on the outside edge, all gathered in a jump ring. They hang from 19 gauge Argentium sterling silver handmade ear wires. They have also been heat treated to activate to tarnish resistance in Argentium Silver and tumbled shiny.

Geometry Made Easy Necklace

Mon, 07 Dec 2009 23:40:26 -0500

$95.00
BOGO sale- see shop announcement for details

Okay, my geeky childhood is coming back to haunt me, but from a better perspective :)

All of the large geometric shaped links of this necklace were made from 16 gauge and the smaller ovals portion from 20 gauge Argentium sterling silver wire and all have been fused closed. Each link was shaped with pliers and hammered. The length slightly under 18 inch when hooked to the last large link, but will extend to up to 25 1/2 inches at full length. Let the extra dangle down the back with the heavier square end-link holding it down for a nice added touch for more revealing summer backs.

The entire necklace weighs about .825 troy ounces and was heat hardened to activate the tarnish resistance element in Argentium sterling silver.

Turquoise Swirls

Mon, 07 Dec 2009 23:40:25 -0500

$19.00
BOGO sale- see shop announcement for details

These earrings are composed of large ice blue Mexican Turquoise beads strung on 19 gauge handmade Argentium sterling silver wire swirl/head pin, that hang from longer than usual ear wires made from the same material. The silver parts were heat hardened to activate Argentium's tarnish resistance element before assembly.

Length is about 2 1/8th inches from top of ear wire to base, and the length of the stones are about 7/8th inch.

Twisted Tears

Mon, 07 Dec 2009 17:00:29 -0500

$14.00
BOGO sale- see shop announcement for details

These lightweight glimmering tears wear made from 19 gauge Argentium sterling silver wire, hammered and twisted and fused to circles to hang from 19 gauge handmade ear wires.

They have been heat hardened to activate Argentium's tarnish resistance element, and tumbled shiny.

The tear shape alone is about 3/4" wide by 1 inch long, the overall length including the ear wire is about 2 inches.

Sterling Daisy Chains - earrings

Mon, 07 Dec 2009 16:59:33 -0500

$18.00
BOGO sale- see shop announcement for details

These fun free flowing flowers were shaped with, get this, my double-sided knitting needles.

If you would prefer shorter (less daises), I would be happy to remove one or two and reduce the price accordingly.

After fusing closed, they were hammered flat, and joined with small fused jump rings stretched into ovals. Each flower measures about 3/4 inch diameter, all 5 hang about 4 1/4 inch below the hand made 20 gauge ear wires.

The entire piece was was made from 20 gauge Argentium Sterling Silver, which was heat hardened to activate Argentinium's tarnish resistance element, then tumbled clean and hard.

Smile Oval open-bangle

Mon, 07 Dec 2009 16:48:57 -0500

$30.00
BOGO sale- see shop announcement for details

Smile? you say, okay, think of the cheshire cat :) ...and I smile when I put it on.

This large oval open-bangle is meant to drape over the hand, and feels so nice against the skin. Please don't judge the bracelet by the look of my hand, lol. But to give you an idea of the draping, I have a 6 1/2 inch wrist, and this bracelet hangs very loosely, a feeling I enjoy, although a small wrist may have a slippage problem with this size.

It was made from a piece of 8 gauge Argentium sterling silver wire (more tarnish resistant than regular sterling silver). I then flattened the wire and hammered the same mark repeatedly, that turned out looking like many many teeth, at least to me. I then shaped the curves by hand forging then shaped the entire piece around an oval mandrel. It has been tumbled hard to maximize spring.

Dainty Sterling Link Bracelet

Mon, 07 Dec 2009 02:26:32 -0500

$25.00
BOGO sale- see shop announcement for details

Simple and dainty.

This bracelet was made from a combination of 16 gauge (larger hammered ovals) and 19 gauge (circle links) Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered).

The total length of the bracelet is 8 1/4 inches including hook and should fit most small to med-large wrists. You can hook into any link, so even the smallest wrists can were this... the remaining links can be left dangling or cut off with wire cutters. If you would like me to remove a length of links before shipping please just tell me how much in inches you want removed.

Nautical Dangles

Mon, 07 Dec 2009 01:14:18 -0500

$22.00
BOGO sale- see shop announcement for details

Why Nautical, why not. No, it just hit me, and I don't ignore things that hit me :)

These earrings are a combination of several small lapis chip beads and hand made solid Argentium sterling silver hammered beads strung on 19 gauge handmade Argentium sterling silver headpins, that hang from ear wires made from the same material. The silver parts were heat hardened to activate Argentium's tarnish resistance element before assembly.

Length is about 1 3/4 inches from top of ear wire to base, and the columns are tapered to about 3/8 inch in width.

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Rustic Shimmer Necklace

Mon, 07 Dec 2009 00:40:09 -0500

$130.00
BOGO sale- see shop announcement for details

This necklace was made from 16 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered). Each circle was individually hammered flat then dimple hammered on both sides for complete texture coverage. The necklace has also been tumbled clean and shiny.

The total length of the necklace is about 24 inch including hook.

Jingle Dangles Bracelet

Mon, 07 Dec 2009 00:40:09 -0500

$60.00
BOGO sale- see shop announcement for details

No there aren't bells, but this bracelet jingles like a belly dancers whatchamacallit around their waist.

It is made entirely from 16 and 12 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered) with the smallest about 3/8 inch diameter and the largest just over 7/8th inch diameter.

Each circle was individually hammered with the flat side of a hammer on the outer side and side or flattened from the side for added texture and variation.

The total length of the bracelet is 9 inches including hook and should easily fit most wrists. You can hook into any circle, so even the smallest wrists can were this... the remaining links can be left dangling doubled up into the hook or cut off with wire cutters.

Sterling Ovals and Circles Bracelet

Mon, 07 Dec 2009 00:14:58 -0500

$20.00
BOGO sale- see shop announcement for details

This bracelet was made from 19 gauge Argentium Sterling Silver wire handmade links. All links were fused, not soldered. The Ovals remain in the circular wire and the circles have been hammered flat for added shine and variety. The bracelet has been heat hardened to activate Argentium's tarnish resistance element, and tumbled shiny.

The total length of the bracelet is just over 8 1/2 inches including hook and should fit most small to med-large wrists. You can hook into any link, so even the smallest wrists can wear this... the remaining links can be left dangling or cut off with wire cutters. If you would like me to remove a length of links before shipping please just tell me how much in inches you want removed.

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Matte Finish Stacker Ring - medium thick

Sun, 06 Dec 2009 21:34:35 -0500

$10.00
BOGO sale- see shop announcement for details

The price is for one ring - US sizes 4 to 10

These rings were formed by fusing 12 gauge Argentium sterling silver wire, brushing the outside for a matte finish, polishing the inside for a smooth feel against the skin, and finally tumble hardened.

please specify size under note to seller

also, if you would like more than the quantity available please let me know how many and I can update quantity, as I usually have several sizes of rings already fused ready to be textured or finished for another style ring.

seen in bottom picture other 12 gauge stackers - from left to right
hammered stacker http://www.etsy.com/view_listing.php?listing_id=25971618
chipped stacker http://www.etsy.com/view_listing.php?listing_id=26640131
brush-finish stacker http://www.etsy.com/edit_listing1.php?listing_id=26218935
multifaceted stacker http://www.etsy.com/view_listing.php?listing_id=25715663

Half to Charity-Save the TaTas Bracelet

Sun, 06 Dec 2009 18:46:48 -0500

$80.00
50% of the sales of this item will go to a breast cancer non profit organization.

This OOAK bracelet was handcrafted from Argentium sterling silver. Each "tata" varies from the other as they were pounded out of balls of silver, drilled, and fused (I found this very therapeutic ! )

The length of the bracelet, including the 3/4 inch hook and 1 3/4 inch of chain after the last TaTa, is 9 inches. This should fit most wrists as you can attach the hook to any link.

The entire piece has been heat hardened to activate Argentium's tarnish resistance element and tumbled.

Sterling Stepping Stones Bracelet

Sun, 06 Dec 2009 14:51:21 -0500

$70.00
BOGO sale- see shop announcement for details

This "stepping stones" were made from fused balls of Argentium sterling silver, hammered over and over on cement with a brass mallet, creating their own combination of unique grains and markings from the hammer. I lightly filed and sanded all the surfaces, but the shapes created were left untouched. The "stones" are connected with solid 16 gauge fused Argentium sterling silver wire ovals.

Total length is 9 inches, including the hook. It is shown in the picture on my neighbors small wrist, hooked on the closest ring. I have a 6.5 inch wrist and it still hooked on the same ring on me, but without quite as much draping :) So with the 3 additional oval rings (which measure 1 inch combined), this should fit most wrists.

The entire piece was heat treated to activate Argentium's tarnish resistance element, and tumbled hard and smooth. Total weight is over a troy ounce. I personnally like the weight of it on my wrist.

Sterling Swirl Pendant

Sun, 06 Dec 2009 09:36:21 -0500

$28.00
BOGO sale- see shop announcement for details

This pendant was made from fused Argentium sterling silver, hammered over and over on cement with a brass mallet, then I carved in the swirl. It was intended to look like a fossil.

The thickness varies between 12 and 14 gauge overall, with the largest diameter measuring about 1 3/8 inch diameter. The entire piece was heat treated to activate Argentium's tarnish resistance element, and tumbled hard. Total weight is almost 0.5 troy ounce.

Multifaceted Sterling Cuff Bracelet - size medium

Sun, 06 Dec 2009 02:32:14 -0500

$30.00
BOGO sale- see shop announcement for details

This oval cuff, made from thick 8 gauge Argentium sterling silver wire has been formed with rounded ends on an oval mandrel, and flat hammered hard multiple times to add the glimmering facets, rather than round hammer marks on a flat bracelet. The inner side, that lays next to the skin, has been polished smooth. It has been heat hardened to activate the tarnish resistance element of Argentium Sterling then tumbled to bring out the shine.

This size is good for 6.5 inch wrist give or take a little.

Available in other sizes in the store or to order.

Hammered Circle Hoops Bracelet

Sun, 06 Dec 2009 00:11:53 -0500

$40.00
BOGO sale- see shop announcement for details

This bracelet was made from 16 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered) with the smallest about 3/8 inch diameter and the largest just over 3/4 inch diameter. Each circle was individually hammered lightly with the flat side of a hammer for the handcrafted effect. The bracelet has been tumbled clean and shiny.

The total length of the bracelet is 9 1/2 inch including hook and should easily fit most wrists. You can hook into any circle, so even the smallest wrists can were this... the remaining links can be left dangling or cut off with wire cutters. If you would like me to remove a length of links before shipping please just tell me how much in inches you want removed.

Turquoise Rock Drops

Sat, 05 Dec 2009 23:05:46 -0500

$15.00
BOGO sale- see shop announcement for details

These earrings are composed of large ice blue Mexican Turquoise beads strung on 19 gauge handmade Argentium sterling silver headpins, that hang from ear wires made from the same material. The silver parts were heat hardened to activate Argentium's tarnish resistance element before assembly.

Length is about 1 7/8th inches from top of ear wire to base, and the width of the stones are almost 1/2 inch in.

Basic Sterling Hoop 1 inch

Sat, 05 Dec 2009 01:25:04 -0500

$7.50
BOGO sale- see shop announcement for details

The price is for one pair of hoops

1 inch diameter hoops are made from 19 gauge Argentium Sterling Silver wire, and have been heat treated to activate Agentium's tarnish resistance element and tumbled shiny.

These are not just cut, formed and bent. Edges have been hand filed for smooth edges, in addition to the heat treating and high quality sterling used.

My sister in law uses some of my hoops in her beaded jewelry at http://www.etsy.com/shop/PebblesCreations

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Organic Flow Ring- medium - size 5.5

Fri, 04 Dec 2009 20:47:39 -0500

$18.00
BOGO sale- see shop announcement for details

This ring was form by fusing 12 gauge Argentium sterling silver wire, then continuing to torch it carefully to melt into this organic shape, without balling or splitting the ring. It was then shaped around a mandrel to a size 5.5 and finished with rotary tools, files and hammer. Then ring has been heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

I will not be making these rings to size, however, I plan on making more, that end up different thicknesses and sizes. The form desired comes first, the size that results will be the size of the ring, if that makes any sense what so ever :)

Hammered Teardrops

Fri, 04 Dec 2009 19:37:27 -0500

$22.00
BOGO sale- see shop announcement for details

The teardrops are made from 12 gauge Argentium sterling silver, fused, then hand forged into the teardrop shape. and hammered with the round side of a peening hammer for the sparkling texture. The tears hang from 19 gauge handmade Argentium sterling silver ear wires. The earrings were heat hardened to activate Argentiums' tarnish resistance element, and tumbled shiny.

The tear drops mearsure about 1 inch long by 3/4 inches wide, and the total length from top of ear wire to base is about 1 5/8th inches.

Organic Flow Ring - size 15

Thu, 03 Dec 2009 21:47:54 -0500

$32.00
BOGO sale- see shop announcement for details

Yep size 15, and over a half troy ounce of silver

This ring was form by fusing 8 gauge Argentium sterling silver wire, then continuing to torch it carefully to melt into this organic shape, without balling or splitting the ring. It was then shaped around a mandrel to a size 15 and finished with rotary tools and hammer. Then ring has been heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

I will not be making these rings to size, however, I plan on making more, that end up different sizes. The form desired comes first, the size that results will be the size of the ring, if that makes any sense what so ever :)

Chunky Sterling fused chain Necklace

Thu, 03 Dec 2009 21:19:39 -0500

$65.00
BOGO sale- see shop announcement for details

All of the large round links of this necklace were made from 16 gauge Argentium sterling silver wire and all have been fused closed. Each Link measures approximately 3/8 inch diameter, almost a centimeter on the outer edge. The total length including the hook is just shy of 20 inches. You hook it to whatever link you desire.

Hang favorite charms from it a large pendant, or just as a chain. If you would like one of my pendants permanently attached to the center ring, I would be happy to do so, of course you would need to purchase it too :)

The entire necklace weighs about .845 troy ounces and was heat hardened to activate the tarnish resistance element in Argentium sterling silver. I will also include 5 sterling jump rings, in case you would like to attach various charms or whatever.

Sterling Bark textured Cuff - size Medium

Thu, 03 Dec 2009 20:31:02 -0500

$30.00
BOGO sale- see shop announcement for details

This oval cuff is made from a piece of thick 8 gauge Argentium sterling silver wire that has been hammered flat, then repeatedly on the outside with an edge of a flat headed chasing hammer, resulting in the bark like appearance. The bracelet was heat treated to activate Argentium's tarnish resistance element and then tumbled hard and shiny.

This is a size medium, with the length of silver being 6 inches, it should fit a 6.5 inch wrist nicely, with some flexibility in either direction.

Available in other sizes in the store or to order.

Organic Flow ring - size 7 3/4

Thu, 03 Dec 2009 20:02:57 -0500

$20.00
BOGO sale- see shop announcement for details

This ring was form by fusing 8 gauge Argentium sterling silver wire, then continuing to torch it carefully to melt into this organic shape, without balling or splitting the ring It was shaped around a mandrel to a size 7.75 and finished with rotary tools and hammer, then heating to activate Argentium's tarnish resistance element and tumbling hard and shiny.

I will not be making these rings to size, however, I plan on making more, that end up different sizes. The form desired comes first, the size that results will be the size of the ring, if that makes any sense what so ever :)

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Basic Sterling Hoops 1.25 inch

Thu, 03 Dec 2009 19:33:56 -0500

$8.00
BOGO sale- see shop announcement for details

The price is for one pair of hoops

1 1/4 inch diameter hoops are made from 19 gauge Argentium Sterling Silver wire, and have been heat treated to activate Agentium's tarnish resistance element and tumbled shiny.

These are not just cut, formed and bent. Edges have been hand filed for smooth edges, in addition to the heat treating and high quality sterling used.

My sister in law uses my hoops for some of her beaded jewelry at http://www.etsy.com/shop/PebblesCreations

Support the Florida Etsy Street Team, visit www.etsyFEST.com

Falling Rocks

Thu, 03 Dec 2009 13:31:14 -0500

$20.00
BOGO sale- see shop announcement for details

These fun earrings were made with handcrafted tiny sterling headpins, jump rings, ear wires, and small polished rock beads, yep rocks, like gravel.

They measure about 2 1/4 inches from top of ear wire to base.

Double Spiral and Turquoise Earrings

Thu, 03 Dec 2009 00:36:27 -0500

$25.00
BOGO sale- see shop announcement for details

The spirals were hand-formed from 16 gauge Argentium sterling silver wire. They intertwine going in opposing directions.

All of the silver parts were heat hardened to activate Argentium's tarnish resistance element, and tumbled hard before the turquoise was added.

The entire length is about 2 1/4 inches from top of ear wire to base.

Sterling Button Drops

Wed, 02 Dec 2009 23:59:26 -0500

$18.00
BOGO sale- see shop announcement for details

I fused Argentium sterling silver into balls, dapped, annealed, dapped, annealed, etc. and filed the edges just to smooth, but left the organic curve of the edge. I then drilled the holes and brush finished the "buttons". The ear wires are longer than usual, made of 19 gauge Argentium sterling silver. The largest width of the form is a little over 3/8th inch and the length from top of ear wire to base of oval form is about 2 1/8th inches

The earrings have been heat hardened to activate Argentium's tarnish resistance element, then tumbled in addition.

Showers/Flowers Earrings

Wed, 02 Dec 2009 23:01:19 -0500

$20.00
BOGO sale- see shop announcement for details

April Showers bring May Flowers was obviously the objective in this design. You get 4 different looks with one set. (1-just hoops, 2-hoops with drops, 3-hoops with flowers, and 4-asymmetrical).. The hoops measure about 1 1/8 inch diameter and are finished hard and smooth. The raindrops and daisies were fused, not soldered and have a hammered finish for sparkle and are about 1 inch diameter. All elements were made from 17 gauge Argentium Sterling Silver, more tarnish resistant than regular sterling.

Sterling Cross Earrings

Wed, 02 Dec 2009 23:01:18 -0500

$10.00
BOGO sale- see shop announcement for details

The crosses were made from 18 gauge sterling silver sheet, cut soldered, hammered, and tumbled hard. They hang from 20 gauge sterling silver ear wires. The crosses measure approximately 1 inch high by 3/4 inch wide.

Twists and Turns

Tue, 01 Dec 2009 12:13:57 -0500

$18.00
BOGO sale- see shop announcement for details

.. or abstract Christmas Trees?

The curls are made from 16 gauge Argentium sterling silver, hammered on a tapered Mandrel for increasing width at the bottom. The twist in the center was made from 19 gauge Argentium sterling silver, hammered flat and twisted. The two pieces hang independent of one another from 19 gauge handmade argentium sterling silver ear wires.

They have been heat hardened to activate Argentium's tarnish resistance element, then tumbled shiny.

Diameter of the widest point is about 1/2 inch, and length from top of ear wire to base is 2 3/8th inches.

Triple Ohhh - Asymmetrical Sterling Necklace

Mon, 30 Nov 2009 20:55:37 -0500

$100.00
BOGO sale- see shop announcement for details

Intended to hang asymmetrically, very shiny yet earthy at the same time.

The large circles were formed by fusing wide Argentium sterling silver wire, fusing to jump rings, hammering flat, then hammering for texture, brush finishing the back side. The links alternate flattened and dimple hammered circles and oval, flat hammered on the outside. The entire piece was heat hardened to activate the tarnish resistance element in Argentium sterling, and finally tumble hardened.

Total length 22 1/2 inches without the hook included. The circles measure about 1 1/2 inch diameter, 1/16 inch thick, and about 3/16" wide. This is a somewhat heavy necklace intentionally, but keep in mind the person who will be wearing them.

Essssss Swirls

Sun, 29 Nov 2009 22:38:37 -0500

$20.00
BOGO sale- see shop announcement for details

Made of 19 gauge argentium sterling silver wire, the Es shapes were hand shaped, then hammered slightly flat. They hang from handmade 19 gauge Argentium sterling silver earwires.

They have been heat hardened to activate Argentium's tarnish resistance element, then tumbled hard and shiny.

Diameter of the widest swirl is about 1/2 inch, and length from top of ear wire to base is about 1 5/8th inches.

Save the TaTas -portion to breast cancer charity

Sun, 29 Nov 2009 01:22:56 -0500

$35.00
30% of the sales of this item will go to a breast cancer non profit organization.

These earrings were handcrafted from Argentium sterling silver. The "ribbon" dangles from links behind the "tatas".

From top of ear wire to base they measure about 2 inches, with the "tatas" being about 1/2 inch diameter

They have been heat hardened to activate Argentium's tarnish resistance element and tumbled.

Baker's Dozen Dangles

Sat, 28 Nov 2009 23:18:30 -0500

$28.00
BOGO sale- see shop announcement for details

Dainty but eye catching

The 12 small rings (about 3/16 inch diameter) are made from 19 gauge Argentium sterling silver, fused closed (not soldered), hammered on the outside edge, all gathered in a larger 19 gauge ring (about 5/8 inch diameter) also fused closed. They hang from 19 gauge Argentium sterling silver handmade ear wires. They have also been heat treated to activate to tarnish resistance in Argentium Silver and tumbled shiny.

Hammered Cuff - Large

Sat, 28 Nov 2009 14:56:29 -0500

$75.00
BOGO sale- see shop announcement for details

This oval cuff was cut from thick 14 gauge Argentium sterling silver sheet, then pounded repeatedly with a couple of different tools to create the all over texture. It was then shaped around an oval mandrel, edges finished smooth, heat treated to activate Argentium's tarnish resistance element, and tumbled hard and smooth.

The total length is 7 inches with a width of about 15 mm ( over 1/2 inch).

This is a good size for about a 7.5 inch wrist, give or take a little, as it is somewhat adjustable.

Lapis Lazuli Hoops

Fri, 27 Nov 2009 16:30:59 -0500

$30.00
BOGO sale- see shop announcement for details

The hoops were handmade from 19 gauge Argentium sterling silver. They are adorned by alternating polished chip beads of lapis lazuli and handmade solid hammered silver beads. The silver parts were heat hardened to activate Argentiums tarnish resistance element and tumbled hard and shiny prior to assembly.

They measure about 1 1/4 inches diameter.

I am going to have to make myself a pair of these!

Sterling Heart Posts

Thu, 26 Nov 2009 01:44:41 -0500

$15.00
BOGO sale- see shop announcement for details

The hearts, about 1/2 inch diameter (at the widest point), were cut from thick 14 gauge Argentium Sterling Silver sheet with a handmade post soldered on the back. The surface of the hearts have been matte brush finished, while the side edges are smooth and shiny. They include purchased sterling silver backs.

They have been heat treated to activate Argentium's tarnish resistance element, then tumbled hard.

Snowmen Dangles

Wed, 25 Nov 2009 23:50:49 -0500

$12.00
BOGO sale- see shop announcement for details

These earrings were formed from fine silver wire, fused, and hammered. They are approximately 1 1/8 inch long not including ear wires, with the bottom circle measuring 3/4 inch diameter. The ear wires were hand formed from 19 gauge Argentium sterling silver wire.

Organic Flow Ring Thin - Size 3.5

Sat, 21 Nov 2009 13:47:35 -0500

$14.00
BOGO sale- see shop announcement for details

This ring was form by fusing 16 gauge Argentium sterling silver wire, then continuing to torch it carefully to melt into this organic shape, without balling or splitting the ring. It was then shaped around a mandrel to a size 3.5 and finished with rotary tools, files and hammer. Then ring has been heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

I will not be making these rings to size, however, I plan on making more, that end up different thicknesses and sizes. The form desired comes first, the size that results will be the size of the ring, if that makes any sense what so ever :)

Faceted Ball Ring - sized to order

Fri, 20 Nov 2009 22:32:53 -0500

$16.00
BOGO sale- see shop announcement for details

Note- this is ring is not completely finished so that I can make it the size you want. Once I have a size, I will cut the 16 Argentium sterling silver wire band and fuse it together, and finish it off, which I should be able to do in just a day or two.

The ball is a fused ball of Argentium sterling silver which was hammered with the flat side of a finishing hammer to create the faceted look. The ball had been fused to 16 gauge Argentium sterling silver wire, no solder used.

It will be heat hardened to activate Argentium's tarnish resistance element and tumbled shiny.

In this picture, it is wrapped to about a size 9.

Please note size in note to seller.

Dapped Textured Square Earrings

Fri, 20 Nov 2009 20:55:38 -0500

$22.00
BOGO sale- see shop announcement for details

The squares were cut from 18 gauge sterling silver sheet, textured, dapped, and edges filed smooth. They hang from 18 gauge sterling silver ear wires. Each Square after dapping measures about 1 inch by 1 inch, corner to corner about 1 3/8 inches.

Reversible Dome/Concave Ring Dangles

Fri, 20 Nov 2009 10:09:45 -0500

$23.00
BOGO sale- see shop announcement for details

The rings (about 7/8 inch diameter) are made from 12 gauge Argentium sterling silver, fused closed (not soldered), dapped, soldered to a small jump ring, then matte brush finished. They hang from 19 gauge Argentium sterling silver handmade ear wires. They have also been heat treated to activate to tarnish resistance in Argentium Silver and tumbled.

You can wear them either way (simply slide them off the ear wire and replace the opposite direction)

Copper Swirls

Tue, 17 Nov 2009 00:01:37 -0500

$18.00
BOGO sale- see shop announcement for details

These earrings were made from copper wire, hand curled, hammered and treated with a green patina. However, the earring back and post were made of sterling silver, soldered to the back of the top copper coil. You don't really see the silver, but that is what goes through the ear. Also included are purchased medium sterling silver ear nuts.

The copper was covered with a clear enamel paint to help protect the finish as is.

Little over 2 inches long.

Striped Circles - Oxidized

Mon, 16 Nov 2009 14:32:53 -0500

$23.00
BOGO sale- see shop announcement for details

Fun dangles !

Made from fused 12 gauge sterling silver wire circles, hammered flat, then marked with stripes with chasing tools. After I brush finished the circles, I oxidized them black and brush them with steel wool to create the surface look. They hang from 19 gauge sterling silver ear wires.

The circles are about 1 1/8th inch diameter.

Double Tear Drops

Mon, 16 Nov 2009 13:49:10 -0500

$15.00
BOGO sale- see shop announcement for details

These lightweight dangles were made from 19 gauge Argentium sterling silver wire, fused. shaped, hammered and lightly fused together. They hang loosely from handmade 19 gauge Argentium sterling silver ear wires.

The outer edge of the tear drops measure about 7/8 inch wide and 1 1/4 inch long. Total length from top of ear wire to base is about 1 3/4 inches.

After completion the earrings were heat treated to activate Argentium's tarnish resistance element, and tumbled hard and shiny.

Flippin Hearts Bracelets

Sun, 15 Nov 2009 19:41:16 -0500

$110.00
BOGO sale- see shop announcement for details

The price listed is for each one.

This bracelet was hand cut, using a fine jeweler's saw, from one sheet of thick 14 gauge Argentium sterling silver, filed edges (inside and out) smooth, shaped on an oval mandrel and brush finished. They have been heat treated to activate Agentium's tarnish resistance element. They measure approximately 6 " long, and an 1" high and each weigh slightly over one troy ounce. As it is a cuff, it is slightly adjustable.

Squared Circles Bracelet with toggle

Fri, 13 Nov 2009 14:59:40 -0500

$40.00
BOGO sale- see shop announcement for details

This bracelet was made from 16 gauge Argentium Sterling Silver wire, more tarnish resistant than regular sterling, as I have heat treated it. The circles were fused (not soldered) with the smallest about 3/8 inch diameter and the largest just over 3/4 inch diameter.

Each circle was individually hammered lightly with the flat side of a hammer on the flat side and on the outer side to make it appear like square wire.

The total length of the bracelet is about 9 1/2 inch including toggle and should easily fit most wrists. the circle end of the toggle is attached to a ring for a buyer this was made for, but can be move to another ring for a different size wrist as I did not fuse closed the finding (although it is work - heat and tumble hardened so it should not pull open easily by accident. )

If you would like me to move the toggle, just let me know how long you would like the bracelet, at least 1/2 inch longer than your wrist measurement.

Silver Copper Circlessssss

Thu, 12 Nov 2009 19:37:42 -0500

$26.00
BOGO sale- see shop announcement for details

Yes! I have started adding Copper!

The main rings are handmade of 16 gauge fused, hammered, Argentium Sterling Silver. The Copper jump rings were all handmade - those with the patina were hammered somewhat flat first. Both the plain copper and the ones with patina were all sprayed with a clear finish to help protect the color.The silver pieces were all heat hardened before assembly to activate Argentium's tarnish resistance element.

The rings, almost 3/4 inch diameter hang from handmade 19 gauge Argentium sterling silver ear wires. Total length from top of ear wire to base is about 1 3/4 inches.

Stone and Pebble Hoops

Tue, 10 Nov 2009 23:51:24 -0500

$22.00
BOGO sale- see shop announcement for details

These hoops and tiny sterling headpins/pebbles were made from 19 gauge Argentium sterling silver. The silver parts were heat hardened to activate Argentiums tarnish resistance element and tumbled hard and shiny. The silver beads were then removed and replaced with alternating small polished stones.

They measure a little over 1 1/4 inches diameter. From top to bottom of stones measures about 1 1/2 inches.

Twisted Circle Dangles

Tue, 10 Nov 2009 10:22:54 -0500

$22.00
BOGO sale- see shop announcement for details

These ¾” diameter front-facing hoops were formed by flattening 12 gauge Argentium sterling silver wire (heat hardened to activate Agentium's tarnish resistance element) , then hand twisted, cut, filed and fused together. The hand made ear wires were also made from Argentium sterling silver wire.

Double Diamond Drops

Mon, 09 Nov 2009 20:24:57 -0500

$14.00
BOGO sale- see shop announcement for details

These dainty dangles were made from 16 gauge Argentium sterling silver wire, fused. shaped, hammered and fused to a closed jump ring for hanging from long handmade 19 gauge Argentium sterling silver ear wires.

The double diamond shape measures about 1 1/8 inches long and 7/8 inches wide. Total length from top of ear wire to base is about 2 1/4 inches.

After completion the earrings were heat treated to activate Argentium's tarnish resistance element, and tumbled hard and shiny.