So thru the years this store has evolved and what we learned is quality materials matter, we use high commercial quality vinyl and professional machines, we love hobbiest but would you trust your wall or car art to an amateur machine?
Our products have a long life span and we will customize any item.
Our cases are made with high quality impact molded rubber and are made to order.


We directly manufacturer or under direct consignment ( all consignment products will be clearly listed as such) any products listed on our store. Please note some items are sold in small batches and may take some production time.


Langley Products Decal Installation Tips
Step 1: Look where you're going!
Clean, dry and smooth should describe your surface. If you've painted within the last 3 weeks make sure your paint is completely set. We know you're real excited to get these suckers on the wall - but put on the brakes if you can stand it.
Included is a test piece so you know how it will react with your surface….Try it out.
Also, cut the individual images out and tape them up on the wall so you know exactly where you want them to go. Smacking prematurely is not recommended!
We Ship the items with transfer tape & backing larger than the image for safe shipping so feel free to cut off the excess or break up large sayings and pieces, we do not recommend actually cutting the vinyl into sections however.
Step 2: Prep your design for installation
This step helps the vinyl stick to the clear transfer tape so you can peel off the white backing paper.
Put the design on a table, graphic side up. Use the squeegee if you purchased one(We Highly recommend for large and detailed designs) You can use a credit card, one of those hotel room keys that you're not sure you are obligated to give back, or a rubber spatula. Don't use a metal spatula.) Press and firmly drag the squeegee back and forth across the design. Now flip it over and do the same thing on the other side
Step 3: Peel off the white backing paper
With the design face down, start at a corner and peel the white backing paper off the clear transfer tape, rolling it back as you go.
We use clear transfer tape so you can see the graphic and makes installation a breeze.
Some of the more complicated graphics may be stubborn, and the vinyl doesn't release as easily from the white backing paper to the clear transfer tape. When this happens, don't freak out! Just stop peeling and roll back a little, and try again. You may need to crease the white backing paper where the vinyl isn't releasing in order to coax the vinyl off. The key to success is to go slow.
Step 4: Time to Marry To your Wall
Carefully stick down your design with the sticky side of the clear transfer tape (and the vinyl) facing the destination surface. Use your squeegee to gently rub the design onto the surface, smoothing out any imperfections and pushing out air bubbles. The more you get the design to stick, the easier it will be to remove the clear transfer tape. Rub from the inside out

Step 5: Remove the clear transfer tape
This part can be a little tricky. Go real slow and roll back the clear transfer tape just like you did with the white backing paper. As you go, the vinyl design should remain on the destination surface. If you rush and tear it off like a band-aid you'll risk mucking it up or stretching it out. Go slow. Breathe. Go slow.
And now for the final step...Any bubbles can poped with a small needle
Step 6: Sit back and enjoy your new
Freals. Enjoy it. And take a picture to send it to us so we can put it up on our product pages! Help us spread the love. Thank you for your purchase

Warmest Regards,
Langley Family