These molds are made with liner material; however there are major factors in making soap regarding the mold and loaf removal. Most important, Vacuum Lock and Water Evaporation is the key to soap shrinking and not sticking to the mold and soap sticks to everything. Shrinking the loaf away from the mold for most takes to long, unless a heated process is used.
(FOR QUICK LOAF MOLDING, USE A SLIP) REMOVE YOUR SOAP WITHIN 12-24 HOURS, USING A (SLIP) OF PARCHMENT I.E. BAKERS PAPER RIPPED THE LENGTH OF THE MOLD. THIS IS, (NOT A LINER). A LINER MUST COVER THE ENTIRE 5 SURFACES OF A MOLD AND A SLIP DOES NOT. FOR ABSOLUTE BEST USE OF THESE MOLDS USE A SLIP. NO NEED TO OVER TIGHTEN BOLTS, ONLY SNUG PLEASE.
BEFORE USE; PLEASE SEE SHORT INSTRUCTIONS BY GOING TO, (YOU TUBE).
AFTER YOU GET TO THE YOU TUBE SITE - TYPE IN, (DO RIGHT SOAP MOLDS).
WET CP SOAP STICKS TO EVERYTHING AND WILL CAUSE A VACUUM LOCK WHEN UN-MOLDING FROM ANY MOLD AND ANY SOAP, LIKE A CAKE THAT ISN’T DONE. DRYING SOAP IS PART OF THE SOAP MAKING PROCESS. OILS, CLIMATE, RECIPES, OR PROCESSES SUCH AS TRACE TIME WILL CHANGE THE RATE OF WATER EVAPORATION, ETC. DRYING SOAP WITH THE LID OFF IN A DRY CLIMATE WILL SPEED UP THE PROCESS. SOME LIKE TO USE DE-HUMIDIFIERS, OVEN PROCESS OR THE HOT PROCESS, ETC.
(THE TRAY MOLDS) CP, PROCESS ROTATE ALL THE BARS AT ONCE, WITH SIDES AND BOTTOM REMOVED. OVEN, PRE HEAT AT 170.TURN OFF AFTER PLACING IN OVEN. LEAVE IN OVEN FOR 6-12 HRS.
All of my soap molds will withstand temperatures up to 180 degrees continuous and they are for all soap making purposes. Please use a thermometer while checking temperatures and do not trust the oven dial, or other dial settings.
It is and always will be our goal to provide you with our very best. This is our livelihood. I thank you for your purchase and greatly appreciate your business. Please remember to rate us as a 5 star seller and leave positive feedback upon, complete inspection and satisfaction. I hope to do business with you in the future.
Please feel free to call. Thank you for your time and business, Rick.
Toll Free – 1-877-890-0267
Vancouver, Washington,
