If you would like me to give you the exact shipping cost for your location, send me a message.
120 TPI drum carding cloth works well with carding finer fibers like merino and alpaca.
This 8 inch length of new carding cloth can be used to replace the cloth on your hand carders or you can use it when you are building your own new hand carders.
The 8 inch length has tines all the way to the edge. The 9 3/8 inch width has approximately 8 3/8 inches of metal tines with approximately 1/2 inch on each edge that has no metal tines. The metal tines are slightly more than 3/8 of an inch tall.
If you need to remove any tines in order to attach the drum carding cloth to a hand carder, the tines are able to be pulled out from the back of the cloth using a small pliers.
BE CAREFUL because the metal tines are definitely sharp, but they are NOT needle sharp.
NOTE: If you would like to purchase a longer or shorter piece of carding cloth than what I have listed, contact me and I will make a listing for you for the length you need.
Feel free to ask any questions you may have; I will check for messages and answer questions daily. I ship within 3 days of receiving cleared payment.