Office Chair Slip Cover

Description

Add some life to that cubicle or dorm room by slip covering your drab office chair.

Simply tell me your colors in a message at checkout, and I will find a great fabric for you. I will also need these measurements from you before I can start:

Seat - The one in the photos is 16.5" square with rounded corners.
*Measure straight across the center of the seat, allowing your measuring tape to follow any contour, so the tape is flat on the surface of the seat.

Back - The one in the photos is 14.5" wide in front and 18.5" wide in the back (also with rounded corners)and is set at 13" high from the seat. It has a big knob in the back for adjusting the height, so that is why it is wider in the back than in the front - measurement includes going over the top of the knob. I need you to measure your chair back from the front side and the back side. You need to be sure you have it adjusted to the height you like for the cover to be perfect.
*Measure the same way you did for the seat, so I am getting the widest measurement.

The chair cover in the photo has about a hundred pleats in the skirt. If you prefer I can make your skirt with pleats only at the corners, or with a ruffle. I will assume you want the 100 pleat skirt unless otherwise specified.

This price is for office chairs with seats and backs up to 20" by 20" and a short skirt. If your chair is bigger than that, or if it has arms, please contact me with your measurements for a custom price quote.

The seat cover and the back cover are separate pieces. The seat cover is held in place with elastic at the bottom which is completely hidden. The back cover is held in place by the amazing custom fit.

Here is some feedback from a recent slipcover customer:
"Hi Cherie. I wanted to let you know that the slip cover arrived and it is just BEAUTIFUL. It fits the chair perfectly - just loose enough to go on easily, but fitted enough to look very sharp.

Thanks so much for the fine job you did on the slip cover. I am amazed you got such a good fit working on it with just pictures and measurements. I will definitely recommend your work to anyone who might be interested in slip covers."

Added on Nov 09, 2009