Classic Ring

Description

This item is for a SINGLE bone ring only. Depicted are a couple of example of the classic ring design. If you would like a ring made I will require a ring size. Read the size section for more information.

SHAPE:
The ring is smooth all around with no carved features.

SIZE:
The rings profile is a slightly flattened circle, tends to be slightly flatter on the inside than the outside. Profile measures roughly 4-5 mm. Before I begin I will need the ring size.

Please give me the measurements either in metric or imperial scales with as much accuracy as possible, (I prefer metric). Note: sending me sizes from a "ring sizer" is not ideal since I don't have non-local sizers. Note: The nature of the bone at such a delicate size requires that the fit is not tight as it can't be forced too much or you risk breaking the ring. Getting measurements is described bellow:

1. Find a ring that is comfortable to slide onto a finger of the hand you wish the ring for.
2. Measure its inner diameter (measurement between inner sides).

FINISH:
These rings are depicted with an oiled polished surface finish. Please read the shop announcement for information on alternate finishes.

IMPORTANT NOTE:
The nature of the material means there MAYBE some artefacts in the final finish. Please read the shop announcement for more specific information.

Added on Sep 22, 2009