xTool M2 Large Basic positioning frame + template for 8 business cards | STL files for 3D printing

Positioning eight business cards without remeasuring every time.

With the MijnMakerij Large positioning frame and the matching business card template, you give eight cards a fixed place in your xTool M2. Handy for engraving logos, names, and contact details, and for producing small batches.

The four-part frame positions the removable die in the machine hopper. You place the die directly between the frame parts, without locking pins. The eight card positions have a grid bottom and finger cutouts, so you can easily insert and remove the cards.

THIS IS WHAT YOU RECEIVE
• STL file(s) to print the four-part Large positioning frame.
• STL file for the template for 8 business cards.
• Digital files for self-3D printing.

FEATURES
• Designed for the xTool M2.
• Business card template of 300 × 300 × 3 mm.
• Eight horizontal card positions, divided over two columns.
• Grid base to support the cards.
• Finger recesses for easy changing.
• Hollowed-out frame parts for reduced material usage.
• Removable mold, without locking pins.

CHECK YOUR PRINT SIZE
The business card template is printed as a single piece and requires a usable print area of ​​at least 300 × 300 mm. Therefore, it does not fit on a standard build plate of 256 × 256 mm.

The individual frame parts are approximately 119 × 205 × 3 mm.

PRINT ADVICE
Print flat and at 100% scale. PLA is suitable for normal use as a positioning aid. Supports are not necessary.

Allow the parts to cool before checking the fit. Printer settings and filament can affect the final dimensions.

USAGE
Place the four frame parts in the machine tray and place the template between them. Place your business cards, set the focus, and use the framing function to check if the design is positioned correctly. Perform a test engraving for the first use.

For repetitive work, place the template and the cards against the same stop each time.

IMPORTANT
This is a digital download. You will not receive a printed frame, template, business cards, or laser engraving machine. The photos show a printed example of use.

Before purchasing, check if your printer has sufficient build space and if your cards fit the cutouts. An XCS project, engraving designs, and laser settings are not included.

The frame and the template are positioning aids for engraving, not a cutting surface. Keep the laser beam clear of the plastic.

This design was developed with AI support based on my own dimensions, design choices, and real-world feedback, and adjusted during multiple design rounds.

An independent design by MijnMakerij, not affiliated with or endorsed by xTool.

Questions about the set? Feel free to send a message!