Sell Your Etsy Items Through Instagram - A Step By Step Tutorial

Instant download

GlassFusingDecals

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

Sell Your Etsy Items Through Instagram - A Step By Step Tutorial

Message Seller

CA$65.00


Item details

Handmade item

Digital download (2 PDF, 1 other file)

Materials

24 Page Guide, Easy to Fill Spreadsheet, Comprehensive Google Product Taxonomy List

Ready to start promoting your Etsy Items on a whole new level?

Have you ever seen the little shopping bag icon on Instagram posts, and wondered how you could add that for your own products?

What if you only sell through Etsy, or your own custom site that Instagram/Facebook doesn’t automatically connect to?

YES! It’s totally possible, and now you can do it too!
(I do this with my own work from my other shop, and you can see the results here: instagram.com/flyingfox_studio)

While it might seem daunting at first, it’s totally possible to get your Etsy/Custom products set up so they can become clickable links right in your Instagram posts!

Here is what you get:

- A detailed illustrated 24 page guide that will help you every step of the way from downloading your inventory from Etsy all the way to making those awesome clickable Instagram posts!
- A ready-to-go .csv file that is formatted and ready to be filled in by you to help get those items accessible to Instagram.
- A comprehensive listing of Google Product Taxonomy terms that will help add a little extra SEO to your listings.

Here is what you need to get started:

● This Easy 24 Page Step by Step Guide!
● A desktop computer - this won’t work on a phone (or it will be exceedingly difficult)
● An Etsy Shop filled with your wonderful work (other online shops not supported by Facebook
can be used, but will be a bit more work)
● A Facebook account
● An Instagram account
● The ability to edit .csv files (can be done in Google Docs, or Microsoft Excel)
Ready to start promoting your Etsy Items on a whole new level?

Have you ever seen the little shopping bag icon on Instagram posts, and wondered how you could add that for your own products?

What if you only sell through Etsy, or your own custom site that Instagram/Facebook doesn’t automatically connect to?

YES! It’s totally possible, and now you can do it too!
(I do this with my own work from my other shop, and you can see the results here: instagram.com/flyingfox_studio)

While it might seem daunting at first, it’s totally possible to get your Etsy/Custom products set up so they can become clickable links right in your Instagram posts!

Here is what you get:

- A detailed illustrated 24 page guide that will help you every step of the way from downloading your inventory from Etsy all the way to making those awesome clickable Instagram posts!
- A ready-to-go .csv file that is formatted and ready to be filled in by you to help get those items accessible to Instagram.
- A comprehensive listing of Google Product Taxonomy terms that will help add a little extra SEO to your listings.

Here is what you need to get started:

● This Easy 24 Page Step by Step Guide!
● A desktop computer - this won’t work on a phone (or it will be exceedingly difficult)
● An Etsy Shop filled with your wonderful work (other online shops not supported by Facebook
can be used, but will be a bit more work)
● A Facebook account
● An Instagram account
● The ability to edit .csv files (can be done in Google Docs, or Microsoft Excel)


Reviews

5 out of 5 stars (109)

Downloads

File delivery
Your files will be available to download once payment is confirmed. Here's how.

Returns & exchanges

Due to the nature of our decals, we can only provide a refund if they have been damaged during shipping. Should anything happen to your order during transportation, please take photos and send them to us so we can either refund or replace your order.

Payments

Secure options
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
We accept payment either directly through Etsy, or Paypal!

Additional policies

Frequently asked questions about Glass Fusing Decals! If you have a question that isn’t covered here, please contact Michelle at info@glassfusingdecals.com and she will be happy to help you out.


What type of glass can Glass Fusing Decals be used on?
Our decals can be used on any glass surface, including glazed ceramics!
COE 90, 96 and 104 are the most common, but the only real criteria is that the glass or ceramics you are using can withstand the required firing temperatures for the decals. If they can, you’ll get beautiful crisp, clean decals every time.


What is the difference between High-Fire and Low-Fire decals?
High-Fire decals fire at a temperature of about 1420ºF, whereas Low-Fire decals fire at a temperature of about 1100ºF. Each temperature range has it’s own uses:
High-Fire decals might be used on smaller projects that have been cold-worked and need to go back in the kiln to be fire polished. This is ideal as you can fire out the decal and fire polish all in one firing.
Low-Fire decals are ideal for work that needs the decal, but you don’t want it to lose it’s shape in the firing. Items such as plates, bowls, vases or other more dimensional work would be best with a Low-Fire decal because the firing temperature is low enough that the glass won’t lose its shape.
Whichever you use, the firing schedules for both types of decals are below full fuse temperatures, which means you can use the one that best suits your project.


Do you offer colours other than black and white?
Absolutely! We’ve found black and white to be the most useful and popular colours for decals, so these are part of our main line, however, we can definitely provide decals in any colour including silver and gold. We are happy to take requests and provide quotes to suit your needs.


Can I fire the decals between two layers and ‘cap’ them?
Technically, yes, you could, but if you want perfect clean results the decals should be your LAST firing and go onto your finished piece. You are always encouraged to experiment with new ways to combine glass working techniques and inclusions, but if you attempt to case decals in between layers of glass, the finer lines are likely to break apart creating a more worn-out, antique look. If you plan to attempt this, you must use the high-fire decals, and properly fire your decal onto the bottom layer of glass first. Then you can do a second firing to cap it with the second layer. If you attempt to do this all in one step, you will end up with a mess as the decal medium may not have enough air space or heat to burn off properly before the glass fuses, and will likely create an air bubble in the piece.


The decals rubbed off, what happened?
If your decals rub off or blow away like powder after firing, they have not been fired long enough! Check your kiln settings to see if your kiln is going to a high enough temperature for the decals you are using. If so, you might need to hold the decals at their maturing temperature for a bit longer.

Why did I get blisters or cracks in my decal?
It is most likely that you over-fired your decals or held your hold time too long.


Why did I get “pinholes” in my decals after firing?
In this case, you probably didn’t get all the air bubbles out of the decals before firing. Be sure to take a paper towel and gently, but thoroughly, squeeze any excess water off the decal when applying. If you see any air bubbles at this point, use your damp paper towel or cloth and push them from the middle of the decal out toward the edges until they are all gone, then allow them to dry for 24 hours before firing. It is also very important to use clean water when applying your decals, as any tiny particles trapped under the decal could also cause pinholes.


Can I get online help?
You bet! Michelle has over 12 years of kiln glass experience and is here to help you achieve the best results you can! You can email her at info@glassfusingdecals.com as much as you need!


Do you sell wholesale?
Yes we do! Please contact Michelle with your wholesale inquiries and she will be happy to give you quotes and more information.


How do you ship the decals?
I ship the decals in their own separate pouches with protective waxed paper, all in a CD-sized rigid mailer via regular post. This keeps the cost of shipping down, whereas the next option up is around $20 (I felt this was ridiculous for any small to medium number of decals). This means there is no tracking number, and the decals may take between 7-15 days to arrive depending on your location within North America with respect to Toronto, Ontario in Canada where we are located. If you would prefer trackable shipping, or a rush order, please contact us before you make your purchase to make arrangements for that.


Thank you everyone for your support!
Michelle Prosek
Frequently asked questions about Glass Fusing Decals! If you have a question that isn’t covered here, please contact Michelle at info@glassfusingdecals.com and she will be happy to help you out.


What type of glass can Glass Fusing Decals be used on?
Our decals can be used on any glass surface, including glazed ceramics!
COE 90, 96 and 104 are the most common, but the only real criteria is that the glass or ceramics you are using can withstand the required firing temperatures for the decals. If they can, you’ll get beautiful crisp, clean decals every time.


What is the difference between High-Fire and Low-Fire decals?
High-Fire decals fire at a temperature of about 1420ºF, whereas Low-Fire decals fire at a temperature of about 1100ºF. Each temperature range has it’s own uses:
High-Fire decals might be used on smaller projects that have been cold-worked and need to go back in the kiln to be fire polished. This is ideal as you can fire out the decal and fire polish all in one firing.
Low-Fire decals are ideal for work that needs the decal, but you don’t want it to lose it’s shape in the firing. Items such as plates, bowls, vases or other more dimensional work would be best with a Low-Fire decal because the firing temperature is low enough that the glass won’t lose its shape.
Whichever you use, the firing schedules for both types of decals are below full fuse temperatures, which means you can use the one that best suits your project.


Do you offer colours other than black and white?
Absolutely! We’ve found black and white to be the most useful and popular colours for decals, so these are part of our main line, however, we can definitely provide decals in any colour including silver and gold. We are happy to take requests and provide quotes to suit your needs.


Can I fire the decals between two layers and ‘cap’ them?
Technically, yes, you could, but if you want perfect clean results the decals should be your LAST firing and go onto your finished piece. You are always encouraged to experiment with new ways to combine glass working techniques and inclusions, but if you attempt to case decals in between layers of glass, the finer lines are likely to break apart creating a more worn-out, antique look. If you plan to attempt this, you must use the high-fire decals, and properly fire your decal onto the bottom layer of glass first. Then you can do a second firing to cap it with the second layer. If you attempt to do this all in one step, you will end up with a mess as the decal medium may not have enough air space or heat to burn off properly before the glass fuses, and will likely create an air bubble in the piece.


The decals rubbed off, what happened?
If your decals rub off or blow away like powder after firing, they have not been fired long enough! Check your kiln settings to see if your kiln is going to a high enough temperature for the decals you are using. If so, you might need to hold the decals at their maturing temperature for a bit longer.

Why did I get blisters or cracks in my decal?
It is most likely that you over-fired your decals or held your hold time too long.


Why did I get “pinholes” in my decals after firing?
In this case, you probably didn’t get all the air bubbles out of the decals before firing. Be sure to take a paper towel and gently, but thoroughly, squeeze any excess water off the decal when applying. If you see any air bubbles at this point, use your damp paper towel or cloth and push them from the middle of the decal out toward the edges until they are all gone, then allow them to dry for 24 hours before firing. It is also very important to use clean water when applying your decals, as any tiny particles trapped under the decal could also cause pinholes.


Can I get online help?
You bet! Michelle has over 12 years of kiln glass experience and is here to help you achieve the best results you can! You can email her at info@glassfusingdecals.com as much as you need!


Do you sell wholesale?
Yes we do! Please contact Michelle with your wholesale inquiries and she will be happy to give you quotes and more information.


How do you ship the decals?
I ship the decals in their own separate pouches with protective waxed paper, all in a CD-sized rigid mailer via regular post. This keeps the cost of shipping down, whereas the next option up is around $20 (I felt this was ridiculous for any small to medium number of decals). This means there is no tracking number, and the decals may take between 7-15 days to arrive depending on your location within North America with respect to Toronto, Ontario in Canada where we are located. If you would prefer trackable shipping, or a rush order, please contact us before you make your purchase to make arrangements for that.


Thank you everyone for your support!
Michelle Prosek