Beadcomber Silk Screen - Paisley Silkscreen for Polymer clay, flat surfaces such as metal, Paper Crafts and DIY
Description
Artist handmade Silkscreens for your DIY and Crafting
Free Shipping to USA, Canada and International on all Silkscreens.
The design area of this silkscreen measures 3 1/4 x 3 7/8" plus border, with a Paisley design.
I had to edit my previous listing because it said "approx." 3x4 and actual total measurement is a little larger than that when considering width is larger than 3" and length slightly shorter than 4". While I could make this screen exactly 3x4, it would mean I'd have to stretch the design one way and then lining it up for the 'wash out' process is a bit difficult.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE:
THIS IS A SILKSCREEN, NOT AN OPEN CUT OUT STENCIL FOR TRACING, BUT A MESH. THE MESH MATERIAL HAS AN IMAGE EMBEDDED ALLOWING ONE TO PUSH PAINT THROUGH IT ONTO A SURFACE TO RECREATE THE IMAGE.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I develop these silkscreens from my own artwork. The screen can be used to add a light / fine texture to your polymer clay, or use it with paint and screen/squeegee the design onto various flat surfaced materials such as paper, fabric, metal, wood, polymer clay. It can be run through the pasta machine with polymer clay or use an acrylic hand roller. My "low relief stone rubbing" I have listed in my shop works with silkscreens. The "Friendship hand" is another but you can also use rubber stamps with that tutorial as it demos a 'faux ceramic' technique.
There are a variety of paints you can use with silkscreens, any medium to thick acrylic paint will work, the ones I tend to use are Jacquard, Jones Tones or Golden Acrylic Paints which have fine particles in the paint.
Screens are made to order, so please allow 2 - 3 days for me to get them made.
After using paints, you should gently wash the screen in warm water as soon as possible as dry paints are hard if not impossible to remove. Let screen dry before using again. Following this direction will extend the life of the screen over many uses.
NOTE: Included is a simple printout of instructions. ArmorAll (Automotive vinyl protector) is helpful as a release agent for use on polymer clay, or to condition the screen to make it last longer for such use, but is NOT necessary. Water can be used in lieu.
POLICIES including shipping info is located here:
https://www.etsy.com/ca/shop/Beadcomber?ref=seller-platform-mcnav#policies
Shipping is from the West Coast of Vancouver Island, BC, Canada.
For non-digital items, please allow for sufficient time for item/s to arrive. Mailing times vary depending on option chosen and on location. If you have questions, please contact me.
Free Shipping to USA, Canada and International on all Silkscreens.
The design area of this silkscreen measures 3 1/4 x 3 7/8" plus border, with a Paisley design.
I had to edit my previous listing because it said "approx." 3x4 and actual total measurement is a little larger than that when considering width is larger than 3" and length slightly shorter than 4". While I could make this screen exactly 3x4, it would mean I'd have to stretch the design one way and then lining it up for the 'wash out' process is a bit difficult.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE:
THIS IS A SILKSCREEN, NOT AN OPEN CUT OUT STENCIL FOR TRACING, BUT A MESH. THE MESH MATERIAL HAS AN IMAGE EMBEDDED ALLOWING ONE TO PUSH PAINT THROUGH IT ONTO A SURFACE TO RECREATE THE IMAGE.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I develop these silkscreens from my own artwork. The screen can be used to add a light / fine texture to your polymer clay, or use it with paint and screen/squeegee the design onto various flat surfaced materials such as paper, fabric, metal, wood, polymer clay. It can be run through the pasta machine with polymer clay or use an acrylic hand roller. My "low relief stone rubbing" I have listed in my shop works with silkscreens. The "Friendship hand" is another but you can also use rubber stamps with that tutorial as it demos a 'faux ceramic' technique.
There are a variety of paints you can use with silkscreens, any medium to thick acrylic paint will work, the ones I tend to use are Jacquard, Jones Tones or Golden Acrylic Paints which have fine particles in the paint.
Screens are made to order, so please allow 2 - 3 days for me to get them made.
After using paints, you should gently wash the screen in warm water as soon as possible as dry paints are hard if not impossible to remove. Let screen dry before using again. Following this direction will extend the life of the screen over many uses.
NOTE: Included is a simple printout of instructions. ArmorAll (Automotive vinyl protector) is helpful as a release agent for use on polymer clay, or to condition the screen to make it last longer for such use, but is NOT necessary. Water can be used in lieu.
POLICIES including shipping info is located here:
https://www.etsy.com/ca/shop/Beadcomber?ref=seller-platform-mcnav#policies
Shipping is from the West Coast of Vancouver Island, BC, Canada.
For non-digital items, please allow for sufficient time for item/s to arrive. Mailing times vary depending on option chosen and on location. If you have questions, please contact me.
Artist handmade Silkscreens for your DIY and Crafting
Free Shipping to USA, Canada and International on all Silkscreens.
The design area of this silkscreen measures 3 1/4 x 3 7/8" plus border, with a Paisley design.
I had to edit my previous listing because it said "approx." 3x4 and actual total measurement is a little larger than that when considering width is larger than 3" and length slightly shorter than 4". While I could make this screen exactly 3x4, it would mean I'd have to stretch the design one way and then lining it up for the 'wash out' process is a bit difficult.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE:
THIS IS A SILKSCREEN, NOT AN OPEN CUT OUT STENCIL FOR TRACING, BUT A MESH. THE MESH MATERIAL HAS AN IMAGE EMBEDDED ALLOWING ONE TO PUSH PAINT THROUGH IT ONTO A SURFACE TO RECREATE THE IMAGE.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I develop these silkscreens from my own artwork. The screen can be used to add a light / fine texture to your polymer clay, or use it with paint and screen/squeegee the design onto various flat surfaced materials such as paper, fabric, metal, wood, polymer clay. It can be run through the pasta machine with polymer clay or use an acrylic hand roller. My "low relief stone rubbing" I have listed in my shop works with silkscreens. The "Friendship hand" is another but you can also use rubber stamps with that tutorial as it demos a 'faux ceramic' technique.
There are a variety of paints you can use with silkscreens, any medium to thick acrylic paint will work, the ones I tend to use are Jacquard, Jones Tones or Golden Acrylic Paints which have fine particles in the paint.
Screens are made to order, so please allow 2 - 3 days for me to get them made.
After using paints, you should gently wash the screen in warm water as soon as possible as dry paints are hard if not impossible to remove. Let screen dry before using again. Following this direction will extend the life of the screen over many uses.
NOTE: Included is a simple printout of instructions. ArmorAll (Automotive vinyl protector) is helpful as a release agent for use on polymer clay, or to condition the screen to make it last longer for such use, but is NOT necessary. Water can be used in lieu.
POLICIES including shipping info is located here:
https://www.etsy.com/ca/shop/Beadcomber?ref=seller-platform-mcnav#policies
Shipping is from the West Coast of Vancouver Island, BC, Canada.
For non-digital items, please allow for sufficient time for item/s to arrive. Mailing times vary depending on option chosen and on location. If you have questions, please contact me.
Free Shipping to USA, Canada and International on all Silkscreens.
The design area of this silkscreen measures 3 1/4 x 3 7/8" plus border, with a Paisley design.
I had to edit my previous listing because it said "approx." 3x4 and actual total measurement is a little larger than that when considering width is larger than 3" and length slightly shorter than 4". While I could make this screen exactly 3x4, it would mean I'd have to stretch the design one way and then lining it up for the 'wash out' process is a bit difficult.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE:
THIS IS A SILKSCREEN, NOT AN OPEN CUT OUT STENCIL FOR TRACING, BUT A MESH. THE MESH MATERIAL HAS AN IMAGE EMBEDDED ALLOWING ONE TO PUSH PAINT THROUGH IT ONTO A SURFACE TO RECREATE THE IMAGE.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I develop these silkscreens from my own artwork. The screen can be used to add a light / fine texture to your polymer clay, or use it with paint and screen/squeegee the design onto various flat surfaced materials such as paper, fabric, metal, wood, polymer clay. It can be run through the pasta machine with polymer clay or use an acrylic hand roller. My "low relief stone rubbing" I have listed in my shop works with silkscreens. The "Friendship hand" is another but you can also use rubber stamps with that tutorial as it demos a 'faux ceramic' technique.
There are a variety of paints you can use with silkscreens, any medium to thick acrylic paint will work, the ones I tend to use are Jacquard, Jones Tones or Golden Acrylic Paints which have fine particles in the paint.
Screens are made to order, so please allow 2 - 3 days for me to get them made.
After using paints, you should gently wash the screen in warm water as soon as possible as dry paints are hard if not impossible to remove. Let screen dry before using again. Following this direction will extend the life of the screen over many uses.
NOTE: Included is a simple printout of instructions. ArmorAll (Automotive vinyl protector) is helpful as a release agent for use on polymer clay, or to condition the screen to make it last longer for such use, but is NOT necessary. Water can be used in lieu.
POLICIES including shipping info is located here:
https://www.etsy.com/ca/shop/Beadcomber?ref=seller-platform-mcnav#policies
Shipping is from the West Coast of Vancouver Island, BC, Canada.
For non-digital items, please allow for sufficient time for item/s to arrive. Mailing times vary depending on option chosen and on location. If you have questions, please contact me.
Reviews
(1,824)-
Reviewed by Linda Sinish5 out of 5 stars03 Dec, 2017
Paisley Silkscreen for Polymer clay, flat surfaces such as metal, Paper Crafts -
Reviewed by Leanna Hawkins5 out of 5 stars10 Nov, 2017Can't wait to try this cute little screen out. Great service & fast shipping.
Paisley Silkscreen for Polymer clay, flat surfaces such as metal, Paper Crafts
-
Reviewed by Chelsea Dapena5 out of 5 stars24 Oct, 2017These make gorgeous prints! Love using them. Thank you so much!
Paisley Silkscreen for Polymer clay, flat surfaces such as metal, Paper Crafts
-
Reviewed by Little Sweet Tweets5 out of 5 stars08 Oct, 2017Excellent design when it comes to making pendants and the like.
Paisley Silkscreen for Polymer clay, flat surfaces such as metal, Paper Crafts
Loading
Reviews aren’t loading right now. Try again later!
Payment options
Secure options
- Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
Returns & exchanges
I gladly accept exchanges
Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
I don't accept returns or cancellations
But please contact me if you have any problems with your order.
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
- Custom or personalised orders
- Perishable products (like food or flowers)
- Digital downloads
- Intimate items (for health/hygiene reasons)
- Items on sale
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
FAQs
It's up to the Buyer to make sure the address and name are correct, that they have someone at the address to accept mail and Seller is not responsible for misdirected mail when Customer chooses the cheapest shipping option which are Lettermail, Light Packet Air and Small Packet Air/Surface. This applies to Custom orders (which includes Silkscreens as they are made on an per order basis) and to Sale items as well.
There are some countries I will not ship to. This includes Mexico, Indonesia, Bahamas, South America, Africa, Caribbean, South Pacific, and Asia (except Japan).
Beadcomber Silk Screen - Paisley Silkscreen for Polymer clay, flat surfaces such as metal, Paper Crafts and DIY
Ask a question
Almost gone. There's only 1 left.
Almost gone. There's only 1 left.
Overview
- Handmade Supply
- Craft type: Bookbinding, Candle making, Card making & stationery, Paper stamping, Printing & printmaking
- Material: photopolymer
- Feedback: 1824 reviews
- Favourited by: 1256 people
-
Gift wrapping and message available
Details
Gift wrapping by Beadcomber
Gift box with card (your chosen text if any) To USA only. Not available for Canada or International because of Canada Post size limitations.
Shipping & returns
Get it fast! Ready to ship in 1–2 business days.
From Canada
There was a problem calculating your shipping. Please try again.
Sorry, this item doesn’t ship to Canada. Contact the shop to find out about available shipping options.
Exchanges accepted
Exceptions may apply.
See return policy
You may also like
- Listed on 12 Jul, 2018
- 1256 favourites
- Report this item to Etsy