Announcement    Materials List:

10 - 8’ x 4’ sheets polycarbonate for 16’ (8 sheets for 12’) corrugated actually 50” wide (overlap)
48 - @ 36’’ foam strips (36 for 12’)
525 - 1 1/2’ TEK Screws w/ washers or Metal roof screws (colored) (425 for 12’)
450 - 1/2” TEK screws w/ washers (side and gable end windows)
100 - #8 Teks for door window 1/2”
16 - 3” butt hinges for vents (12 for 12’)
5 lbs - 3 1/2” deck screw / 3lbs - 2” deck screws / 2lbs 1” deck screws”
20@ 2 1/2” 1/4’ carriage bolts
12 @ 3” 1/4” carriage bolts 12 washers and nuts ( 9 for 12’)
20@ 2 1/2” 1/4” carriage bolts (16 for 12’ - 16 washers and nuts)
12 L shaped 3” connector brackets (3 per corner)
STAIN of your choice BEHR clear is nice

Wood:
Pressure Treated for base of foundation:
2 @ 16’ (2 @ 12’ for 12’ gh)
2 @ 9’ same for 12’

Cedar Lumber:
4x4’s: 2 @ 16’ (or 2 @ 12’)
1 @ 12’ ( secondary rafters 1” x 3 1/2”)
2 @ 9’ (same for 12’)
5 @ 8’ ( 4 for 12’)

2x6’s: 2 @ 16’ (2 @ 12’)
1 @ 12’ (1 @ 10’)
14 @ 8’ (12 @ 8’) these piece are for the knee wall. You can also use smart panels and paint.

2x4’s: 12 @ 16’ (12 @ 12’ for 12’)
2 @ 14’ (same for 12’) door frame need to be straight
12 @ 12’ (10 for 12’) NOTE: 5 of these pieces are for the rafters. Make sure they are straight and only tight knots. Use each 12’ cut @ 6’ for color uniformity.

*save pieces over 20” for framing and trim. Keep your receipts to exchange or return.
*approximate, refer to the plans themselves. This list will give you a good idea of costs.