Vinyl Sticker Applikationsanleitung
Schritt 1: Reinigen Sie den Bereich gründlich mit Alkohol oder Seife und Wasser. Verwenden Sie Windex oder ähnliche Produkte nicht, da dies Rückstände hinterlässt, die verhindern, dass der Vinylaufkleber korrekt haftet.
Schritt 2: Bereiten Sie den Vinylaufkleber für die Anwendung vor, indem Sie einen Rakel oder eine Kreditkarte fest über das Übertragungsband auf der Vorderseite des Vinylaufklebers reiben. Dies entfernt alle Luftblasen, die sich möglicherweise gebildet haben, und lässt den Aufkleber am Transferband haften.
Schritt 3: Ziehen Sie das weiße Papier vom Vinylaufkleber ab. Wenn der Vinylaufkleber an der Rückseite haftet, ersetzen Sie langsam die Papierrückseite und wiederholen Sie Schritt 2.
Schritt 4: Senken Sie den Vinylaufkleber langsam auf die Oberfläche und reiben Sie ihn mit einem Rakel oder einer Kreditkarte fest ein.
Schritt 5: Ziehen Sie das Transferband langsam schräg ab. Achten Sie darauf, den Vinylaufkleber nicht von der Oberfläche zu ziehen. Wenn sich der Aufkleber von der Oberfläche entfernt, wiederholen Sie Schritt 4.
Vinyl Sticker Application Instructions
Step 1: Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the vinyl sticker from adhering correctly.
Step 2: Prepare the vinyl sticker for application by firmly rubbing a squeegee or credit card across the transfer tape on the front side of the vinyl sticker. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
Step 3: Peel the white paper backing off the vinyl sticker. If the vinyl sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Step 4: Slowly lower the vinyl sticker onto the surface and rub it in place firmly with a squeegee or credit card.
Step 5: Slowly peel the transfer tape off at an angle. Be careful not to pull the vinyl sticker off the surface. If sticker pulls away from the surface repeat Step 4.