Cosplay / Costume 24 Dragon Scales - Fabric Swatch with 24 Scales

Name: Cosplay / Costume 24 Dragon Scales - Fabric Swatch with 24 Scales
Brand: Bits3DandPieces
SKU: 674054235
Availability: InStock
Rating: 4.8 (283 reviews)

Bits3DandPieces

Primary color

Please select a color

Fabric

Please select a fabric

Quantity

You can only make an offer when buying a single item

Handmade

These dragon scale swatches are a perfect addition to any costume - for adults and children alike. The swatches make it easy to sew into a shirt, on a backpack, on gloves, or anything!

Each fabric swatch is about 7 inches by 9 inches with 24 dragon scales 3D printed into the fabric. (Check out our other listing with 51 scales per swatch.) The scales measure 21.545mm (0.84 inch) high, 36.104mm (1.4 inches) deep from the tip of the scale to the back of the scale, and 21.959mm (0.86 inch) wide across the base of the scale and are centered within the 7 x 10 inch fabric. Order as many swatches necessary to create the perfect costume.

Scales are 3D printed in your color choice with rigid biodegradable PLA filament on off-white mesh fabric with larger pores in the fabric, or black or orange tulle fabric with smaller pores. The scales can be painted with acrylic paints.

Dragon Scales are designed by ShoreyDesigns and is licensed under the Creative Commons - Attribution license (https://www.thingiverse.com/thing:2755451) and printed by Bits 3D and Pieces.

Ships out within 2–3 weeks
Returns & exchanges not accepted
Cost to ship: 148.11 DKK

There was a problem calculating your shipping. Please try again.

Country

Postal code

Please enter a valid postal code.

Ships from United States

Etsy Purchase Protection: Shop confidently on Etsy knowing if something goes wrong with an order, we'll make it right for all eligible purchases — see program terms

3D printed items are not heat-resistant. Although PLA plastic can withstand temperatures up to 140 degrees Fahrenheit (60 Celsius), it can become soft if put in dishwasher, hot water, or even left in a car on a warm day.

Wash 3D prints with a cloth of warm water and mild soap. Most prints are not water-tight.

If a part breaks, you can glue it back together with superglue, Loc-tite gel, epoxy, or any other glue safe for plastics.

3D printed items can be painted with acrylic paints or any other paints that are safe for plastic or PLA plastic. It is recommended that they are primed first. Use of model car paints or spray paint for plastics work well.

If you want to remove visible layer lines, you can sand prior to priming. If sanding removes the natural color from a print, it can sometimes be restored by rubbing olive oil on it. Note that most items are not completely solid and only have approximately a 1mm solid surface so be cautious to not sand down too many layers.