Apple TV VESA Mount | Apple TV Wall Mount | Fits most versions 1 - 4K! | Multiple colors available
Prijs:EUR 11.46+
Retouren en ruilingen worden geaccepteerd
Je kunt alleen een bod doen als je een enkel item koopt
Hoogtepunten
The ATV mount is a simple carriage that holds your Apple TV to the back of a flat-panel television using the VESA screw points, or for use as a wall mounted solution. The ATV remote can operate with either Bluetooth or Wi-Fi allowing for rear mounting.
This version fits MOST GENERATIONS OF APPLE TV! Fits the original version (1st generation), 2nd generation, 3rd generation, 4th generation, and the 4K Apple TV Gen 1 & 2 (does not fit Gen 3 Model number: A2843).
Two size versions of the mount are available:
Short model - A convenient depth that holds the ATV
Tall model - Holding more of the ATV allowing for a snug fit
Additional item needed (not included):
M8 screw with a 40mm depth (about an inch or longer)
Multiple colors available.
You may have to replace the existing screw on the back of your TV with a flat head version to allow the ATV to fit properly. My TV had a typical round head screw with a washer and spacer which extended too far into the interior of the mount. I'm not sure if the VESA screws included with TV are standard size, so you'll wanna check out what's going on with your TV first.
The footprint on the rear of the mount is as small as possible to allow for a little airflow and heat dispersion.
Printed in durable, earth-friendly PLA plastic in color of your choice.
Original design credit to artificialdata@Thingiverse: https://www.thingiverse.com/thing:1264244
This is a 3D-printed, plastic item. Due to variables inherent in the printing process, it may have blemishes, layer lines, and other defects and/or minor sharp, small pieces of plastic which can be harmful if not handled properly. Sharp/rough edges can typically be smoothed with a heat gun or hair dryer, lightly softening the plastic then smoothing with a finger or other object.
That said, we work very hard to ensure that each item has a certain standard of quality. Please let us know if something is not up to snuff and we'll do our best to fix it!
-
Wordt binnen 5–7 werkdagen verstuurd
-
Retouren en ruilingen worden geaccepteerd binnen 7 dagen
Kopers zijn verantwoordelijk voor de verzendkosten van retouren. Als het item niet in oorspronkelijke staat teruggestuurd wordt, is de koper verantwoordelijk voor de vermindering in waarde.
-
Opgelet: dit item is mogelijk onderhevig aan nieuwe EU-douanekosten.
Voor bestellingen onder de EUR 150 die van buiten de EU worden verzonden, wordt er een toeslag van EUR 3 in rekening gebracht voor elk itemtype in de aankoop. Deze toeslag kan worden meegenomen in je verzendkosten of worden geïnd bij de levering. Vraag je verkoper om meer informatie over hoe je bestelling wordt verzonden.
-
Verzonden vanuit: Verenigde Staten
Dit item wordt niet naar België verzonden Neem contact op met de shop om meer te weten te komen over de beschikbare verzendmogelijkheden.
Er ging iets mis bij het berekenen van je verzendkosten. Probeer het nog eens.
Etsy's Aankoopbescherming
Shop met vertrouwen op Etsy wetende dat als er iets misgaat met een bestelling, dan helpen we je.
Lees hier de voorwaarden.
Recensies van dit item
This was for a set that is already wall mounted, so I didn't have a free VESA screw hole to use. Therefore it would have helped if the entire back surface sat flush with the TV - I'm using Gorilla Mounting Tape on the limited square that rises out. So far so good, though! Definitely not the product at fault, since I'm using it outside of its intended scope. It makes sense to save materials and only print it thick where it needs to be for the screw to hold tension.
Works great. Hooked it directly into one of the screw slots on the back of an LG 55”. Hides AppleTV and does the job.
Solid little holder for my ATV4K. For the newest ATV4K with Wi-Fi only, it’s got a little extra room as it’s slightly thinner.
Great product! Fast shipping.
Antwoord van Superhero DIY
Thanks for your great review!
Meer uit deze shop
Shop bezoeken-
Dry Erase Marker Holder | Wall Mount 4 or 8 Dry Erase Markers or similar size markers | Comes with command strip!
EUR 3.65
-
Kindle Bed Holder – Side Reading Stand for Kindle Paperwhite (Hands-Free Nightstand Stand)
EUR 23.17
-
Floating Shelf for Bitty Pop Bouquet
EUR 4.08
-
Foot Stands for Funko Pops | Stop them from falling over!
EUR 1.35
-
Apple TV Vesa-beugel | Home-accessoire Apple TV-organizer | Apple tv-beugel | Apple tv-muurbeugels | Sterke PETG-kunststof Apple tv-beugel
EUR 13.46
-
Apple TV 4K (3e generatie) beugel, muurbeugel, VESA-beugel
EUR 11.45
-
Apple TV 4K-muurbeugel | VESA-compatibele stalen houder 1e en 2e generatie | Thuisbioscoopopstelling
EUR 18.02
-
Achter tv-beugel voor Apple TV, VESA-adapter
Aanbiedingsprijs EUR 14.22
Oorspronkelijke prijs EUR 15.80
-
Digitale download
Apple TV 4K / HD VESA mount digitale kopie
EUR 3.16
-
Digitale download
Apple TV gen 2/3 VESA mount digitale kopie
EUR 3.16
-
Apple TV achterkant van tv VESA-montagebeugel
EUR 17.41
-
Wand- en tv-beugel voor Apple TV (2e-6e generatie en 4K)
EUR 11.28
-
Apple TV-rekmontage (modulair)
EUR 54.41
-
Muurbeugel voor Apple TV-afstandsbediening
EUR 10.17
-
Muurbeugel voor Apple TV 4K Gen1, 2 en 3
EUR 13.90
-
Apple TV 4K en HD: 1U rackmontage voor 19 personen (A1842, A1625)
EUR 34.99
Disclaimer: Etsy neemt geen verantwoordelijkheid voor de correctheid, de labeling of de inhoud van de listings en producten van verkopers. Bij elektrische of elektronische producten bestaat er een kans op brand of elektrocutie. Vintage, handgemaakte, omgebouwde of aangepaste elektrische of elektronische producten kunnen wellicht niet voldoen aan de huidige veiligheidsnormen en kunnen bij gebruik onveilig zijn. Inspecteer voor gebruik de items zorgvuldig en stuur de verkoper een bericht als je vragen hebt over het product. Gebruik vintage elektrische of elektronische niet als de veiligheid niet gecontroleerd kan worden. Om de kans op brand tot een minimum te beperken, gebruik je aangesloten vintage elektrische of elektronische producten nooit zonder toezicht. Bekijk Etsy's Gebruiksvoorwaarden voor meer informatie.
Populair bij shoppers met een vergelijkbare stijl
-
Milwaukee M12 battery and tool hangers (10 pack)
EUR 24.83
-
2-in-1 gereedschaps-/batterijwandmontage voor Milwaukee M12 | Dubbele en driedubbele bevestigingen
EUR 15.79
-
MOUNT for M12-M18 Combo Milwaukee Super Charger w/TOP CLAMP- Model #48-59-1811
EUR 22.03
-
Milwaukee M12 Battery Holder: Wall Mount Organizer
EUR 28.22
-
Milwaukee Tool M12 Battery Holder Mount Rack
EUR 15.80
-
3D-Printed Milwaukee M12 Tool Holder – Compact, Secure, and Built to Last
EUR 5.64
-
3D-geprinte boorhouder met onderbord: gereedschapsopberger
Aanbiedingsprijs EUR 9.35
Oorspronkelijke prijs EUR 11.68
-
Digitale download
Pegboard-gereedschapshanger STL-set: 3D-printerbestanden (digitale download)
EUR 2.26
-
IKEA SKADIS Verfhouder voor ProAcryl 22 ml | Acrylverfopberger voor monumentenhobby's | Displayrek voor montage op ophangbord
EUR 4.30
-
Ophangbord houder telefoon/tablet: workshopopberger, standaard of Skadis ophangbord, verkrijgbaar in gereedschapskleuren
Aanbiedingsprijs EUR 12.11
Oorspronkelijke prijs EUR 13.46
-
Pegboard Driver Bit Holder 1/4" for 30 Bits
EUR 15.79
-
3D-geprinte zeskantige bithouder voor ophangbord, schroevendraaierbithouder (1-inch, IKEA Skadis)
EUR 4.19