Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

You don't have any treasuries yet. Enter a title below to create one.

This item has been added.

View your treasury.
Bicycle Rack Reclaimed Wood and Recycled Bicycle Parts Bicycle Accessories

Sorry, this item sold. Have Winterwomandesigns make something just for you, or try these other items:

Like this item?

Add it to your favorites to revisit it later.
Request a custom order and have something made just for you.
Recycled Bicycle Parts Rack made with Reclaimed Wood

The wheel rims left over after I took off all the spokes & spoke nipples were beginning to pile up, so I had to come up with something to do with them! Well, what I've done is to turn them into a sharp looking way to hang your bicycle, all made from recycled wheel rims, spokes and reclaimed wood.

The cradle & horizontal slats are oak from leftover flooring rescued from the debris dumpster at a new house construction site. The vertical slats are mahogany (I think) also rescued from the debris dumpster at a new house construction site.

The cradle is lined with brown leather. The mahogany slats and oak cradle have been sanded smooth and given 3 coats of teak oil, then hand rubbed to a soft luster. The horizontal oak slats still have their factory finish.

The rack is 18" wide by 15 3/4" high. The projection is 14 3/4" from the wall to the outer edge of the top tube cradle. The projection is 13 1/2" on center of the cradle. The cradle is 13 1/2" long.
The holes for the mounting screws are 16" on center so you can mount the rack into the wall studs. (You will want to mount this into wood.)
This this rack can hold 30 lbs. The rims are attached at the bottom with both a bolt and a screw, and the spoke supports run through the wood and out the back where they are anchored securely.

To make sure your bike will fit and the handle bars won't hit the wall, measure from the center of the handle bars out to the end of the grip. If it is less than 13 3/4", it will fit. Also measure the length of the top tube (the under part) to be sure there is room for it to rest comfortably in the cradle. Please take note of the angles where the top tube meets the down tube & seat tube. If your top tube measures close to the 13 1/2" and the angles are sharp, it might not fit.

The bike parts are used and do show signs of wear.
The rack pictured with the bike is not the one for sale, I'm just using the same photo over & over so you can see the rack in action, and so I don't have lug my bike up from downstairs each time I make a new rack.

The shipping cost is per rack. This will ship through the US Postal Service. If you are outside the USA, please let me know where, and I can let you know the shipping cost.

Bicycle Rack Reclaimed Wood and Recycled Bicycle Parts Bicycle Accessories


  • Handmade item
  • Materials: oak, mahogany, teak oil, stainless steel, brass, aluminum
  • Only ships to United States from New Hampshire, United States.
  • Feedback: 261 reviews
  • Favorited by: 103 people