Epoxy Dininig Table Mold 60” x 30” - 153 cm x 76,5cm HDPE Resin Casting Junior reusable mould woodworker gift father day

Professional HDPE epoxy resin mold for river tables, dining tables, large countertops and statement furniture pieces.

Size: 60" x 30" (153 cm x 76.5 cm) — the perfect 5-foot mold that seats 6 people, fits every workshop, and ships affordably to 60+ countries.

This is the most versatile size in our large mold range. Big enoughfor a full dining table, compact enough to handle solo in the workshop,and wide enough at 30" for a proper, comfortable table surface.

Built with 12 mm HDPE — our thickest standard wall — for absolute rigidity and a guaranteed flat base on every single pour.

The choice of professionals who want quality results without the logistics challenges of our Giant 95" series.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHY HDPE BEATS SILICONE — EVERY SINGLE TIME
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✓ Perfectly flat base — no warping, no bowing, no wavy surfaces
✓ 12 mm thick HDPE walls — maximum rigidity for heavy, large-volume pours
✓ 100% reusable — hundreds of pours without degradation or discoloration
✓ Non-stick surface — epoxy releases cleanly every time, zero tearing
✓ Dimensionally stable — holds exact 60"x30" size pour after pour
✓ Rigid under load — won't flex even with the heaviest epoxy pours
✓ 2 built-in spirit levels — your pour is always perfectly level
✓ Easy to clean — wipe down and ready for the next project in minutes

Silicone molds at 60 inches flex dramatically under the weight of a full epoxy pour — you end up with a bowed base that needs hours of grinding and sanding before you can even start finishing. Our 12 mm HDPE holds its shape perfectly every time.
That's why professionals choose HDPE. Every time.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PERFECT FOR
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- River table tops — live edge wood with epoxy river channel, seats 6
- Full 5-foot dining table tops for kitchens and living spaces
- Large kitchen countertops and breakfast bar surfaces
- Home office and executive desk tops
- Restaurant and café table tops
- Epoxy bar tops for home bars and entertainment rooms
- Epoxy and wood slab furniture for interior designers
- Custom furniture commissions for professional woodworkers
- Large decorative wall panels and showroom display pieces

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
SPECIFICATIONS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- Material: HDPE (High Density Polyethylene) — 12 mm thick walls and base
- Inner dimensions: 60.24" x 30.12" x 2.68" (153 cm x 76,5 cm x 6.8 cm)
- Wall height: 2.68" (68 mm)
- Weight: approx. 16 kg
- Includes: 2 bubble levels, assembly screws
- Requires: silicone sealant before each pour (pour after 2–3 days)
- Ships from: Kraków area, Poland
- Delivery: 60+ countries worldwide

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

HOW TO USE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
1. Place the mold on a flat, stable surface — trestle stands recommended
2. Use both built-in spirit levels to confirm perfectly level in all directions
3. Seal all inner joints with silicone sealant
4. Wait 2–3 days for the silicone to cure fully before pouring
5. Position your live edge wood slabs, inserts or objects inside
6. Pour your epoxy resin in layers (max 2–3 cm per layer)
7. After full cure, release your perfectly flat table top

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PRO TIPS FOR LARGE POURS AT THIS SIZE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
★ Always pour in layers — max 2–3 cm per layer to control heat buildup
★ Control temperature — epoxy cures best between 18–24°C (64–75°F)
★ Support the mold at both ends and in the centre with solid trestle legs
★ Check level again after placing wood — heavy live edge slabs can shift
★ For river table pours, clamp your wood slabs to the mold sides to prevent floating when you pour the epoxy river channel
★ This mold is manageable solo — one person can set it up and pour without assistance, unlike our 84" and 95" series
★ Sand the cured surface from 120 grit up to 3000 for a glass finish

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

ABOUT EPOXY PROJECTS AND MOLDS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
One of Europe's largest manufacturers of HDPE epoxy resin molds.
★ Rated 4.9 / 5 stars on Etsy — the highest-rated HDPE mold seller in the world
★ Star Seller badge on Etsy — maintained for multiple months in a row
★ 97% of customers rate us 5 out of 5 stars
★ All molds handmade in Kraków area, Poland
★ Ships reliably to 60+ countries worldwide
★ Registered trademark: Patent Office of Poland, No. 533768
★ This product is registered under the code GTIN 5904335576962


"Super pleased with item and service. Item arrived in a matter of days, faster than I've received items from the UK. The mold looks to be very well made with quality materials. Came well packaged with good instructions. I will definitely be using this company again without hesitation."
— Verified Etsy Buyer ★★★★★

Need a size between 60" and 70", or a custom width or length?
We manufacture molds to any dimensions — custom orders always welcome.
Contact us with your exact measurements and we'll build it for you.

Shop: hdpemolds.company.site
Etsy: epoxyprojectsmolds.etsy.com


See how easy is to remove epoxy resin casting from HDPE mold:
https://youtu.be/BA2wf0UYH5A?si=qrcDe0TC_FzqftGY

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NON EU MEMBERS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Buyers are responsible for any tariffs, duties and fees that may apply***.

*** If you are from outside the European Union, please be aware that some governments impose an import tax on the final recipient. If you are from Canada or the UK, please check that your government does not add an additional import charge which you will be responsible for covering before purchasing. Learn more about it: https://www.fedex.com/en-pl/billing/duty-tax.html#...