Aeon Laser Mira 9 90w Lightburn Cut Library! All the settings already premade for you! No more guessing! One click download.

This is a PREMADE library for materials for the Aeon Laser Mira 9 90W. Mira 9 comes in a few different powers. Mine is based off of a 90w. This fille will get you close if you have a 80w or 100w, and depending on age and use your tube power could be different.

This allows you to take the guess work out of finding the right settings for your Mira 9! No more wondering what speeds and power, dpi, etc. to start with!

Follow me on YouTube: https://www.youtube.com/myerswoodshop for laser video how tos and projects!

This is an instant digital download! You must 'load' the file iin the 'library' tab of Lightburn.

Has the following materials:
Acrylic
Birch Plywood
Cardboard
Doormat
Hardboard
Leather
MDF
Oak
Pine (Craft)
Pumpkin Pie
Yeti Powder Coat

Lightburn's Material Library provides a way to store and organize lots of presets for different operations on different materials, and have a way to quickly apply them. This is entirely user-generated - You set up a cut layer however you like and save it to a Library. You set a material type, thickness (if appropriate), and a short description.

HOW TO INSTALL:
This is a .zipped (compressed) file. You will need to unzip (decompress) it before importing into Lightburn. (On some computers (especially macs) it may automatically unzip upon download and leave you with the correct mira9cutlibary.clb)
then open Lightburn
then go to the 'library' tab in the bottom right near the 'laser' tab.
then click 'load'
Select my unzipped mira9cutlibrary.clb library file.
Done.
WILL NOT INSTALL IN THE TRIAL VERSIONS!

Here's a link to what it is and how to use the library.
https://lightburnsoftware.github.io/NewDocs/MaterialLibrary.html

*please note, this was made with a mira 9 with a 90w tube* These settings are made to get you close to final, but you should do your own work finding the correct settings for your machine.


*Last Update*
v2 - 12/4/21
v1 - 11/6/21