SandRack™ by RAB Tools : A Thought Out Sander Holder For Your Festool or Mirka Sanders (MFT Mounting Hardware Sold Separate)

Real quick...the MFT mounting hardware is sold separately as well is the RAB Rail™ MFT. No mounting hardware OR RAB Rail is included with this part. They are sold separately. Look towards the bottom of the dropdown menu for this listing and you will see the options there.

The SandRack™ is a thought out sander holder for you Festool ETS, ETSC, and Rotex sanders. It should work with the ETS version as well as those use the same sort of pads as the ETSC and Rotex sanders. I've always seen sander holders that engage on the pad of the sander but over time...gravity wins and the pad pulls away from the sander. We designed the SandRack™ with "wings" to engage on the plastic backing of the pad. The open bottom also allows the paper be free and not sit at the bottom of the holder. Please notice the 3 holes in the middle and the single one below the RAB logo...those are there in case you want to mount it to your WCR1000. The 2 outer most holes are there if you want to mount to a wall or side of your work bench.

The ETS-EC 125 version is currently under redesign and is NOT AVAILABLE AT THIS TIME.

The SandRack™ is not a tight fitting sander holder. Don't get us wrong...it'll hold your sander just fine..not gonna just fall out..but it was designed to work with or without an interface pad. That way you don't need 2 different SandRacks™ if you're going between using an interface pad and not.

**Also you can not use the SandRack with the edge guard attached to your sander.**

We recommend using #8 flathead screws to attach your SandRack™. The heads of the screw will sit below the surface of the part when installed properly.

MFT Hardware consists of...
(3) M4 Screws
(3) M4 T-Slot Nuts
**It's the 3rd to last option in this listing. Screws come in black and the t-slot nuts come in silver/chrome.**

We recommend using the 2 outer most holes and the center when mounting to the MFT.

Accessories are print-to-order. Supports are used for this part and there may be some signs of those on the part as the print on the top most layer. This will not affect the use of the part.

Please note that the names we added by the colors are intended to compliment that brand. They are not an identical color.

Sander and my left hand are not included...did we mention that the MFT mounting hardware and RAB Rail™ MFT are sold separate?

(Patent Pending)