Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

Like this item?

Add it to your favorites to revisit it later.
Request a custom order and have something made just for you.
Orgone Aluminium Mold / Mould Hexagonal Pyramid - Handmade

I have made this as a request. The mould is made from 1mm thick aluminium. The base is a hexagon and is 6 inches from point to point and stands 5 inches tall. The dimensions of each triangle face are as follows: base of triangle 75mm height of triangle 140mm Edges of the mould may be sharp so please take care.


One edge of the pyramid is not joined (see pic 4) and will need to be taped up when pouring the resin (i used parcel tape myself and this seems to work great as long as long as you tape up the tip properly as shown in picture 5.), In my experience I have found that this makes removal of the finished product from the mould much easier. Care must be taken when popping out the pyramid not to bend the sides of the mould too far. You only need to remove the tape and pull the side back gently and it should pop off.

A Little bit about me

While trying my hand at making some Orgone generating devices, I found it difficult to find a high quality mould that gave a good finish to the end product and did not stick to the resin when set. I started off using cardboard covered in tape for the mould, then plastic, then glass which all worked to varying degree's but didn't give the smooth finish I was looking for and they kept sticking to the finished pyramid. After much messing about I decided to make one myself from aluminium. These moulds give a smooth finish and do not stick as much to the pyramid (a little bit of force is required to pop them out but as long as care is taken the mould is perfectly re-usable many times over). I was so happy with the final product I thought I would create a few more in case anyone else was having the same problems as me.

I can make these in any shape or size so if you would like one custom made to your requirements please ask and I will list it for you.

I have been selling these on Ebay for a while now and they are quite popular. If you search for pyramid mould on ebay you should find my moulds and you can check out the feedback that other buyers have left.

Some of the pyramids may still have the blue protective layer on the inside to protect during shipping and this should be removed from the mould prior to using. It just peels off.

Please check out the crystals I have for sale as well. https://www.etsy.com/uk/shop/InfiniteOrgone?section_id=17013551&ref=shopsection_leftnav_1

Any questions please feel free to ask.

Regards Steve

Orgone Aluminium Hexagonal Pyramid Mold / Mould - Handmade

US$16.23
Please select from the available options

Overview