Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

Custom Wedding Ring, Engagement band, diamond jewelry - Hand forged stainless damascus steel ring - "Rocksteel" with diamond 1.7mm

Like this item?

Add it to your favorites to revisit it later.
Favorite
Request a custom order and have something made just for you.

Description

Custom Wedding Ring, Engagement band, diamond jewelry - Hand forged stainless damascus steel ring - "Rocksteel" with diamond 1.7mm

These rings are characterized by an uneven shape composed of many little areas and dents which look like a broken piece of rock.

Rings are without joints.

Diamond is certified. Cut crystal natural diamond 1.7 mm, round cut, color G-H, clarity VS - VS1, brilliant, unmodified
Another sizes of diamonds are possible on request (in our offer usually diamonds 1.5, 1.7, 2, 2.3, 2.7mm).

The ring without a diamond gem is listed here: https://www.etsy.com/listing/103156702/custom-wedding-ring-hand-forged

Damascus steel is a special type of steel which consists of many layers of two types of steel. It has properties similar to surgical steel or starsteel but it is enriched with unusual pattern which comes from etching. Damascus steel is durable, does not rust, does not cause allergies, and does not change color. In case of getting worn out, the structure can be restored again at any time. We offer lifetime service to all my jewelry.

This stainless steel is maintenance-free and keeps its design.

We offer lifelong service for free to every piece of jewelry (excluding shipping).

Dimensions: diameter, width 4 - 7mm - according to your requirements. If you want a ring wider than 7mm, we can make a special Etsy listing for you to purchase. If you are not sure about the ring size we strongly recommend not using string, paper strips and so on to measure. These methods are very inaccurate. The best method is to visit a jeweller's shop and ask the specialist to measure your fingers. It is important that the gauge you use has approximately the same width as your future ring as a thin ring sits and behaves completely differently than a wide ring. You can also send us a sample ring that fits you well and it will serve as a template.

Inner side of your ring can be engraved with a name, date, quote, etc. according to your wish. Engraving is offered in another listing. See all my products.

Another piece of jewelry can be made to your selected ring in the same design, for example, earrings, pendant, tie clip etc.

Photo is only illustrative (of already delivered rings) and individual rings may vary. Each ring has unique pattern, so no two rings are exactly alike.

The price is for 1 ring.
Not included any customs duty, VAT, importing fees in customers country. Shipping company usually collects this fees for local authority at delivery.

SHIPPING
1) UPS priority package - approximately $35
- full insurance, tracking
- this way of delivery takes approximately 1-2 weeks - it depends on the place of delivery (Europe, USA usually 1 week).
2) Czech post priority package - $11,
- this way of shipping is possible only to certain countries (most EU counries, Hong Kong, Japan, Morocco, Russia, Switzerland...)
- this way of delivery takes approximately 30 days (Europe 2 weeks) - it depends on the place of delivery and customs procedure in customers country.

If you would like shipping via Czech post priority package, just contact me before placing your order. I'll find out if the delivery to your country is possible and set up a new listing for you to purchase.

DELIVERY TIME – PLEASE, CHECK THE DELIVERY DATE BEFORE ORDER!!!
approximately 30

Rings will be sent in a gift box.

If you have decided for our ring, please write to your order following information:
1) ring size (diameter) , width 4-7mm
2) pattern - type of structure (circles, lines, wood) - please see the photo annex.
3) depth of etching (25-100%) - please see the photo annex.
4) The inner side of the ring can be etched or smooth. I recommend no etching of the inner side or max. 50%.
5) other requirements
6) date of wedding, engagement etc.
7) shipping address, phone number

Please read our policies before order.
Please contact us if you have any questions. Thanks.

Enter our shop here - http://www.etsy.com/shop/KREDUM?ref=si_shop
Custom Wedding Ring, Engagement band, diamond jewelry - Hand forged stainless damascus steel ring - "Rocksteel" with diamond 1.7mm

These rings are characterized by an uneven shape composed of many little areas and dents which look like a broken piece of rock.

Rings are without joints.

Diamond is certified. Cut crystal natural diamond 1.7 mm, round cut, color G-H, clarity VS - VS1, brilliant, unmodified
Another sizes of diamonds are possible on request (in our offer usually diamonds 1.5, 1.7, 2, 2.3, 2.7mm).

The ring without a diamond gem is listed here: https://www.etsy.com/listing/103156702/custom-wedding-ring-hand-forged

Damascus steel is a special type of steel which consists of many layers of two types of steel. It has properties similar to surgical steel or starsteel but it is enriched with unusual pattern which comes from etching. Damascus steel is durable, does not rust, does not cause allergies, and does not change color. In case of getting worn out, the structure can be restored again at any time. We offer lifetime service to all my jewelry.

This stainless steel is maintenance-free and keeps its design.

We offer lifelong service for free to every piece of jewelry (excluding shipping).

Dimensions: diameter, width 4 - 7mm - according to your requirements. If you want a ring wider than 7mm, we can make a special Etsy listing for you to purchase. If you are not sure about the ring size we strongly recommend not using string, paper strips and so on to measure. These methods are very inaccurate. The best method is to visit a jeweller's shop and ask the specialist to measure your fingers. It is important that the gauge you use has approximately the same width as your future ring as a thin ring sits and behaves completely differently than a wide ring. You can also send us a sample ring that fits you well and it will serve as a template.

Inner side of your ring can be engraved with a name, date, quote, etc. according to your wish. Engraving is offered in another listing. See all my products.

Another piece of jewelry can be made to your selected ring in the same design, for example, earrings, pendant, tie clip etc.

Photo is only illustrative (of already delivered rings) and individual rings may vary. Each ring has unique pattern, so no two rings are exactly alike.

The price is for 1 ring.
Not included any customs duty, VAT, importing fees in customers country. Shipping company usually collects this fees for local authority at delivery.

SHIPPING
1) UPS priority package - approximately $35
- full insurance, tracking
- this way of delivery takes approximately 1-2 weeks - it depends on the place of delivery (Europe, USA usually 1 week).
2) Czech post priority package - $11,
- this way of shipping is possible only to certain countries (most EU counries, Hong Kong, Japan, Morocco, Russia, Switzerland...)
- this way of delivery takes approximately 30 days (Europe 2 weeks) - it depends on the place of delivery and customs procedure in customers country.

If you would like shipping via Czech post priority package, just contact me before placing your order. I'll find out if the delivery to your country is possible and set up a new listing for you to purchase.

DELIVERY TIME – PLEASE, CHECK THE DELIVERY DATE BEFORE ORDER!!!
approximately 30

Rings will be sent in a gift box.

If you have decided for our ring, please write to your order following information:
1) ring size (diameter) , width 4-7mm
2) pattern - type of structure (circles, lines, wood) - please see the photo annex.
3) depth of etching (25-100%) - please see the photo annex.
4) The inner side of the ring can be etched or smooth. I recommend no etching of the inner side or max. 50%.
5) other requirements
6) date of wedding, engagement etc.
7) shipping address, phone number

Please read our policies before order.
Please contact us if you have any questions. Thanks.

Enter our shop here - http://www.etsy.com/shop/KREDUM?ref=si_shop

Reviews

5 out of 5 stars
(516)
Reviewed by Andrew
5 out of 5 stars
Apr 10, 2018
More beautiful than in the photo they look amazing the communication with them was good with all the details specified being done exactly as requested. Highly recommend it!
DIAMOND Wedding Band, Engagement band, DAMASCUS steel HANDMADE ring, ring for her, female band, womens band - Rocksteel" with diamond 1.5mm

Reviewed by Sarah Burge
5 out of 5 stars
May 25, 2018
Stunning and looks so much more expensive than it is, we're very please with our choice and my husband-to-be loves it.
DAMASCUS steel WEDDING band, Hand forged womens or mens ring, male or female band, mens or womens engagement band - Kasiopea steel

Reviewed by Jodie Johnson
5 out of 5 stars
May 21, 2018
The rings are so beautiful! We love them! They were so easy to work with to design the perfect ring set and communication was excellent. Thank you!
RESERVED LISTING - Titanium hand foreged band with a cut sapphire set into a piece of silver - Rocky with a cut sapphire

Payments

Secure options
  • Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
We accept PayPal as payment. PayPal is a secure online payment system and is very easy to use. You don't even have to have an account - you can simply pay with a credit card as you would on any other site. We will ship the item once we have received the payment and everything has cleared. If payment is not received, I reserve the right to cancel the transaction.

Any custom duty/tax is customer´s responsibility. The buyer is responsible for any fees or custom duties that the country of destination charges. Duty/tax can make in some countries 10-15% from value of your order. According to our experience dutiable goods are goods with value: 201 USD in USA, 263 USD in Autralia, 295 USD in New Zealand - (this is with no guaranty, this values can change anytime).

Some shipping companies (for example UPS) collects those fees on delivery for customers local duty/tax authorities. They charge some small brokerage fee.

Returns & exchanges

We can not be responsible for any damages that happen during transit. At the request, all shipments can be insured. Each product is hand-made to order and created specifically for you. Refund is possible by mutual agreement. Very personalized rings or rings in a very specific size (very big or small), can not be refunded.

Shipping policies

For more valuable items we use services of UPS. We use UPS express saver, every package is fully insured, with tracking. Delivery to most countries takes approximately 3-10 days. PLEASE, CONTACT ME BEFORE YOUR ORDER TO BE SURE, THAT YOUR ORDER WILL BE DELIVERED IN TIME.

Cheaper and slower way of shipping is priority mail using services of Czech post (price approximately $8). If you would like this way of shipping, just contact me before your order and I will create a new listing for you to purchase.

Please make sure, that your delivery address is correct. IN case of UPS shipping please write to your order also your phone contact. UPS will contact you if you are not avaiable for delivery. UPS makes three attempts to deliver the shipment, then sends the package back to us and charges us a large fee. In case of sending a new shipment to you or in case of cancellation of this not-accepted order we will have to charge this fee to you.

Additional policies

SALE
All orders are binding. By confirming the order the buyer confirms that he is familiar with our business, delivery and payment terms and accepts them.
After ordering via the Etsy web form, you will receive a message confirming receipt of order. We will send you an email when your item is ready for shipping. We usually send dome photos of finished item before shipping so you will be able to write us if you like it or not. If you will not like it, we can make some adjustment or make another item for you.

CANCELLING ORDER
The seller is entitled to refuse an order. This may be due a significant increase in material prices, unavailability of goods and other unpredictable factors. If this happens, the seller will immediately inform the buyer.

RUSH ORDERS ARE WELCOME
Terms for creating jewelry and shipping are set as the maximum. I can not affect the delivery time much, but creating the jewelry is often possible in shorter time, according to number of orders. If you tell me the required term (for example date of wedding) I will immediately tell you whether we can create the jewelry in time. I charge no extra fees for rush orders.

SERVICE
We offer lifetime service to all our rings and damascus steel jewelry.

WARRANTY
If defects appear on the goods the buyer must claim the warranty without delay. The warranty does not cover wear out during normal use. Warranty claims are handled within 30 days from the date of claim (excluding shipping), unless the seller and buyer agree on a longer period.

Warranty period for setting stones into our jewelry is 1 year. We pay a lot of attention to be sure that every stone holds tight on the jewel. Warranty does not cover loss of stone, in case of loss of the stone the customer has to buy a new one.

ENGRAVING SERVICES
Engraving is possible in special listings.We offer an engraving made by computer, or an engraving using templates or an engraving made by hand. We can engrave also pictures or fingerprints. The engraving is technically enabled only for ring of width 3-8mm. If you want ring engraved, I recommend depth of etching on inner side of the ring max. 50%.

SIZING
All our rings are made exactly to your requirements.
I am sorry to say that there is not any uniform methodology for ring sizes conversion and accoording to our experience different jewellers measure ring sizes differently. We work with an inner diameter or circumference in our production. We can also make the rings in US or UK sizes - in this case we use this conversion chart with sizes that corresponds to our measuring tools :

https://www.kredum.cz/files/clanky/tabulka-prepocet-velikosti-prstenu-eu-us-uk.pdf

If you want to be sure please write us your ring size measured as the inner diameter or circumference.
There is also possibility to order our test rings that we offer here: https://www.etsy.com/shop/KREDUM?ref=hdr_shop_menu§ion_id=21119393

Please note that because our rings are handmade, there can be some small margin in sizes - our margin for this handmade work is 0.2 mm.

If you are not sure about the size of your future ring, we strongly recommend not using the measure of string, paper strips and so on. These methods are very inaccurate. The best variant is to visit a jeweller's shop and ask the specialist to measure your fingers. It is important that the gauge, you use, has approximately the same width as your future ring. The thin ring sits and behaves completely differently than wide ring. In hot weather your fingers can be a little swollen so dofferent values can be measured than when it's cold.

We can make rings with standard flat inner side or with a comfort fit (rounded inner side). Comfort fit is recommended for wide rings. Rings with a comfor fit can be usually a little smaller then standard rings Please tell us if your ring size is determined by jeweler as a "comfort-fit" size.
If you order a wide ring with a standart (flat) inner side, then your ring size should be measured for wide rings.

If you have a ring that fits you well, but you don´t know its size, some jeweler or specialist can measure it with a tool called ring mandrel (measuring cone). Most jewelers use the leading edge of the ring (bottom edge of the ring when it is placed on a jewellers measuring cone) to determine the size, others use the middle of the ring. Please write us, what way your ring was measured.
We measure the ring size of the ring with a standard flat inner side on the leading edge. Wider rings with a standard profile or rings with a comfort fit are measured more in a center of the ring.

You can also send us sample ring that fit you well and it will serve as a template.

If we make an error and send you the wrong size, we'll promptly create a new ring in the correct size and cover any postage both ways.

We also offer test rings: https://www.etsy.com/shop/KREDUM?ref=hdr_shop_menu§ion_id=21119393
Test rings are highly recommended for rings with stones or gold line.

INCORRECT RING SIZE
if your new ring arrives and seems to be large or small, we suggest wearing it for some time. Different activities and temperatures throughout the day cause that our hands and fingers can be swollen sometimes, so it's normal to have a ring feel tight sometimes and loose other times.

(1) If you ordered your ring TOO SMALL, we can resize the original ring up to 1-2 Czech size (1/4 - 1/2 US size, 1/2 - 1 UK size) by stretching the ring or by grinding the inside. Customers have to pay only a price of shipping. Enlargement is FREE. Customers from non EU countries have sometimes to pay customs fee.
Please note that some types of rings can not be stretched (for example golden line, rings with stones, ..) - these rings can be resized up only by grindind the inside.

(2) If you ordered your ring TOO BIG, we can resize the original ring down a little (approx. 1/4 US size, 1/2 UK size) by pressing the ring. Sizing down by pressing is difficult, some changes after pressing can stay visible on the ring.
Customers have to pay only a price of shipping. Enlargement is FREE. Customers from non EU countries have sometimes to pay customs fee.
Please note that some types of rings can not be pressed (for example golden line, rings with stones, ..).

If the ring can not be resized, sometimes we can exchange the ring for another one (in case that the ring has standard sizes - not too big, not too small, not too wide,....)
In case that the ring can not be resized and we can not exchange it, we can offer some discount to make a new one.

PLEASE NOTE
Please note that because our items are handmade, there could be some small difference in required sizes (width and thickness) - our margin for error is 0.2 mm.

Please don't put rings with stones into hot watter (more than 75-80 degrees). The stone could be unstuck.

Any custom duty/tax is customer´s responsibility. The buyer is responsible for any fees or custom duties that the country of destination charges. Duty/tax can make in some countries 10-15% from value of your order. According to our experience dutiable goods are goods with value: 201 USD in USA, 263 USD in Australia, 295 USD in New Zealand - (this is with no guaranty, this values can change anytime).

Some shipping companies (for example UPS) collects those fees on delivery for customers local duty/tax authorities. They charge some small brokerage fee.

HALLMARKs
If there is gold or silver used in our jewelry and these metals exceed limits set by the Czech Assay Office then these jewels have to be marked with hallmarks. The list of hallmarks is here:
http://www.puncovniurad.cz/en/znacky.aspx
Our hallmark:
http://www.puncovniurad.cz/cz/zlatnik_znacka.aspx?Id=5974
SALE
All orders are binding. By confirming the order the buyer confirms that he is familiar with our business, delivery and payment terms and accepts them.
After ordering via the Etsy web form, you will receive a message confirming receipt of order. We will send you an email when your item is ready for shipping. We usually send dome photos of finished item before shipping so you will be able to write us if you like it or not. If you will not like it, we can make some adjustment or make another item for you.

CANCELLING ORDER
The seller is entitled to refuse an order. This may be due a significant increase in material prices, unavailability of goods and other unpredictable factors. If this happens, the seller will immediately inform the buyer.

RUSH ORDERS ARE WELCOME
Terms for creating jewelry and shipping are set as the maximum. I can not affect the delivery time much, but creating the jewelry is often possible in shorter time, according to number of orders. If you tell me the required term (for example date of wedding) I will immediately tell you whether we can create the jewelry in time. I charge no extra fees for rush orders.

SERVICE
We offer lifetime service to all our rings and damascus steel jewelry.

WARRANTY
If defects appear on the goods the buyer must claim the warranty without delay. The warranty does not cover wear out during normal use. Warranty claims are handled within 30 days from the date of claim (excluding shipping), unless the seller and buyer agree on a longer period.

Warranty period for setting stones into our jewelry is 1 year. We pay a lot of attention to be sure that every stone holds tight on the jewel. Warranty does not cover loss of stone, in case of loss of the stone the customer has to buy a new one.

ENGRAVING SERVICES
Engraving is possible in special listings.We offer an engraving made by computer, or an engraving using templates or an engraving made by hand. We can engrave also pictures or fingerprints. The engraving is technically enabled only for ring of width 3-8mm. If you want ring engraved, I recommend depth of etching on inner side of the ring max. 50%.

SIZING
All our rings are made exactly to your requirements.
I am sorry to say that there is not any uniform methodology for ring sizes conversion and accoording to our experience different jewellers measure ring sizes differently. We work with an inner diameter or circumference in our production. We can also make the rings in US or UK sizes - in this case we use this conversion chart with sizes that corresponds to our measuring tools :

https://www.kredum.cz/files/clanky/tabulka-prepocet-velikosti-prstenu-eu-us-uk.pdf

If you want to be sure please write us your ring size measured as the inner diameter or circumference.
There is also possibility to order our test rings that we offer here: https://www.etsy.com/shop/KREDUM?ref=hdr_shop_menu§ion_id=21119393

Please note that because our rings are handmade, there can be some small margin in sizes - our margin for this handmade work is 0.2 mm.

If you are not sure about the size of your future ring, we strongly recommend not using the measure of string, paper strips and so on. These methods are very inaccurate. The best variant is to visit a jeweller's shop and ask the specialist to measure your fingers. It is important that the gauge, you use, has approximately the same width as your future ring. The thin ring sits and behaves completely differently than wide ring. In hot weather your fingers can be a little swollen so dofferent values can be measured than when it's cold.

We can make rings with standard flat inner side or with a comfort fit (rounded inner side). Comfort fit is recommended for wide rings. Rings with a comfor fit can be usually a little smaller then standard rings Please tell us if your ring size is determined by jeweler as a "comfort-fit" size.
If you order a wide ring with a standart (flat) inner side, then your ring size should be measured for wide rings.

If you have a ring that fits you well, but you don´t know its size, some jeweler or specialist can measure it with a tool called ring mandrel (measuring cone). Most jewelers use the leading edge of the ring (bottom edge of the ring when it is placed on a jewellers measuring cone) to determine the size, others use the middle of the ring. Please write us, what way your ring was measured.
We measure the ring size of the ring with a standard flat inner side on the leading edge. Wider rings with a standard profile or rings with a comfort fit are measured more in a center of the ring.

You can also send us sample ring that fit you well and it will serve as a template.

If we make an error and send you the wrong size, we'll promptly create a new ring in the correct size and cover any postage both ways.

We also offer test rings: https://www.etsy.com/shop/KREDUM?ref=hdr_shop_menu§ion_id=21119393
Test rings are highly recommended for rings with stones or gold line.

INCORRECT RING SIZE
if your new ring arrives and seems to be large or small, we suggest wearing it for some time. Different activities and temperatures throughout the day cause that our hands and fingers can be swollen sometimes, so it's normal to have a ring feel tight sometimes and loose other times.

(1) If you ordered your ring TOO SMALL, we can resize the original ring up to 1-2 Czech size (1/4 - 1/2 US size, 1/2 - 1 UK size) by stretching the ring or by grinding the inside. Customers have to pay only a price of shipping. Enlargement is FREE. Customers from non EU countries have sometimes to pay customs fee.
Please note that some types of rings can not be stretched (for example golden line, rings with stones, ..) - these rings can be resized up only by grindind the inside.

(2) If you ordered your ring TOO BIG, we can resize the original ring down a little (approx. 1/4 US size, 1/2 UK size) by pressing the ring. Sizing down by pressing is difficult, some changes after pressing can stay visible on the ring.
Customers have to pay only a price of shipping. Enlargement is FREE. Customers from non EU countries have sometimes to pay customs fee.
Please note that some types of rings can not be pressed (for example golden line, rings with stones, ..).

If the ring can not be resized, sometimes we can exchange the ring for another one (in case that the ring has standard sizes - not too big, not too small, not too wide,....)
In case that the ring can not be resized and we can not exchange it, we can offer some discount to make a new one.

PLEASE NOTE
Please note that because our items are handmade, there could be some small difference in required sizes (width and thickness) - our margin for error is 0.2 mm.

Please don't put rings with stones into hot watter (more than 75-80 degrees). The stone could be unstuck.

Any custom duty/tax is customer´s responsibility. The buyer is responsible for any fees or custom duties that the country of destination charges. Duty/tax can make in some countries 10-15% from value of your order. According to our experience dutiable goods are goods with value: 201 USD in USA, 263 USD in Australia, 295 USD in New Zealand - (this is with no guaranty, this values can change anytime).

Some shipping companies (for example UPS) collects those fees on delivery for customers local duty/tax authorities. They charge some small brokerage fee.

HALLMARKs
If there is gold or silver used in our jewelry and these metals exceed limits set by the Czech Assay Office then these jewels have to be marked with hallmarks. The list of hallmarks is here:
http://www.puncovniurad.cz/en/znacky.aspx
Our hallmark:
http://www.puncovniurad.cz/cz/zlatnik_znacka.aspx?Id=5974

Custom Wedding Ring, Engagement band, diamond jewelry - Hand forged stainless damascus steel ring - "Rocksteel" with diamond 1.7mm

Ask a question
$398.00
Almost gone. There's only 3 left.

Overview

  • Handmade item
  • Can be personalized: Yes
  • Band color: Gray
  • Gemstone: Diamond
  • Made to order
  • Feedback: 516 reviews
  • Favorited by: 224 people
  • Gift message available

Shipping & returns

Made just for you. Ready to ship in 1–4 weeks.
From Czech Republic

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…