Leopard Gecko Digital .STL File for 3d Printing, Articulated Fidget Figure, Multicolor 3MF, Cute Flexi

*This is a DIGITAL DOWNLOAD, not a physical Print. If you want an already printed version, they are available to purchase from Authorized Sellers here on Etsy and on the web.
**Due to Etsy's digital file size limit, upon purchase you will get a PDF file that contains a Download Link to the purchased STL files.

I hope you enjoy my articulated Leopard Gecko lizard! He's my most flexible design to date. This model has hooked locking mechanisms on all four legs. Just slip the hooks into the upper legs, and give them a small twist to lock them in. This allows you to pin the legs to the body in different combinations for really cute propped up poses! Give it a try! Just like real Leopard Geckos, this model can wag his tail vertically in the air, for some extra fidgety fun!

Updated!... Multicolor 3mf file now included!

Here's a short video showing how the arm locks work: https://youtu.be/QM0dozGDUOc

Here is a quick video showing how to remove the Pre-Support and snap-fit the head onto the body: https://youtu.be/IIBjZ6EOQGE

PLEASE READ:
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To legally sell PRINTS of my designs, you can obtain authorization by joining the "Merchant" Tier of my Patreon or MMF Tribe:
https://www.patreon.com/matmire_makes
https://www.myminifactory.com/users/MatMireMakes?show=tribe

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!


3D PRINTING SETTINGS

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

Includes 4 STL files:
*Recommended:
- Body with Custom Brim: Print-in-Place, Brim geo is built in so no need to generate one. No Supports needed
- Head with Pre-Supports: Supports are already built into the model. No need to generate them!
- Multicolor 3MFs: Compatible with PrusaSlicer, Bambu Studio, Orca based slicers. (for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.)
- 10-20% Infill.
- 3 Walls.

*Good bed adhesion is a must for successful printing. If you find you are having adhesion issues, use a brim/raft or use the model variants with the custom brims built in. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

Scale to your liking! 100% creates a 10" model, so that will make it easy to scale it to your desired size. (80% = 8", 75% = 7.5", etc.) Depending on your printer tolerances, you should be able to print close to 60-65% before the joint function may start to become compromised. YMMV

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.