How do I put my track together?

1. Do not fit pieces together until you are sure you want them together! 2. Arrange pieces in alphabetic order, to make the track shape shown. (Ref. last photo) 3. Press connections together by hand on a hard surface like a table or floor (this will take some force). Sometimes trying one on top of the other will work better than the other way around. 4. Any connections not fully engaged (flush with each other) may be tapped with a rubber mallet while on a hard surface to bring them flush. 5. Take care handling assembled track, it will not appreciate being dropped! 6. Hang on the wall using double sided foam tape, 3m command strips, screws, nails.. etc. Hang from at least 4 evenly spaced points to spread out the weight.

What do I hang my track with?

Velcro type Command strips work best, use at least 4 of them spread out evenly around the track to support the weight. Some larger tracks may do better with a few extra strips. If the track needs to be removable for cleaning, the velcro type Command strips work great to allow that. Normal Command adhesive strips can also be used and will put the track flush against the wall, but may be tricky to remove. They can also be hung from nails or screws, but take care to support the track in at least 4 places. You can also drill thru the track on center and use black screws to mount it if desired, again in 4 places minimum. Do NOT use sticky tack, blue tack, etc.. It won't hold.

Custom and personalized orders

Yes, I can add custom or personalized text such as the track name as a separate 3d printed part for additional cost.

Can you make ______ track?

Yes - I can make any track, but it will take some time to design it, lay it out, and print it. If you need a track that I don't have listed, message me and I will look into it for you - unfortunately due to current time constraints I need to stick to big name tracks that are popular and will be purchased multiple times - sorry!

I put my track together wrong, how do I get it apart?

Very carefully! On a table, hang the joint over the edge of the table. Hold one piece down tightly on the table, and press down on the second piece - take care to only push straight down. This will take some force, just like when you put it together.

How hard is it to add LED backlight?

Its pretty easy - peel and stick. Getting it to curve is the hardest part, but not difficult. See photos/instructions in the LED listing for how to curve it. Takes about 30 mins if you are overly careful like I am. Do be sure to let the LED strip warm up to room temp before installing it so its nice and flexy and the adhesive can stick best. ...And the mounting brackets just clip onto the track!

Report this item to Etsy

Low in stock, only 2 left

Price:NZ$50.71

* Seller GST included (where applicable). Additional GST may be applied by Etsy at checkout

No Spill Locking Oil Funnel for Honda/Acura - Vented High Flow & Magnetic!

Name: No Spill Locking Oil Funnel for Honda/Acura - Vented High Flow & Magnetic!
Brand: 3dprintedracetracks
SKU: 1441976676
Price: 50.71 NZD
Availability: InStock
Rating: 5.0 (9 reviews)

3dprintedracetracks

You can only make an offer when buying a single item.

Highlights

Supplies for making crafts

Makes oil changes even easier and faster:

-Threads in so it can't flop around while pouring!
-Vented for max flow rate - dump that oil in as fast as you can!
-Anti-splashback design!
-High strength neodymium magnet integrated for storage on any steel surface with no mess!
-Lip holds oil jug to allow it to sit and fully drain after pouring!
"Fit perfect"

"Guys at the shop loved it. The fact that it is magnetic was the driving factor for the purchase. Nothing like wind blowing over your [standard plain jane] funnel as 6 qts of oil are being poured"
"It worked great for the ___ I used it on"
"The air vent straw works great"

Threads right into the oil cap opening in your valve cover, fits Honda, Acura, Nissan, Hyundai, Isuzu, Mazda, and Suzuki models listed below.

Based on a Gates #31109 oil fill cap, you can search and verify fitment here:

https://www.partsplus.com/catalog-2/itemdetail/gates/31109

Fits over 1000 vehicles, this is a limited interchange from Beck Arnley:

ACURA CL 1997-1999
ACURA INTEGRA 1986-2001
ACURA LEGEND 1986-1995
ACURA MDX 2001
ACURA NSX 1991-2001
ACURA RL 1996-1999
ACURA SLX 1996-1997
ACURA TL 1995-1999
ACURA VIGOR 1992-1994
FORD ESCORT 1991-1993
FORD EXPLORER 1991-1993
FORD PROBE 1990-1992
GEO METRO 1989
GEO TRACKER 1996-1997
HONDA S2000 1999-2009
HONDA ACCORD 1984-2005
HONDA CIVIC 1986-2012
HONDA CIVIC DEL SOL 1993-1997
HONDA CR-V 1997-2001
HONDA CRX 1988-1991
HONDA ODYSSEY 1995-2000
HONDA PASSPORT 1994-2000
HONDA PRELUDE 1984-2000
HYUNDAI ACCENT 2000-2005
HYUNDAI ELANTRA 2001-2005
HYUNDAI TIBURON 2004-2007
HYUNDAI TUCSON 2005
ISUZU AMIGO 2000
ISUZU I-MARK 1987-1989
ISUZU IMPULSE 1986-1988
ISUZU OASIS 1996-1997
ISUZU RODEO 1991-1999
ISUZU TROOPER 1988-2001
ISUZU VEHICROSS 1999-2001
KIA SEPHIA 2001
KIA SPECTRA 2001-2004
MAZDA B2300 1994-2003
MAZDA B2500 1998-2001
MAZDA B3000 1994-2000
MAZDA B4000 1994-2000
MAZDA MPV 2001-2002
MAZDA NAVAJO 1991-1994
MAZDA TRIBUTE 2002-2003
MERCURY TRACER 1991-1992
NISSAN 200SX 1977-1983
NISSAN 280Z 1975-1978
NISSAN 280ZX 1979-1983
NISSAN 510 1970-1981
NISSAN 520 PICKUP 1966-1968
NISSAN 521 PICKUP 1969-1972
NISSAN 610 1973-1976
NISSAN 620 PICKUP 1972-1979
NISSAN 710 1974-1977
NISSAN 720 PICKUP 1980-1986
NISSAN 810 1977-1981
NISSAN MAXIMA 1982-1984
NISSAN PULSAR NX 1983-1984
STERLING 825 1987-1988
STERLING 827 1989-1991
SUZUKI AERIO 2002-2005
SUZUKI ESTEEM 1995-2002
SUZUKI GRAND VITARA 1999-2008
SUZUKI SIDEKICK 1992-1998
SUZUKI SWIFT 1989-1991
SUZUKI VITARA 2001-2004
SUZUKI X-90 1996-1998
SUZUKI XL-7 2005

This funnel is awesome. Designed and 3d printed in Ohio, of PLA plastic. Color may vary depending on material availability- message me if this is important to you.

**Note: Printed from thermoplastic, so avoid high temperatures. A warm engine is fine, but if the engine is hot we recommend allowing it to cool enough that you can touch it (around 115 deg F).

Dispatches within 5–7 business days
Returns & exchanges not accepted
Sent from: United States

Sorry, this item doesn’t deliver to New Zealand. Contact the shop to find out about available delivery options.

There was a problem calculating your postage. Please try again.

Country

Post code

Please enter a valid post code.

Etsy Purchase Protection
Shop confidently on Etsy knowing if something goes wrong with an order, we've got your back for all eligible purchases — see programme terms

Etsy invests in climate solutions like electric trucks and carbon offsets for every delivery. See how