Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

Jumpring Tool, Jumprings Tool Ringinator(R), DIY, Craft Supplies, Chainmail Rings Cutting Blade, saw blades, jewelry jump ring making tools

Like this item?

Add it to your favorites to revisit it later.

Description

Jumpring Tool, Jumprings Tool Ringinator(R), DIY, Craft Supplies, Chainmail Rings Cutting Blade, saw blades, jewelry jump ring making tools

The Ringinator™(R) is our Registered Trademark 2010. All Rights Reserved.
All designs, work, photos, descriptions of listings and site content featured are Copyright ©2009-2017 M. LeMieux

Currently the Ringinator®™ ships in about two weeks.

The Ringinator® EZ is the solution for all your jump ring cutting needs. It is a simple and compact design almost anyone can use.

Also INCLUDED:

Drill speed controller.
Laser photo tachometer
Lubrication pump & filter.
Comes with one blade to get you started.

Some assembly required.

Note: Our 220v drill speed controllers have EU plugs. They will work in your country, but you may need a plug adapter.

If you are in the USA, pick the 120v option.

HOW THE RINGINATOR WORKS:
You can watch this video:
https://www.youtube.com/watch?v=fkLYe3fs-lU

------------------------------------------------------------------------------------------------------------------

What the Ringinator® does is, takes these long coils (like you see in the detail photo to the side) and using a precision jewelers saw slices them right down the center to create individual jump rings with perfectly flush ends. In any metal.

Features:

• Use an electric drill to power it. (Drill not included)
A built in bracket keeps it secure and completely hands free. All you have to do is plug the drill in to the speed controller, lock the trigger to "on", and then adjust the speed. The speed controller in effect replaces the trigger of the drill. So instead of adjusting the speed using the trigger, you plug the drill into the controller and use a knob. In combination with the included laser tachometer, you can get perfect repeatability in cuts over time.

• Exact speed control.
The key to quality is repeatability. To eliminate all guesswork we include a laser tachometer that will allow you to measure in real-time the exact RPM speed the drill is going, with the push of a button. Using the laser and the speed controller, you can get repeatable results time after time.

• Titanium!
You are not limited to only cutting soft metals like copper or aluminum. With the Ringinator® you can cut even the hardest of Stainless Steel, Titanium, and even challenging metals like Niobium or Argentium.

• Speed
You simply feed in coil after coil. As many as you want, in any length you want. Unlike other tools, you are not limited to one length coil; and you don't have to take half the tool apart between coils.

• No vibrations
Connecting a drill directly to the cutting shaft transfers any vibration from the drill directly to the blade, causing issues. We solved that using a custom flexible power coupler to attach the drill to the blade. This powers the cutting blade without transferring any vibrations from the drill.

• Cordless cutting
Hook up a cordless drill and cut rings anywhere you want! At shows, craft fairs, clubs, demonstrations, think of the possibilities. People love seeing stuff being made. (Note: The speed controller does not work with cordless drills.)

• Lubrication
Click to zoom in.Without lubrication the blade can get too hot. This heat causes the material to become soft and weld to the teeth. (See image at right) To cut metal you need to use constant lubrication. This keeps the blade cool, keeps the metal cool, and helps it cut faster.

The included low-flow pump provides a constant stream of coolant/lubricant directly to the blade. The blade sits inside an enclosure that has coolant constantly flowing into it. This keeps it submerged in lubricant at all times. Underneath is a small catch basin where the cutting dust and overflow fluid collect to settle; the fluid is then pumped again for re-use. Using a water soluble cutting oil works best. After all your rings are cut you can just rinse them with warm water and all the oil washes away; leaving you with clean ready to use rings.

Built in lubrication is another unique feature found only on the Ringinator®

Bonus: The lubrication system allows for almost 100% collection of the cutting dust. That means that when cutting precious metals, like silver and gold, you have next to no loss. Also, you can collect the cutting dust and sell it in small vials. This can earn you considerably more than you would get by simply returning it for re-smelting. Customers love that kind of stuff, and it is a great complimentary product.

• Small size
As we all know, no matter how big your studio is table space is always at a premium. The footprint of the Ringinator® EZ is very small, taking up a minimum of space. With the drill removed, it is also under 6" in height, so it is easy to store when not in use.

The Ringinator® is CNC machined out of aerospace grade 6061-T6 Aluminum.

The smallest coil that can cut is 22g wire with a 3/32"ID (total OD = 0.14" (3.5mm)). Unmodified, the largest it will cut is coils with a 2" OD (50mm). It will cut almost any thickness wire, in almost any material.

The blade guiding groove accomplishes the job of lining up the coil and supporting it while it is being cut by the blade, and is a unique feature available only on the Ringinator®.

If you use a lot of jump rings the Ringinator® pays for itself in a very short amount of time. No need to keep large amounts of different sizes on hand anymore. You just need to keep a small amount of wire in stock and your favorite size mandrels. A pound of 20 gauge high quality shiny stainless steel wire can be bought for as low as $10. That same pound in jump rings ordered from a Catalog, Website, or Bead Store, would cost you hundreds.

Also included is a drill speed controller, and a laser photo tachometer.

-----

Note: Our 220v drill speed controllers have British plugs. They will work in Australia and Europe, but you may need a plug adapter.

The Ringinator™(R) is our Registered Trademark 2010. All Rights Reserved.
All designs, work, photos, descriptions of listings and site content featured are Copyright ©2009-2017 M. LeMieux
Jumpring Tool, Jumprings Tool Ringinator(R), DIY, Craft Supplies, Chainmail Rings Cutting Blade, saw blades, jewelry jump ring making tools

The Ringinator™(R) is our Registered Trademark 2010. All Rights Reserved.
All designs, work, photos, descriptions of listings and site content featured are Copyright ©2009-2017 M. LeMieux

Currently the Ringinator®™ ships in about two weeks.

The Ringinator® EZ is the solution for all your jump ring cutting needs. It is a simple and compact design almost anyone can use.

Also INCLUDED:

Drill speed controller.
Laser photo tachometer
Lubrication pump & filter.
Comes with one blade to get you started.

Some assembly required.

Note: Our 220v drill speed controllers have EU plugs. They will work in your country, but you may need a plug adapter.

If you are in the USA, pick the 120v option.

HOW THE RINGINATOR WORKS:
You can watch this video:
https://www.youtube.com/watch?v=fkLYe3fs-lU

------------------------------------------------------------------------------------------------------------------

What the Ringinator® does is, takes these long coils (like you see in the detail photo to the side) and using a precision jewelers saw slices them right down the center to create individual jump rings with perfectly flush ends. In any metal.

Features:

• Use an electric drill to power it. (Drill not included)
A built in bracket keeps it secure and completely hands free. All you have to do is plug the drill in to the speed controller, lock the trigger to "on", and then adjust the speed. The speed controller in effect replaces the trigger of the drill. So instead of adjusting the speed using the trigger, you plug the drill into the controller and use a knob. In combination with the included laser tachometer, you can get perfect repeatability in cuts over time.

• Exact speed control.
The key to quality is repeatability. To eliminate all guesswork we include a laser tachometer that will allow you to measure in real-time the exact RPM speed the drill is going, with the push of a button. Using the laser and the speed controller, you can get repeatable results time after time.

• Titanium!
You are not limited to only cutting soft metals like copper or aluminum. With the Ringinator® you can cut even the hardest of Stainless Steel, Titanium, and even challenging metals like Niobium or Argentium.

• Speed
You simply feed in coil after coil. As many as you want, in any length you want. Unlike other tools, you are not limited to one length coil; and you don't have to take half the tool apart between coils.

• No vibrations
Connecting a drill directly to the cutting shaft transfers any vibration from the drill directly to the blade, causing issues. We solved that using a custom flexible power coupler to attach the drill to the blade. This powers the cutting blade without transferring any vibrations from the drill.

• Cordless cutting
Hook up a cordless drill and cut rings anywhere you want! At shows, craft fairs, clubs, demonstrations, think of the possibilities. People love seeing stuff being made. (Note: The speed controller does not work with cordless drills.)

• Lubrication
Click to zoom in.Without lubrication the blade can get too hot. This heat causes the material to become soft and weld to the teeth. (See image at right) To cut metal you need to use constant lubrication. This keeps the blade cool, keeps the metal cool, and helps it cut faster.

The included low-flow pump provides a constant stream of coolant/lubricant directly to the blade. The blade sits inside an enclosure that has coolant constantly flowing into it. This keeps it submerged in lubricant at all times. Underneath is a small catch basin where the cutting dust and overflow fluid collect to settle; the fluid is then pumped again for re-use. Using a water soluble cutting oil works best. After all your rings are cut you can just rinse them with warm water and all the oil washes away; leaving you with clean ready to use rings.

Built in lubrication is another unique feature found only on the Ringinator®

Bonus: The lubrication system allows for almost 100% collection of the cutting dust. That means that when cutting precious metals, like silver and gold, you have next to no loss. Also, you can collect the cutting dust and sell it in small vials. This can earn you considerably more than you would get by simply returning it for re-smelting. Customers love that kind of stuff, and it is a great complimentary product.

• Small size
As we all know, no matter how big your studio is table space is always at a premium. The footprint of the Ringinator® EZ is very small, taking up a minimum of space. With the drill removed, it is also under 6" in height, so it is easy to store when not in use.

The Ringinator® is CNC machined out of aerospace grade 6061-T6 Aluminum.

The smallest coil that can cut is 22g wire with a 3/32"ID (total OD = 0.14" (3.5mm)). Unmodified, the largest it will cut is coils with a 2" OD (50mm). It will cut almost any thickness wire, in almost any material.

The blade guiding groove accomplishes the job of lining up the coil and supporting it while it is being cut by the blade, and is a unique feature available only on the Ringinator®.

If you use a lot of jump rings the Ringinator® pays for itself in a very short amount of time. No need to keep large amounts of different sizes on hand anymore. You just need to keep a small amount of wire in stock and your favorite size mandrels. A pound of 20 gauge high quality shiny stainless steel wire can be bought for as low as $10. That same pound in jump rings ordered from a Catalog, Website, or Bead Store, would cost you hundreds.

Also included is a drill speed controller, and a laser photo tachometer.

-----

Note: Our 220v drill speed controllers have British plugs. They will work in Australia and Europe, but you may need a plug adapter.

The Ringinator™(R) is our Registered Trademark 2010. All Rights Reserved.
All designs, work, photos, descriptions of listings and site content featured are Copyright ©2009-2017 M. LeMieux

Reviews

0 out of 5 stars
(1)
Reviewed by Justin Klier
5 out of 5 stars
Oct 23, 2014
Well built, arrived swiftly, and good communication. I appreciate the hook up ;) I highly recommend this item.
Ringinator(R) Handmade Jump Ring Tool, DIY, Craft Supplies, Chainmail Rings Cutting Blade, saw blades, jewelry making tools

Payments

Secure options
  • Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
We accept ETSY Payments, Etsy gift cards, and Credit Cards with PayPal (which is easy to use as a guest, even if you don't have a PayPal account).
Items will be shipped as the listing specifies and once payment is received.

Returns & exchanges

If for any reason you are not happy with your purchase please contact us within 7 days of the receipt of your purchase, and we can do what we can to fix the problem (in the unlike case there is one!)

Shipping policies

All packages are shipped via USPS Priority Mail which includes tracking information.

Insurance is not included. To purchase additional insurance or upgrade your shipping to overnight please notify us in the “Message to Seller” during checkout and we will bill you separately. Items shipped without insurance or to an incorrect address is the responsibility of the buyer. 

If your Etsy address does not match your PayPal address, Items will be shipped to your Etsy address.

No refunds or credits will be given for items lost due to incorrect mailing address.



International delivery times may vary. Buyer is responsible for any customs fees or duties on international shipments. We cannot tell you if your country will charge you any fees / duty. Please contact your local Postal Authority.

Additional policies

Our other shop:
http://loopinloop.etsy.com

Jumpring Tool, Jumprings Tool Ringinator(R), DIY, Craft Supplies, Chainmail Rings Cutting Blade, saw blades, jewelry jump ring making tools

Ask a question
$498.00
Free shipping to United States
Almost gone. There's only 2 left.

Overview

  • Handmade Supply
  • Craft type: Jewelry making
  • Tools power source: Corded electric
  • Set: No
  • Material: aerospace grade 6061 T6 Aluminum
  • Feedback: 1 reviews
  • Favorited by: 36 people
  • Gift message available

Shipping & returns

Made just for you. Ready to ship in 3–4 weeks.
From United States

You may also like

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…