Clorinde Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing

This is a fan-made bundle of cosplay accessories based off Clorinde's official art and in game model from Genshin Impact. All of my models are always made from scratch by me.

--------------------------------------------------------------------
Due to etsy's upload limits, you will receive a google drive link with 1 zip folder that contains the 110 stl files:

1. The hat accessories which come separated as 2 identical large hat pins and the feather pin.

2. 2 identical gem earrings.

3. The coat accessories which come separated as 2 identical collar pins, 2 identical shoulder pads, the shoulder pad connector, 16 identical small diamonds, 2 identical small diamonds with no hole, 13 identical large diamonds, the front connector rope pin, the side connector rope pin, the back connector rope pin, the lower back rope large diamond, the lower back rope small diamond, the lower back rope gem and 2 identical large hanging pieces. The shoulder pad connector is separated into 2 parts that are designed to be glued together using their alignment pins as a guide. The whole model of the shoulder pad connector is also included.

4. The corset accessories which come separated as 4 identical buttons, 2 identical small pins, 2 identical side diamond pins and 2 identical side large pins.

5. 2 identical sets of arm accessories which come separated as 3 identical front pins, 3 identical back buttons and the hand pin.

6. 2 identical sets of thigh accessories which come separated as the large pin, 3 identical small diamonds, the small pin diamond and the smaller diamond.

7. The cloth accessories which come separated as 8 identical diamond beads.

8. 2 identical sets of boot accessories which come separated as the large pin, the front cover, the heel and 2 buttons. I highly recommend gluing the heel part onto the back of an actual heel as the model is not built to be walked on alone. The shape of this model will best fit on top of a stiletto heel that is around 11cm in height since that's precisely in proportion with the game model. If you'd like me to make an adjustment to it to fit your shoe please message me!

9. The Electro Fontaine (Ousia) vision which comes separated as the frame and core. The frame is pre-separated into 2 halves that are designed to be glued together using their alignment pins as a guide.

--------------------------------------------------------------------
General Filament Printer Settings Recommendation:

. A fine layer height of 0.1mm or less for a nice and smooth surface straight off of the print bed. (This helps to minimise time spent on post processing by sanding to obscure layer lines.)

. x3-5 walls at 0.8mm thickness for adequately durable model walls. (A model's main strength I find comes from the number of walls and not the infill density.)

. Infill at around 10% with gyroid or cubic pattern for a bit extra durability, or 5% lightning for a more lightweight model.

. Organic/tree supports at 45% overhang threshold and 0.2 detachable top z contact distance. (Overall they are much better in my experience than default style supports; With organic/tree supports, surface detail is better retained, they are much easier to remove, minimal marks are left behind after removal, and they tend to use less filament.)

--------------------------------------------------------------------
Other general recommendations:

. Try out the Overture brand of filament. Its more robust than other PLA brands I've tried out and prints very nicely.

. Try to print in the same main colour that the model is. Doing so will help you save paint since you won't have to apply so many layers to cover up the original random colour. Additionally, if the paint chips at least a similar enough colour will be underneath and won't look out of place. For golden or silver models, I recommend rather just printing with its matte equivalent such as yellow/orange and light blue/grey instead of actual metallic filament if you're going to paint over it as it'll save you a bit of money.

--------------------------------------------------------------------
Some things to consider:

. These models and split parts are designed to fit on a Prusa MK3S printer build volume of 25cm wide, 21cm deep, & 21cm high.

. I will be unable to provide the models in any file format other than .stl

. I typically provide the models in a default orientation which is often not at an optimal orientation to print considering various factors, please consider the orientation of the models and adjust them accordingly.

. Before printing your final parts, make sure to do a test print, double check that the generalised sizes are right for you and re-size if needed. If you decide to resize, make sure to scale all joining parts collectively so that they will fit together.

. Models that are pre-split into parts will likely have some degree of seam line depending on how accurately your printer prints the joining edges of the models, the pins, and the voids. If you encounter this, I recommend using some sort of filler, such as epoxy putty, to fill in the seam line and then sand everything well for smooth results.

--------------------------------------------------------------------
If you have any questions please do not hesitate to contact me using the "contact shop owner" button on my store page!

Feel free to also drop pics of your cosplays, I'd love to see what you make!

--------------------------------------------------------------------
Thanks for stopping by! I hope you enjoy!
--------------------------------------------------------------------