5-inch and 6-inch Sanding Disc Storage, multiple color choices, pad, disk, holder, sandpaper, orbital, 5", 6"

Available as a 5" or a 6" version. Eight compartments. Each compartment holds 20 to 40 discs (disc thickness varies), for a total of 160 to 320 discs/sheets.
Diablo discs are 0.4mm thick while I have some generic ones that are 0.8mm thick.

Can sit on a workbench, or be mounted to the wall or cabinet with #7 or #8 screws. There are four screw holes on the bottom, and four screw holes on the back. Mount flat on a work bench, horizontally on the wall, or rotate 90 degrees and mount on the wall.

Printed in PETG for extra durability and resistance to stains and heat.

New design for 2024. Streamlining the sides; increasing the wall strength, while reducing the chance of print defects. In my testing, the discs are not sticking to the discs in the adjoining compartments; but I'm now including optional dividers anyhow. With the dividers you can also store multiple grits in a single compartment. Great for grits that you only have ten of.
I am in the process of updating all the photos. The previous design may be reflected in some pictures to represent the color choices.

The 5" version is 8 7/8" wide by 4 7/8" deep and 4 7/8" tall.
The 6" version is 8 7/8" wide by 5 1/2" deep and 5 1/2" tall.
Each compartment is 1" wide.

You can place labels on the bottom front or the top, depending on your mounting preference. Transparent labels (of assorted grits) are included. You can also use the included dividers and write the grit on the divider's tab. The dividers are currently 3D printed in PLA, but may be replaced with card stock in the future.

I've tried to match the brand colors as closely as possible, but they are not an exact match.
Ryobi green (safety yellow)
Dewalt yellow
Milwaukee and Craftsman red
Ridgid orange
Makita blue
Porter-Cables gray

1/2" tall labels are included (just cut to size, remove backing, and apply). Grits: 24 30 36 40 50 60 80 100 120 150 180 220 240 320 360 400 
500 600 800 1000 1500 2000 2500 3000 5000 7000.

Note: These are 3D printed (my own exclusive design), minor color variations and surface defects may occur. Printed in PETG (rather than PLA). PETG filament exhibits high UV resistance, making it suited to applications for the outdoors and exposure to direct sunlight (reducing the chance of fading or warping).

Sand paper discs, power tools, mounting screws, etc. are not included.

Contact me for custom color requests.