8 oz Ball Peen Chasing Hammer, Peening Hammer, Dimpling Hammer, Metal Forming Tools, Hammered Edge and Dimpling hammer, jewelry tools

$14.95

Free shipping to United States
Please select a quantity

Item details

Materials

8 oz Ball Pein Hammer, 8 oz German Style Chasing Ball Peen Hammer

8 oz Ball Peen Chasing Hammer, Peening Hammer, Dimpling Hammer, Metal Forming Tools, Hammered Edge and Dimpling hammer, jewelry tools

Chasing Ball peen Hammer is used to work harden and make dimples, textures and hammered edges on blanks, wire and sheet metals: aluminum, nickel, brass, copper, alkeme, pewter, gold, etc. Also used to distress wood.

German Style chasing hammer has a flat face rather than a domed face.

Used to shape, form, texturize, stretch or flatten wire, discs, blanks and sheet metal; also used for wood working and household projects.

TOOLS: bench blocks, hole punches, bead spinners, polishing and soldering tools, etc:

http://www.etsy.com/shop/ArtJewelryBeadsNMore?section_id=11792516

I ship within 24 hours of receipt of confirmation of payment.

Thank you for shopping ArtJewelryBeadsNMore

**********************************************************************

Metalsmithing facts:

(Originally published in Lapidary Journal Jewelry Artist April 2010.)

Moving, Stretching, and Fold-Forming Metal
"Steel makes jewelry metal move better, stronger, and faster than anything else." Use a steel block under metal when stamping, texturing, or forming.

Stretch or move? "There are two basic ways to form metal: you can stretch or compress it by deformation, or you can move it without deforming it. Anvils and blocks are usually wood, plastic, or steel, and you can use steel, wood, hide, or plastic striking tools (hammers, punches, or blocks) with them." To help you figure out which combination of tools will help you achieve the results you want, remember these two rules: steel + steel = stretch, and steel + wood, plastic, or hide = move.

"Metal will generally take the shape of whatever the harder surface is." If you strike metal on a wood block with a steel hammer, that metal will typically curl up toward the hammer.
Do the opposite: Strike curled metal on a steel block with a rawhide, wood, or plastic mallet, and the curled metal will flatten toward the steel.

Consequently, "If you strike a flat piece of annealed metal with a steel hammer on a flat steel block, the metal will move away from the hammer without curling up, depending on the shape of its face. The force of the strike and the shape of the hammer face determine how far and deep the metal moves."

"You can gently refine a curve or cupped form in metal without stretching it by using a flat wood block and a curved wood or plastic hammer on the inside of the curve or cup."
8 oz Ball Peen Chasing Hammer, Peening Hammer, Dimpling Hammer, Metal Forming Tools, Hammered Edge and Dimpling hammer, jewelry tools

Chasing Ball peen Hammer is used to work harden and make dimples, textures and hammered edges on blanks, wire and sheet metals: aluminum, nickel, brass, copper, alkeme, pewter, gold, etc. Also used to distress wood.

German Style chasing hammer has a flat face rather than a domed face.

Used to shape, form, texturize, stretch or flatten wire, discs, blanks and sheet metal; also used for wood working and household projects.

TOOLS: bench blocks, hole punches, bead spinners, polishing and soldering tools, etc:

http://www.etsy.com/shop/ArtJewelryBeadsNMore?section_id=11792516

I ship within 24 hours of receipt of confirmation of payment.

Thank you for shopping ArtJewelryBeadsNMore

**********************************************************************

Metalsmithing facts:

(Originally published in Lapidary Journal Jewelry Artist April 2010.)

Moving, Stretching, and Fold-Forming Metal
"Steel makes jewelry metal move better, stronger, and faster than anything else." Use a steel block under metal when stamping, texturing, or forming.

Stretch or move? "There are two basic ways to form metal: you can stretch or compress it by deformation, or you can move it without deforming it. Anvils and blocks are usually wood, plastic, or steel, and you can use steel, wood, hide, or plastic striking tools (hammers, punches, or blocks) with them." To help you figure out which combination of tools will help you achieve the results you want, remember these two rules: steel + steel = stretch, and steel + wood, plastic, or hide = move.

"Metal will generally take the shape of whatever the harder surface is." If you strike metal on a wood block with a steel hammer, that metal will typically curl up toward the hammer.
Do the opposite: Strike curled metal on a steel block with a rawhide, wood, or plastic mallet, and the curled metal will flatten toward the steel.

Consequently, "If you strike a flat piece of annealed metal with a steel hammer on a flat steel block, the metal will move away from the hammer without curling up, depending on the shape of its face. The force of the strike and the shape of the hammer face determine how far and deep the metal moves."

"You can gently refine a curve or cupped form in metal without stretching it by using a flat wood block and a curved wood or plastic hammer on the inside of the curve or cup."

Shipping & returns

Get it fast! Ready to ship in 1 business day.
From United States
Free shipping to United States
Shipping upgrades available in the cart
Exchanges accepted
Exceptions may apply.

Meet ArtJewelryBeadsNMore

Strawberryfieldsnj

Strawberryfieldsnj

Port Richey, Florida

This seller usually responds within a few hours.

Reviews

5 out of 5 stars (9,002)

You may also like