HAP - Eurorack Bernoulli/AND gate logic module

**15% OFF PRE-ORDER PRICE. FREE PACK OF CABLES OR 1U PASSIVE MULT WITH EVERY ORDER. 2-10 WEEKS SHIPPING DEPENDING ON ORDER AMOUNTS**

Youtube demo:- https://youtu.be/xPxsEpQxf_w?si=lCARZcZFL662_fvo

HAP is a 1 in 10 output Bernoulli/AND gate logic module for eurorack. Feed a trigger or gate into the input and HAP will generate 10 outputs that are high depending are several factors. Use it to trigger or gate envelopes, drums, samplers or as a clock source to drive sequencers.
Features:-
Trigger in - Connect an external trigger or gate (outputs are high for the duration of the input).
CV inputs A and B - Use a CV signal to control the Probability (1|2) or trigger skip.
Bernoulli gates - Both A and B are identical and both feature 2 outputs. The probability of an output being high is set using the control labelled '1|2'. The likelihood of it ignoring the input trigger is set using 'SKIP'. This gives you four random outputs (2x2) that are determined by the two controls.
5 x AND gates - HAP has 5 AND gates that are set high depending on the 4 Bernoulli outputs as follows:-
A1 T - Mirrors Bernoulli output A1 but ignores SKIP.
A1 B1 - Is high when both A1 and B1 are highbut ignores SKIP.
A1 B2 - is high when both A1 and B2 are high but ignores SKIP.
T B1 - Mirrors Bernoulli output B1 but ignores SKIP.
A2 B2 - is high when both A2 and B2 are high but ignores SKIP.

R - Is a random output that is high 50% of the time and low 50% of the time and is completely independent of the other outputs.

Power:- 30 mA +12V
Width:- 6HP
Depth:- 35mm approx with power header
Output:- 0/5 volt