Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

HEAVY DUTY Hidden Floating Shelf Bracket - Hardware Only (US Patent 9,861,198)

Like this item?

Add it to your favorites to revisit it later.
Favorite
Request a custom order and have something made just for you.

Description

THE ORIGINAL **HEAVY DUTY** - INVISIBLE FLOATING SHELF BRACKET -- US Patent 9,861,198 Beware of imitations.

Seamlessly support your rad floating shelving without external brackets or hardware. There are several ways to easily install. Feel free to call us with any questions 949 244 1083

These shelf brackets have been designed to support floating shelves up to 14" Deep and 2" + thick. They are constructed of 1/4" thick 100% American steel.

For MEDIUM DUTY brackets designed to support shelves < 10" deep and < 2" thick, please see this listing: https://www.etsy.com/listing/245847492/medium-duty-hidden-floating-shelf?ref=shop_home_active_1

ALWAYS mount floating shelves into wall blocking or studs.

The weight capacity of these brackets varies, by the thickness of the shelf you are hanging and the length of the bracket. As a general rule, these are capable of holding 45lbs lbs per horizontal rod in the bracket, assuming the bracket is mounted into wood or masonry.

We do custom versions of these all the time. Feel free to contact us with your requests.
____________________________________________________________

***READ THE ORDERING GUIDE, BELOW***

For shelves X long - You will need:

| Shelves 12" - 36" Long - Single Bracket per shelf
| Shelves 36" - 59" Long - Single bracket or two shorter brackets per shelf
| Shelves 60" - 90" Long - Two to three Brackets per shelf
| Shelves 91"- 120" Long - Two to Four Brackets per shelf

1. Order single or series of multiple brackets just shorter than your shelf length, Ideally somewhere between 2"-6" shorter

2. -Set screw holes can be drilled in the base of the rods to screw the shelf onto the bracket (see image). You can also glue shelves onto the bracket with silicone. Both are equally effective, but glue is easiest. Select NO if you will glue your shelves to the bracket or plan to drill your own screw holes after the shelf is installed. Either of these are the easiest and best ways to fix a shelf to our bracket.

Select YES in the drop down menu if you want screw holes drilled for you that you can send a screw into. Works as well, but slightly harder to do.

3.For more weight capacity, use more, shorter brackets. More horizontal rods= more weight capacity.

4. All brackets up to 30" long have two (2) rods, brackets 30", 38", 42", & 46" have 3 rods, 50", 54", & 58" have 4 rods, 70" & 78" have 5-rods.

5. Brackets have a 1-1/2" High x 1/4" Thick back bar and 6"-1/4" long x 3/4" OD rods.

6. Mounting holes are drilled 1" in from each end and 4" OC throughout. If these do not line up with a stud or blocking, the bracket back bar can be easily drilled through with a standard 3/16" drill bit to create a hole that does line up.

7. Installation Directions are included. Hardware and tools not included.

8. We recommend that you mount these brackets with a 2" long #10 wood screw (not included)

9. You can use paddle/spade bits, augers or forschner bits to drill the rod holes. We recommend auger bits, but they can be pricey. Hardware stores sell inexpensive (about $6) extension shafts that you can use with paddle/spade bits to reach the required 6-1/2" depth. Normal paddle/spade bits only allow about a 4.5" depth hole, FYI.
THE ORIGINAL **HEAVY DUTY** - INVISIBLE FLOATING SHELF BRACKET -- US Patent 9,861,198 Beware of imitations.

Seamlessly support your rad floating shelving without external brackets or hardware. There are several ways to easily install. Feel free to call us with any questions 949 244 1083

These shelf brackets have been designed to support floating shelves up to 14" Deep and 2" + thick. They are constructed of 1/4" thick 100% American steel.

For MEDIUM DUTY brackets designed to support shelves < 10" deep and < 2" thick, please see this listing: https://www.etsy.com/listing/245847492/medium-duty-hidden-floating-shelf?ref=shop_home_active_1

ALWAYS mount floating shelves into wall blocking or studs.

The weight capacity of these brackets varies, by the thickness of the shelf you are hanging and the length of the bracket. As a general rule, these are capable of holding 45lbs lbs per horizontal rod in the bracket, assuming the bracket is mounted into wood or masonry.

We do custom versions of these all the time. Feel free to contact us with your requests.
____________________________________________________________

***READ THE ORDERING GUIDE, BELOW***

For shelves X long - You will need:

| Shelves 12" - 36" Long - Single Bracket per shelf
| Shelves 36" - 59" Long - Single bracket or two shorter brackets per shelf
| Shelves 60" - 90" Long - Two to three Brackets per shelf
| Shelves 91"- 120" Long - Two to Four Brackets per shelf

1. Order single or series of multiple brackets just shorter than your shelf length, Ideally somewhere between 2"-6" shorter

2. -Set screw holes can be drilled in the base of the rods to screw the shelf onto the bracket (see image). You can also glue shelves onto the bracket with silicone. Both are equally effective, but glue is easiest. Select NO if you will glue your shelves to the bracket or plan to drill your own screw holes after the shelf is installed. Either of these are the easiest and best ways to fix a shelf to our bracket.

Select YES in the drop down menu if you want screw holes drilled for you that you can send a screw into. Works as well, but slightly harder to do.

3.For more weight capacity, use more, shorter brackets. More horizontal rods= more weight capacity.

4. All brackets up to 30" long have two (2) rods, brackets 30", 38", 42", & 46" have 3 rods, 50", 54", & 58" have 4 rods, 70" & 78" have 5-rods.

5. Brackets have a 1-1/2" High x 1/4" Thick back bar and 6"-1/4" long x 3/4" OD rods.

6. Mounting holes are drilled 1" in from each end and 4" OC throughout. If these do not line up with a stud or blocking, the bracket back bar can be easily drilled through with a standard 3/16" drill bit to create a hole that does line up.

7. Installation Directions are included. Hardware and tools not included.

8. We recommend that you mount these brackets with a 2" long #10 wood screw (not included)

9. You can use paddle/spade bits, augers or forschner bits to drill the rod holes. We recommend auger bits, but they can be pricey. Hardware stores sell inexpensive (about $6) extension shafts that you can use with paddle/spade bits to reach the required 6-1/2" depth. Normal paddle/spade bits only allow about a 4.5" depth hole, FYI.

Reviews

5 out of 5 stars
(613)
Reviewed by s orso
5 out of 5 stars
Jun 23, 2018
Came quick and exactly as described! I even called to ask questions and they were very helpful!
HEAVY DUTY Hidden Floating Shelf Bracket - Hardware Only (US Patent 9,861,198)

Reviewed by Electric Blanket
5 out of 5 stars
Jun 13, 2018
These are great. Thank you!
HEAVY DUTY Hidden Floating Shelf Bracket - Hardware Only (US Patent 9,861,198)

Payments

Secure options
  • Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
We accept Cash, Credit cards & Paypal.

Returns & exchanges

I gladly accept returns and exchanges
Contact me within: 14 days of delivery
Ship items back within: 30 days of delivery
I don't accept cancellations
But please contact me if you have any problems with your order.
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
Returns and exchange details
Due to the custom nature of cut-to-length shelving, we do not accept returns unless there is manufacturing defect that needs to be remedied.

Brackets or other Merchandise that has been used or altered will not be accepted for return or exchange. Returns and exchanges will be accepted within 30 days of the delivery confirmation date.

All returns packages should be insured. There will be no refunds on items damaged in shipping. You must file a claim with the carrier

We do not reimburse shipping costs.

Once we receive your return, your account will be refunded immediately, and the funds will transfer back into your account within 3–7 days.

Shipping policies

We ship Monday through Friday. Orders received after 12pm Friday will ship on Monday.

All orders ship via FEDEX or USPS unless prior arrangements have
been made. Please contact Silicate Studio prior to placing your order
for any special requests or to purchase a faster shipping service--9492441083. We can ship Fedex express or overnight. All special delivery arrangements will require that a custom listing be created for them.

Some International shipments may incur a VAT surcharge when they arrive in your country. We do not cover VAT in our international shipping rates as it varies per country.

You may call our office at 9492441083 or email us at hello@shelfology to arrange any special services

Once your order leaves Silicate Studio, it is out of our control. For questions
and concerns about shipping, please contact the carrier. It is totally lame that things get lost or stolen, however, Silicate Studio will not be responsible for any items lost or stolen during shipping.

Shipping fees are non-refundable.

Additional policies

Repairs

Repairs will be made on any of our products that suffer from manufacturers defects within one year of purchase, free of charge.

For wood mirrors:

Due to the nature of reclaimed wood, texture, color and general visual appearance will vary piece to piece. This is why we use it in the first place. Highlighting the wear (and damage) from previous service is the whole point of using it.

We will repair damage that occurs after purchase but not wear that is part of the patina of the wood.

Repairs due to customer wear or damage will be assessed on a case
by case basis. Minimum repair fee is $45 plus shipping. This includes
refinishing.

HEAVY DUTY Hidden Floating Shelf Bracket - Hardware Only (US Patent 9,861,198)

Ask a question
$33.00+
Other people want this. 11 people have this in their carts right now.

Overview

  • Handmade item
  • Materials: steel, hot rolled steel, love, sweat and tears, awesomeness, industrialness
  • Feedback: 613 reviews
  • Favorited by: 2798 people
  • Gift message available

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted
Exceptions may apply. See return policy

You may also like

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…