Fireplace Draft Cover CUSTOM MADE (your fireplace dimensions) with inserted Magnets or Adhesive Fasteners; Quilted cover insulation

CUSTOM made up to 40"W x 32"H
Please provide accurate measurements - Width and Height of the fireplace cover you need
The Width of the cover can be up to 40" (100 cm) and Height can be up to 32" ( 80 cm) and it will be made for NO additional cost
(If you need a larger than 40" by 32" size , Please contact for a quote )

This Fireplace cover is designed for all types of fireplaces. Magnetic cover can be attached to the metal frame or to the lintel ( a piece of steel that holds up the top row of bricks in the fireplace). The cover with self-adhesive VELCRO® brand fasteners can be attached to surface of the fireplace (smooth surfaces)
The cover is easy to remove, when you want to use your fireplace and easy to install , when you want to avoid draft, smell or hide ashes.

It is made of heavy-duty Quilted Utility fabric in grey/ metallic color and super strong flat Inserted Magnets ( or self-adhesive Hook Loop VELCRO® brand fasteners/ strips)

Depends on the type of your fireplace, It can be made with
4 magnets (along the top only),
or 6 magnets (4 along the top & 2 on the sides),
or 8 magnets (4 along the top & 4 on the sides).

It's Made to Order according to your measurements to fit your fireplace (up to 40"W x 32"H)
Just measure the area you plan to cover and Please provide accurate measurements and double check them before placing your order
Send a photo of your fireplace, if possible, to modify the cover.

Please Remember:
*Magnets do not attract all metals. Iron (Fe), Nickel (Ni), Cobalt (Co) and some alloys are the only metals that respond to magnetism. Please check before you order.
*Adhesive Fasteners are recommended for smooth surfaces. Please include a few inches for overlaps (for a fireplace cover with Adhesive Hook & Loop Fasteners)

Tips:
*You can always insert on your own additional magnets to the hem of the cover, if needed. I would recommend "sew-on" magnets
*Make it all the way to the ground to avoid draft at the bottom, If it's possible.
* If you have an Open Fireplace, Magnetic tape strip or Metal Angle bar mounted to the top/sides of the fireplaces will be a great solution to hold this Magnetic cover and It should be slightly larger to overlap the fireplace opening for better insulation.


Keep the heat out and the cool in during the summer!
Keep the cold out and the heat in during the winter!