SALE! 1.1" x 1.2" UNIVERSAL Folding/Reduction Die @ 17-Degree Tapers for Half Dollar and Dollar-Sized Coins

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

SALE! 1.1" x 1.2" UNIVERSAL Folding/Reduction Die @ 17-Degree Tapers for Half Dollar and Dollar-Sized Coins

Message Seller

$31.95

Please select a quantity

Item details

Material

Hardened Stainless Steel

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market. This die even leaves a polished finish to the edges of the ring, (see the last photo in this listing for reference.)



1.1" x 1.2” UNIVERSAL FOLDING/REDUCTION DIE DESCRIPTION:

This Universal Reduction Die is made of the highest-quality Hardened Steel, is precision CNC-Machined, double-sided, and is used to fold and reduce ANY coin, token, or medallion that is between 1.2" inches (30.4 mm) in diameter, down to 1.1” inches (27.9 mm) in diameter. It can also be used to further reduce U.S. Half Dollar coins as well as the Dollar-sized and American Silver Eagle-sized coins to the smaller sizes.


* Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Below is one of many reviews that I have received regarding my coin ring tools:

* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



Buying the right reduction dies the first time around is key; here's a great article on what to look for when buying them:
http://coinringusablog.com/2015/09/11/4-things-to-look-for-when-buying-reduction-dies-to-make-coin-rings/


After consulting with manufacturers of ring-sizing machines; the inner walls of these universal reduction dies are pitched at an optimal degree of angle to allow for making the best-looking coin rings without sacrificing any of the coins' detail.

Each die has also been precision engraved with the corresponding size opening for easy identification.


This USA-Made Universal Reduction Die is sized to fit perfectly under most ring sizing machines, arbor presses, and hydraulic presses; and can be used with the plastic bearing balls to fold the coins, as it won’t mar or scratch the detail on the inside of the coin.



*** For a video tutorial on this and the other 5 dies in my set, copy and paste the link below into your web browser:

https://www.youtube.com/watch?v=fmQo9etqD4I



Be sure to Subscribe to my YouTube channel found under "CoinRingUSA" for new video updates, or click on the following link to go directly there: youtube.com/CoinRingUSA



To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


* Making coin rings and creating the highest-quality coin ring making tools is what I love doing. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


And as always; I can be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

Thanks, and here's to your coin ring-making success!



======================================


*** SAFETY FIRST ***

- Always wear safety glasses.
- Keep fingers, long hair, and loose clothing away from any pinch points on the die.
- Make sure to anneal (heat, then quench) the coin often while working it.



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market. This die even leaves a polished finish to the edges of the ring, (see the last photo in this listing for reference.)



1.1" x 1.2” UNIVERSAL FOLDING/REDUCTION DIE DESCRIPTION:

This Universal Reduction Die is made of the highest-quality Hardened Steel, is precision CNC-Machined, double-sided, and is used to fold and reduce ANY coin, token, or medallion that is between 1.2" inches (30.4 mm) in diameter, down to 1.1” inches (27.9 mm) in diameter. It can also be used to further reduce U.S. Half Dollar coins as well as the Dollar-sized and American Silver Eagle-sized coins to the smaller sizes.


* Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Below is one of many reviews that I have received regarding my coin ring tools:

* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



Buying the right reduction dies the first time around is key; here's a great article on what to look for when buying them:
http://coinringusablog.com/2015/09/11/4-things-to-look-for-when-buying-reduction-dies-to-make-coin-rings/


After consulting with manufacturers of ring-sizing machines; the inner walls of these universal reduction dies are pitched at an optimal degree of angle to allow for making the best-looking coin rings without sacrificing any of the coins' detail.

Each die has also been precision engraved with the corresponding size opening for easy identification.


This USA-Made Universal Reduction Die is sized to fit perfectly under most ring sizing machines, arbor presses, and hydraulic presses; and can be used with the plastic bearing balls to fold the coins, as it won’t mar or scratch the detail on the inside of the coin.



*** For a video tutorial on this and the other 5 dies in my set, copy and paste the link below into your web browser:

https://www.youtube.com/watch?v=fmQo9etqD4I



Be sure to Subscribe to my YouTube channel found under "CoinRingUSA" for new video updates, or click on the following link to go directly there: youtube.com/CoinRingUSA



To see the other coin ring-making tools available; be sure to visit: CoinRingUSA.com


* Making coin rings and creating the highest-quality coin ring making tools is what I love doing. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


And as always; I can be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

Thanks, and here's to your coin ring-making success!



======================================


*** SAFETY FIRST ***

- Always wear safety glasses.
- Keep fingers, long hair, and loose clothing away from any pinch points on the die.
- Make sure to anneal (heat, then quench) the coin often while working it.



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted

Reviews

5 out of 5 stars (1,379)

You may also like