Whoa! You can't buy your own item.

X-Men Quicksilver Stereobelt Kit

X-Men Quicksilver Stereobelt Kit

Ask a question

$182.00+

Please select an option
Please select a quantity
Almost gone. There's only 2 left.

Overview

  • Handmade item
  • Craft type: 3D printing, Electronics & circuitry, Model making
  • Made to order
  • Favorited by: 256 people
This shop accepts Etsy gift cards

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From Emeryville, CA
Returns and exchanges accepted
Exceptions may apply. See return policy

Description

This is a 60+ piece DIY kit replicating Quicksilver's Stereobelt from "Days of Future Past" - built referencing screengrabs, VFX reels and original concept art by Henry Fong.

NEW ULTIMATE v3 - now with faux metal laser cut trim - looks like real metal! Real screws - look even cooler and allow units to be opened up!

INCLUDES: Decals (not pre-cut), Belt Clips, 1/4" headphone jack, 1/4" headphone plug
Cassette Tape Optional
Belt NOT included

Parts are 3D printed and laser cut and assemble into the two primary Stereobelt units and battery packs which clip to a belt that you supply. It has a real 1/4" headphone jack (headphones not included) and holds a cassette tape (optional). The Stereobelt is non-functional - none of the knobs, switches or sliders move. However, the units are hollow and your own electronics can be installed if desired.

The Stereobelt is 3D printed in strong PLA (biodegradable) plastic and assembles with real hardware and glue. The parts are printed in silver, black and brown and don't need painted but they CAN be for an even nicer finish.

Simple tools are needed such as a screwdriver, x-acto knife, emery board (nail file) and super glue - allen wrenches for the screws are already included. Some minor trimming may be needed for some parts. Please be aware that you will be able to see the layers of the 3D print and some minor blemishes and discolorations are to be expected. Surfaces will have a textured look and feel which can be seen in the pictures.

Assembly is easy, but I encourage you to take a look at the fully-illustrated assembly directions to see what is involved. Included in the directions are links for reference pictures, recommended belt and headphones to complete your costume and a history of the Stereobelt. Assembly Directions:
http://charlesworth-dynamics.com/2013/08/instructions.html

PLEASE NOTE:
- Kit includes: 60+ unpainted parts to build side units and battery packs with belt clips
- Laser cut faux metal trim looks like real metal
- Assembles with real socket head screws - easy to open back up
- Allen wrenches for screws are included
- Headphones NOT included but kit DOES include the 1/4" headphone jack and plug (for adding to headphones of your choice)
- Kit uses movie-accurate 1/4" headphone jack NOT the typical 1/8" size found on most devices
- Decal sheet - includes duplicates of all decals - NOT pre-cut - you must cut them out yourself

- Stereobelt is non-functional and unpainted.
- Belt is not included - see assembly directions for recommendation
- Any cassette tape should fit in unit or order one with your kit
- Pictures # 1 show Stereobelt with painted details such as the buttons and transport symbols

Cosplay photos by Angela Juarez
This is a 60+ piece DIY kit replicating Quicksilver's Stereobelt from "Days of Future Past" - built referencing screengrabs, VFX reels and original concept art by Henry Fong.

NEW ULTIMATE v3 - now with faux metal laser cut trim - looks like real metal! Real screws - look even cooler and allow units to be opened up!

INCLUDES: Decals (not pre-cut), Belt Clips, 1/4" headphone jack, 1/4" headphone plug
Cassette Tape Optional
Belt NOT included

Parts are 3D printed and laser cut and assemble into the two primary Stereobelt units and battery packs which clip to a belt that you supply. It has a real 1/4" headphone jack (headphones not included) and holds a cassette tape (optional). The Stereobelt is non-functional - none of the knobs, switches or sliders move. However, the units are hollow and your own electronics can be installed if desired.

The Stereobelt is 3D printed in strong PLA (biodegradable) plastic and assembles with real hardware and glue. The parts are printed in silver, black and brown and don't need painted but they CAN be for an even nicer finish.

Simple tools are needed such as a screwdriver, x-acto knife, emery board (nail file) and super glue - allen wrenches for the screws are already included. Some minor trimming may be needed for some parts. Please be aware that you will be able to see the layers of the 3D print and some minor blemishes and discolorations are to be expected. Surfaces will have a textured look and feel which can be seen in the pictures.

Assembly is easy, but I encourage you to take a look at the fully-illustrated assembly directions to see what is involved. Included in the directions are links for reference pictures, recommended belt and headphones to complete your costume and a history of the Stereobelt. Assembly Directions:
http://charlesworth-dynamics.com/2013/08/instructions.html

PLEASE NOTE:
- Kit includes: 60+ unpainted parts to build side units and battery packs with belt clips
- Laser cut faux metal trim looks like real metal
- Assembles with real socket head screws - easy to open back up
- Allen wrenches for screws are included
- Headphones NOT included but kit DOES include the 1/4" headphone jack and plug (for adding to headphones of your choice)
- Kit uses movie-accurate 1/4" headphone jack NOT the typical 1/8" size found on most devices
- Decal sheet - includes duplicates of all decals - NOT pre-cut - you must cut them out yourself

- Stereobelt is non-functional and unpainted.
- Belt is not included - see assembly directions for recommendation
- Any cassette tape should fit in unit or order one with your kit
- Pictures # 1 show Stereobelt with painted details such as the buttons and transport symbols

Cosplay photos by Angela Juarez

Reviews

5 out of 5 stars
(258)

Payment options

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • GiftcardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.

Returns & exchanges

I gladly accept returns, exchanges, and cancellations

Contact me within: 5 days of delivery
Ship items back within: 14 days of delivery
Request a cancellation within: 12 hours of purchase

The following items can't be returned or exchanged

Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
  • Custom or personalized orders
  • Digital downloads

Conditions of return

Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.

Questions about your order?

Please contact me if you have any problems with your order.

FAQs

3D printed objects are made by 'slicing' a digital model into many thin layers. These slices are sent to a printer that 'draws' each layer by extruding plastic through a hot nozzle.
There are a lot of different materials available now but the two most common are ABS (LEGO plastic) and PLA (biodegradable plastic) which is what Charlesworth Dynamics uses.
While the 3D prints aren't hazardous, they are not food, dishwasher or microwave safe.
They are very strong, but will break just like any plastic item if abused.
3D prints are very strong if printed properly but will break just like any plastic item if abused. Since the object is printed in layers, they will have a slightly ridged texture to them unlike a injection molded object. There is usually a 'zipper' which is a slight vertical seam that indicates where each new layer starts. They may have slight defects or blemishes and the bottom which adheres to the print bed may have some discoloration. Kit pieces may need minor clean up or trimming to fit together. This is typical of most 3D prints.
Yes, you can sand and paint 3D prints like a normal plastic model. You can even use products like Bondo Glazing and Spotting putty to minimize and smooth the 3D printed texture. Make sure to use a plastic-friendly paint.
I include a link for assembly instructions with your shipping notification, but here's a link for all assembly guides:
charlesworth-dynamics.com/2013/08/instructions.html

Please don't hesitate to contact me with any questions or recommendations.
On occasion I will also build items out of 'real' parts and hardware - typically I use vintage Film & TV equipment parts. I have made lamps out of old lenses and jewelry out of old camera parts. Keep in mind that these are all used parts and will show their wear and tear and age - it's part of their charm.

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…