SALE! 25 cent & 50 cent "STABILIZER"/Folding/Reduction Die for the US Quarter + Half Dollar, Hardened Stainless Steel @ 17-Degree Tapers

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

SALE! 25 cent & 50 cent "STABILIZER"/Folding/Reduction Die for the US Quarter + Half Dollar, Hardened Stainless Steel @ 17-Degree Tapers

Message Seller

$31.95

Please select a quantity
Other people want this. 4 people have this in their carts right now.

Item details

Material

Hardened and Wear Resistant Stainless Steel

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of "stabilizer"/folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market.



The .25¢ /.50¢ "STABILIZING", Folding, and Reduction Die for Folding the US Quarter & the US Half Dollar:


NOTE --- The older British/India 1 Rupee coin will perfectly fit within the .50¢ side of this stabilizer reduction die for folding over, as it's roughly 1.2" in outer diameter.


With this New Stabilizing Reduction Die that I personally designed, you can now make a level and straight first initial fold to ANY US Quarter or US Half Dollar, because the coins’ outer edge is making complete contact with the edge of the inner straight wall design of the die that stabilizes the coin at the top, so there is no sideways movement to the coin, only downward movement. (Note the last photo showing a perfectly folded-over US Quarter).



NOTE: You will need the Universal 0.9" x 1.0" folding/reduction die in addition to this die to complete the folding process on the US Quarters and the US Half Dollars. Listing link for that reduction die is found below:

https://www.etsy.com/listing/261283954/09-x-10-universal-foldingreduction-die?ref=shop_home_active_30



*** Here are just a few of the many complements that folks have sent me regarding this unique die:


* "This die makes it really simple to start the fold on both half dollars and quarters. It's idiot proof. Before I found out about this, I was relying on using my ring stretcher to start quarters which was VERY imprecise."
ricksironworks on May 30, 2017
5 out of 5 stars



* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



* "The BEST reduction dies out there. Please take a look at his other items as well. They are fantastic! He is also a great seller, ships quick, and is very responsive. He also has great instructional videos." --- Michael B.



* "These new stabilizer dies work like a dream! I'm an engineer by trade and I can say that the quality, fit, and finish on these dies are some of the best that I have seen in coin ring tools. The engraved markings are a really nice feature as well, thanks Martin!" --- Richard J.



* "These new Dies work perfectly at getting an even and level fold in the coin. I love the fact that each of the dies can allow me to fold over two different types of coins. I'm very pleased overall and even more pleased with the fast shipping. These are a truly a must-have for anyone that makes coin rings." --- Susan C.



You can see a quick video where I demonstrate the "stabilizer" die in use below:

https://www.youtube.com/watch?v=YnYdq59pOFY&t=106s



*** Here's why you should buy this new "Stabilizer" Reduction Die to fold over any US Quarter or US Half Dollar from the CoinRingUSA Shop:


1.) This die is made of long-lasting hardened and wear-resistant stainless steel, and not of plastic that wears out over time.


2.) I personally designed this die and chose to make it fit the US Quarter and the US Half Dollar because these are 2 of the most popular US Coins that people are using to make coin rings out of.


3.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.


4.) The level of quality of my tools is not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces. Hardened stainless steel also offers the highest level of rust resistance; so no more rusty or pitted dies!


5.) Most of the Coin Ring Center Punch kits that people own are sized to punch a center hole into any US Quarter, US Half Dollar, and the Morgan/Peace Silver Dollar; so the 2 new "Stabilizer" Reduction Dies that I personally designed are a perfect complement to any coin ring center punch kit that you may already own.


6.) Each die has also been precision engraved with the corresponding size opening for easy identification, and they can be used along with the New and Improved Universal Stabilizer Folding Cones or the Delrin bearing balls to fold the coins; while leaving no marks or scratches, thus preserving the detail on the inside of the coin.


7.) My reduction dies are pitched at an optimal degree of angle to allow for easy folding, reducing, and for making the best-looking coin rings without sacrificing any of the coins' detail.


8.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.


9.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


10.) All of my coin ring-making tools are 100% guaranteed


11.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



IT'S HIGHLY RECOMMENDED TO USE BOTH THE IMPROVED STAINLESS STEEL STARTER CONE AND THE IMPROVED STAINLESS STEEL FOLDING CONES WITH THIS DIE, FOUND IN THE LISTING LINKS BELOW:


https://www.etsy.com/listing/290724583/universal-stainless-steel-starter-cone?ref=shop_home_active_7


===============================================


https://www.etsy.com/listing/475323877/universal-stainless-steel-stabilizer?ref=shop_home_active_5



After many requests from people to offer a reduction die for the US Quarter; here it is, only better! (The last photo shows a US Quarter perfectly folded-over after using this unique Stabilizing Reduction Die.)

This new die will make a great compliment to your existing reduction dies, as those dies are needed to further fold over and reduce the US Half Dollar to its' final size and shape.


This tool has an opening on one side that is machined to fit the US Quarter, and machined to fit the US Half Dollar on the other side. It is also precision engraved with the type of coin that fits it perfectly on the outer edge for easy identification:

" .25¢ " side is for the US Quarter
" .50¢ " side is for the US Half Dollar


They can be used with the Delrin plastic bearing balls or even the New Folding Cones to fold the coins, as it will provide TWICE the stability to the coin while leaving no marks and preserving 100% of the detail on the inside of the coin.



This is one of 14 dies that I currently have available. If you do not see all of the dies available, then they are temporarily out of stock due to high demand. They will be restocked as soon as they become available. Please revisit my store often. (The coins pictured are not included.)


Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for new video updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


Visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tools... thanks!



To see the other coin ring-making tools available; be sure to visit:
CoinRingUSA.com



*** SAFETY FIRST ***
--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points on the die.
--- Anneal (heat & quench) the coin often to keep the metal in a soft state when using the dies.



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of "stabilizer"/folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market.



The .25¢ /.50¢ "STABILIZING", Folding, and Reduction Die for Folding the US Quarter & the US Half Dollar:


NOTE --- The older British/India 1 Rupee coin will perfectly fit within the .50¢ side of this stabilizer reduction die for folding over, as it's roughly 1.2" in outer diameter.


With this New Stabilizing Reduction Die that I personally designed, you can now make a level and straight first initial fold to ANY US Quarter or US Half Dollar, because the coins’ outer edge is making complete contact with the edge of the inner straight wall design of the die that stabilizes the coin at the top, so there is no sideways movement to the coin, only downward movement. (Note the last photo showing a perfectly folded-over US Quarter).



NOTE: You will need the Universal 0.9" x 1.0" folding/reduction die in addition to this die to complete the folding process on the US Quarters and the US Half Dollars. Listing link for that reduction die is found below:

https://www.etsy.com/listing/261283954/09-x-10-universal-foldingreduction-die?ref=shop_home_active_30



*** Here are just a few of the many complements that folks have sent me regarding this unique die:


* "This die makes it really simple to start the fold on both half dollars and quarters. It's idiot proof. Before I found out about this, I was relying on using my ring stretcher to start quarters which was VERY imprecise."
ricksironworks on May 30, 2017
5 out of 5 stars



* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



* "The BEST reduction dies out there. Please take a look at his other items as well. They are fantastic! He is also a great seller, ships quick, and is very responsive. He also has great instructional videos." --- Michael B.



* "These new stabilizer dies work like a dream! I'm an engineer by trade and I can say that the quality, fit, and finish on these dies are some of the best that I have seen in coin ring tools. The engraved markings are a really nice feature as well, thanks Martin!" --- Richard J.



* "These new Dies work perfectly at getting an even and level fold in the coin. I love the fact that each of the dies can allow me to fold over two different types of coins. I'm very pleased overall and even more pleased with the fast shipping. These are a truly a must-have for anyone that makes coin rings." --- Susan C.



You can see a quick video where I demonstrate the "stabilizer" die in use below:

https://www.youtube.com/watch?v=YnYdq59pOFY&t=106s



*** Here's why you should buy this new "Stabilizer" Reduction Die to fold over any US Quarter or US Half Dollar from the CoinRingUSA Shop:


1.) This die is made of long-lasting hardened and wear-resistant stainless steel, and not of plastic that wears out over time.


2.) I personally designed this die and chose to make it fit the US Quarter and the US Half Dollar because these are 2 of the most popular US Coins that people are using to make coin rings out of.


3.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.


4.) The level of quality of my tools is not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces. Hardened stainless steel also offers the highest level of rust resistance; so no more rusty or pitted dies!


5.) Most of the Coin Ring Center Punch kits that people own are sized to punch a center hole into any US Quarter, US Half Dollar, and the Morgan/Peace Silver Dollar; so the 2 new "Stabilizer" Reduction Dies that I personally designed are a perfect complement to any coin ring center punch kit that you may already own.


6.) Each die has also been precision engraved with the corresponding size opening for easy identification, and they can be used along with the New and Improved Universal Stabilizer Folding Cones or the Delrin bearing balls to fold the coins; while leaving no marks or scratches, thus preserving the detail on the inside of the coin.


7.) My reduction dies are pitched at an optimal degree of angle to allow for easy folding, reducing, and for making the best-looking coin rings without sacrificing any of the coins' detail.


8.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.


9.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


10.) All of my coin ring-making tools are 100% guaranteed


11.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



IT'S HIGHLY RECOMMENDED TO USE BOTH THE IMPROVED STAINLESS STEEL STARTER CONE AND THE IMPROVED STAINLESS STEEL FOLDING CONES WITH THIS DIE, FOUND IN THE LISTING LINKS BELOW:


https://www.etsy.com/listing/290724583/universal-stainless-steel-starter-cone?ref=shop_home_active_7


===============================================


https://www.etsy.com/listing/475323877/universal-stainless-steel-stabilizer?ref=shop_home_active_5



After many requests from people to offer a reduction die for the US Quarter; here it is, only better! (The last photo shows a US Quarter perfectly folded-over after using this unique Stabilizing Reduction Die.)

This new die will make a great compliment to your existing reduction dies, as those dies are needed to further fold over and reduce the US Half Dollar to its' final size and shape.


This tool has an opening on one side that is machined to fit the US Quarter, and machined to fit the US Half Dollar on the other side. It is also precision engraved with the type of coin that fits it perfectly on the outer edge for easy identification:

" .25¢ " side is for the US Quarter
" .50¢ " side is for the US Half Dollar


They can be used with the Delrin plastic bearing balls or even the New Folding Cones to fold the coins, as it will provide TWICE the stability to the coin while leaving no marks and preserving 100% of the detail on the inside of the coin.



This is one of 14 dies that I currently have available. If you do not see all of the dies available, then they are temporarily out of stock due to high demand. They will be restocked as soon as they become available. Please revisit my store often. (The coins pictured are not included.)


Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for new video updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


Visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tools... thanks!



To see the other coin ring-making tools available; be sure to visit:
CoinRingUSA.com



*** SAFETY FIRST ***
--- Always wear safety glasses.
--- Keep fingers, long hair, and loose clothing away from any pinch points on the die.
--- Anneal (heat & quench) the coin often to keep the metal in a soft state when using the dies.



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Ready to ship in 3–5 business days
From United States
Returns and exchanges accepted

Reviews

5 out of 5 stars (1,379)

You may also like