Morgan Dollar & Silver Eagle "STABILIZER" / Folding / Reduction Die made of Hardened Stainless Steel @ 17-Degree Tapers

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

Morgan Dollar & Silver Eagle "STABILIZER" / Folding / Reduction Die made of Hardened Stainless Steel @ 17-Degree Tapers

Message Seller

$36.95

Please select a quantity
Other people want this. 5 people have this in their carts right now.

Item details

Material

Hardened Stainless Steel

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of "stabilizer"/folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market.



MORGAN DOLLAR & AMERICAN SILVER EAGLE "STABILIZER"/FOLDING/REDUCTION DIE


You can now make a level and straight first initial fold to the coin, because the coins’ outer reeded edge is making complete contact with the edge of the inner straight wall design of the die that stabilizes the coin, so there is no sideways movement to the coin, only downward movement.



NOTE: You will need the Universal 1.3" x 1.4" folding/reduction die in addition to this die to complete the folding process on the American Silver Eagles and the Morgan Dollars. Listing link for that reduction die is found below:

https://www.etsy.com/listing/234298343/13-x-14-universal-foldingreduction-die?ref=shop_home_active_35



You can see a quick video where I demonstrate the "stabilizer" die in use below:

https://www.youtube.com/watch?v=YnYdq59pOFY&t=106s



*** Here's why you should buy this new "Stabilizer" Reduction Die to fold over any Morgan/Peace Dollar or American Silver Eagle from the CoinRingUSA Shop:


1.) This die is made of long-lasting hardened and wear-resistant stainless steel, and not of plastic that wears out over time.


2.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.


3.) The level of quality of my tools is not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces. Hardened stainless steel also offers the highest level of rust resistance; so no more rusty or pitted dies!


4.) Most of the Coin Ring Center Punch kits that people own are sized to punch a center hole into any US Quarter, US Half Dollar, and the Morgan/Peace Silver Dollar; so the 2 new "Stabilizer" Reduction Dies that I personally designed are a perfect complement to any coin ring center punch kit that you may already own.


5.) Each die has also been precision engraved with the corresponding size opening for easy identification, and they can be used along with the New and Improved Universal Stabilizer Folding Cones or the Delrin bearing balls to fold the coins; while leaving no marks or scratches, thus preserving the detail on the inside of the coin.


6.) My reduction dies are pitched at an optimal degree of angle to allow for easy folding, reducing, and for making the best-looking coin rings without sacrificing any of the coins' detail.


7.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.


8.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


9.) All of my coin ring-making tools are 100% guaranteed


10.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



IT'S HIGHLY RECOMMENDED TO USE BOTH THE IMPROVED STAINLESS STEEL STARTER CONE AND THE IMPROVED STAINLESS STEEL FOLDING CONES WITH THIS DIE, FOUND IN THE LISTING LINKS BELOW:


https://www.etsy.com/listing/290724583/universal-stainless-steel-starter-cone?ref=shop_home_active_7


===============================================


https://www.etsy.com/listing/475323877/universal-stainless-steel-stabilizer?ref=shop_home_active_5



*** Here are just a few of the many reviews and complements that folks have sent me regarding these coin ring tools: ***


* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



* "The BEST reduction dies out there. Please take a look at his other items as well. They are fantastic! He is also a great seller, ships quick, and is very responsive. He also has great instructional videos." --- Michael B.



* "These new stabilizer dies work like a dream! I'm an engineer by trade and I can say that the quality, fit, and finish on these dies are some of the best that I have seen in coin ring tools. The engraved markings are a really nice feature as well, thanks Martin!" --- Richard J.



* "These new Stabilizer reduction dies work perfectly at getting an even and level fold in the coin. I love the fact that each of the dies can allow me to fold over two different types of coins. I'm very pleased overall and even more pleased with the fast shipping. These are a truly a must-have for anyone that makes coin rings." --- Susan C.



This new die will make a great compliment to your existing reduction dies, as those are needed to further fold and reduce the Morgan Dollar and the American Silver Eagle coins to its' final size and shape.

This has an opening on one side that is machined to fit and stabilize the Morgan and the Peace Silver Dollar, and machined to fit and stabilize the American Silver Eagle on the other side.


It is also precision engraved with the type of coin that fits it perfectly on the outer edge for easy identification:

" $1." -------- for the Morgan/Peace Dollar side
"A.S.E." ---- for the American Silver Eagle side


(The 4th photo shows a Morgan Silver Dollar folded over after using this stabilizing die.)

(See the listing pictures for reference).



Copy and paste the following address into your internet browser to watch a YouTube video using these dies:

https://www.youtube.com/watch?v=YnYdq59pOFY



This is one of 9 dies that I currently have available. If you do not see all 9 dies listed, then they are temporarily out of stock due to high demand. They will be restocked as soon as they become available. (The coins pictured are not included.)



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for video updates, or click on the following link to go directly there: https://www.youtube.com/channel/UCBE8FTorAemLhMdiV0Pn5yg



To see the other coin ring-making tools available; be sure to visit:
http://www.CoinRingUSA.com



*** SAFETY FIRST ***
--- Always wear safety glasses.
--- Anneal (heat & quench) the coin often to keep the metal in a soft state when using the dies
--- Keep fingers, long hair, and loose clothing away from any pinch points on the die.



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of "stabilizer"/folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market.



MORGAN DOLLAR & AMERICAN SILVER EAGLE "STABILIZER"/FOLDING/REDUCTION DIE


You can now make a level and straight first initial fold to the coin, because the coins’ outer reeded edge is making complete contact with the edge of the inner straight wall design of the die that stabilizes the coin, so there is no sideways movement to the coin, only downward movement.



NOTE: You will need the Universal 1.3" x 1.4" folding/reduction die in addition to this die to complete the folding process on the American Silver Eagles and the Morgan Dollars. Listing link for that reduction die is found below:

https://www.etsy.com/listing/234298343/13-x-14-universal-foldingreduction-die?ref=shop_home_active_35



You can see a quick video where I demonstrate the "stabilizer" die in use below:

https://www.youtube.com/watch?v=YnYdq59pOFY&t=106s



*** Here's why you should buy this new "Stabilizer" Reduction Die to fold over any Morgan/Peace Dollar or American Silver Eagle from the CoinRingUSA Shop:


1.) This die is made of long-lasting hardened and wear-resistant stainless steel, and not of plastic that wears out over time.


2.) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.


3.) The level of quality of my tools is not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces. Hardened stainless steel also offers the highest level of rust resistance; so no more rusty or pitted dies!


4.) Most of the Coin Ring Center Punch kits that people own are sized to punch a center hole into any US Quarter, US Half Dollar, and the Morgan/Peace Silver Dollar; so the 2 new "Stabilizer" Reduction Dies that I personally designed are a perfect complement to any coin ring center punch kit that you may already own.


5.) Each die has also been precision engraved with the corresponding size opening for easy identification, and they can be used along with the New and Improved Universal Stabilizer Folding Cones or the Delrin bearing balls to fold the coins; while leaving no marks or scratches, thus preserving the detail on the inside of the coin.


6.) My reduction dies are pitched at an optimal degree of angle to allow for easy folding, reducing, and for making the best-looking coin rings without sacrificing any of the coins' detail.


7.) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.


8.) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my new blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.


9.) All of my coin ring-making tools are 100% guaranteed


10.) Why settle for buying inferior coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



IT'S HIGHLY RECOMMENDED TO USE BOTH THE IMPROVED STAINLESS STEEL STARTER CONE AND THE IMPROVED STAINLESS STEEL FOLDING CONES WITH THIS DIE, FOUND IN THE LISTING LINKS BELOW:


https://www.etsy.com/listing/290724583/universal-stainless-steel-starter-cone?ref=shop_home_active_7


===============================================


https://www.etsy.com/listing/475323877/universal-stainless-steel-stabilizer?ref=shop_home_active_5



*** Here are just a few of the many reviews and complements that folks have sent me regarding these coin ring tools: ***


* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



* "The BEST reduction dies out there. Please take a look at his other items as well. They are fantastic! He is also a great seller, ships quick, and is very responsive. He also has great instructional videos." --- Michael B.



* "These new stabilizer dies work like a dream! I'm an engineer by trade and I can say that the quality, fit, and finish on these dies are some of the best that I have seen in coin ring tools. The engraved markings are a really nice feature as well, thanks Martin!" --- Richard J.



* "These new Stabilizer reduction dies work perfectly at getting an even and level fold in the coin. I love the fact that each of the dies can allow me to fold over two different types of coins. I'm very pleased overall and even more pleased with the fast shipping. These are a truly a must-have for anyone that makes coin rings." --- Susan C.



This new die will make a great compliment to your existing reduction dies, as those are needed to further fold and reduce the Morgan Dollar and the American Silver Eagle coins to its' final size and shape.

This has an opening on one side that is machined to fit and stabilize the Morgan and the Peace Silver Dollar, and machined to fit and stabilize the American Silver Eagle on the other side.


It is also precision engraved with the type of coin that fits it perfectly on the outer edge for easy identification:

" $1." -------- for the Morgan/Peace Dollar side
"A.S.E." ---- for the American Silver Eagle side


(The 4th photo shows a Morgan Silver Dollar folded over after using this stabilizing die.)

(See the listing pictures for reference).



Copy and paste the following address into your internet browser to watch a YouTube video using these dies:

https://www.youtube.com/watch?v=YnYdq59pOFY



This is one of 9 dies that I currently have available. If you do not see all 9 dies listed, then they are temporarily out of stock due to high demand. They will be restocked as soon as they become available. (The coins pictured are not included.)



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for video updates, or click on the following link to go directly there: https://www.youtube.com/channel/UCBE8FTorAemLhMdiV0Pn5yg



To see the other coin ring-making tools available; be sure to visit:
http://www.CoinRingUSA.com



*** SAFETY FIRST ***
--- Always wear safety glasses.
--- Anneal (heat & quench) the coin often to keep the metal in a soft state when using the dies
--- Keep fingers, long hair, and loose clothing away from any pinch points on the die.



*** Shipping:

This item will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted
See return policy

Reviews

5 out of 5 stars (1,370)

Returns & exchanges

I gladly accept returns and exchanges

Contact me within: 7 days of delivery
Ship items back within: 14 days of delivery

I don't accept cancellations

But please contact me if you have any problems with your order.

Returns and exchange details

Returned items must be in their new condition. Buyer pays for return shipping, and a 10% restocking fee will apply.

Shipping policies

*** NOTE *** Please combine the saved items in your shopping cart BEFORE you check out in order to save on shipping costs.

Processing time may vary between items ordered.

My Shop ships worldwide! If you are ordering from outside of the United States, please be aware that your country may impose a VAT, (Value Added Tax); (also known as a Customs Duty), on the order. You will be asked to pay this additional fee before receiving your parcel. Please research your country's laws and any additional fees that may be placed on the items you'd like to order.

Also be aware that your Customs may delay the package for an unknown period of time. You will need to inquire with your local Post Office or postal service for further delivery information. My Shop is not responsible for customs delays.

Customs forms paperwork will be placed on the package to expedite the process.

Payments

Secure options
Accepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
I accept PayPal and all major Credit cards and Debit cards. If you do not have a PayPal account, you can still make your payment through Paypal using your credit or debit card, or; you can pay through Etsy directly for your items.

Major Debit or Credit Cards:

- VISA
- MasterCard
- American Express
- Discover

Additional policies

Thank you for your business! Reviews of the tools purchased are always appreciated.

If you would like to place a custom order, please select the blue "Request Custom Order" tab on my Shop's Homepage, or send me a message through Etsy with your request.

Slight non-functional variations of things such as color, texture, and engraving on items may occur from time to time.

SAFETY FIRST! Always use safety glasses and keep hair and loose clothing away from pinch points and sources of heat while working.

You may also like