SALE! The "6-Pack" SET of UNIVERSAL Folding, Reduction and "Stabilizer" Dies made of Hardened Stainless Steel

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

SALE! The "6-Pack" SET of UNIVERSAL Folding, Reduction and "Stabilizer" Dies made of Hardened Stainless Steel

Message Seller

$179.95

Please select a quantity

Item details

Materials

Hardened and Wear Resistant Stainless Steel, Abrasion Resistant Rubber

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of "stabilizer"/folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market. These dies even leave a polished finish to the edges of the ring, (see the last photo in this listing for reference.)


This "6-Pack" Set includes the ORIGINAL Set of 4 Universal Folding/Reduction dies and my TWO "Stabilizer"/Reduction dies for the US Quarter, Half Dollar, Morgan Dollar, and the American Silver Eagle!


Here’s what you’ll receive when you purchase this Set:

DIE # 1: This universal folding/reduction die has an opening of 1.625" on one side and 1.5" on the other side.
DIE # 2: This universal folding/reduction die has an opening measuring 1.4" on one side, and 1.3" on the other side
DIE # 3: This universal folding/reduction die has an opening measuring 1.2" on one side, and 1.1" on the other side,
DIE #4: This universal folding/reduction die also has an opening measuring 1.2" on one side, and 1.1" on the other side, but this die has the shallower 25° of taper on the inside of the die faces to give larger coin rings the “fat tire” look.

DIE # 5: The U.S. .25¢ / .50¢ "STABILIZING", FOLDING & REDUCTION DIE:
" .25¢ " side is machined to completely stabilize and fold any US Quarter
" .50¢ " side is machined to completely stabilize and fold any US Half Dollar


DIE # 6: The U.S. MORGAN $1.00 / A.S.E. "STABILIZING", FOLDING & REDUCTION DIE:
" $1." side is machined to completely stabilize and perfectly fold any Morgan/Peace Dollar
"A.S.E." side is machined to completely stabilize and fold any American Silver Eagle.


*** NOTE *** (Dies #5 and #6 listed above can also be used with other similar-sized coins that fit inside as a folding and reduction die)


Here are a few of the many reviews and messages that I have received from folks regarding these coin ring tools:

* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars


* "I love his dies and folding cones! Will definitely keep buying from coinringusa!"
Holly T on Aug 23, 2016
5 out of 5 stars


* "After purchasing the 0.9 and 1.0 dies a few Months ago, I went ahead and got the 1.3, 1.4 and 1.5, 1.6 dies to complete my set. I will tell you right now Martin makes quality products. They are not only beautiful but they work fantastic. A must have! Customer service is also excellent. Thanks Martin for improving my hobby. I will be a return customer."
Brendan "BConn" on Jul 12, 2016
5 out of 5 stars


* “My first purchase from CoinRingUSA, Martin is AWESOME!!! The best online buying experience I've ever had. He knows his stuff and his products are of highest quality! Buying: He designs and improves his products with the craftsman in mind. I will be purchasing "extrusions dies" from him when they are in stock. I wish I could give six stars!”
Dave Dietrich on Jul 4, 2016
5 out of 5 stars


* "The BEST reduction dies out there. Please take a look at his other items as well. They are fantastic! He is also a great seller, ships quick, and is very responsive. He also has great instructional videos." --- Michael B.



*** Here's why you should pick up your coin ring tools from our CoinRingUSA® Shop:


1) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2) The level of quality of my tools is not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a very smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces. Hardened stainless steel also offers the highest level of rust resistance; so no more rusty or pitted dies!

3) Most of the Coin Ring Center Punch kits that people own are sized to punch a center hole into any US Quarter, US Half Dollar, and the Morgan/Peace Silver Dollar; so the 2 new "Stabilizer" Reduction Dies that I personally designed are a perfect complement to any coin ring center punch kit that you may already own.

4) Each die has also been precision engraved with the corresponding size opening for easy identification, and they can be used along with the New and Improved Universal Stabilizer Folding Cones or the Delrin bearing balls to fold the coins; while leaving no marks or scratches, thus preserving the detail on the inside of the coin.

5) My reduction dies are pitched at the optimal degree of angle of 17° degrees to allow for easy folding, reducing, and for making the best-looking coin rings without sacrificing any of the coins' detail.

6) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

7) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

8) All of my coin ring-making tools are 100% guaranteed

9) Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Here's a few of the many complements that folks have sent me regarding my 2 "Stabilizer" Reduction Dies:

--- "These new stabilizer dies work like a dream! I'm an engineer by trade and I can say that the quality, fit, and finish on these dies are some of the best that I have seen in coin ring tools. The engraved markings are a really nice feature as well, thanks Martin!" --- Richard J.

--- "These new Dies work perfectly at getting an even and level fold in the coin. I love the fact that each of the dies can allow me to fold over two different types of coins. I'm very pleased overall and even more pleased with the fast shipping. These are a truly a must-have for anyone that makes coin rings." --- Susan C.

--- "Thanks Martin, your dies are high quality, and you even use them to make coin rings, unlike other sellers that just machine the dies. I'll keep you posted on my progress, and I really like your YouTube videos as well. Thanks again!" --- Doug R.


The other 4 Universal Reduction Dies in this Set are used to fold and reduce ANY Foreign or US coin, token, or medallion ranging in size from 1.6" inches, (40.64mm) in outer diameter; down to 1." inch, (25.4mm) in outer diameter.


For video tutorials on these reduction dies, copy and paste the links below into your web browser:

https://www.youtube.com/watch?v=Va1Po1xV_6M

https://www.youtube.com/watch?v=fmQo9etqD4I



====================================



Using the 2 new "Stabilizer" Reduction Dies, you can now make a level and straight first initial fold to the specific coins listed above. This is possible because the coins’ outer edge is making complete contact with the sides of the inner straight wall design at the top of each side of the die. These two "Stabilizer" Reduction Dies are a perfect compliment to my existing set of improved-upon 4 Universal Reduction Dies or to any other reduction dies that you may already own; as those dies are needed to further fold and reduce the coins to the final size and shape you are looking for.


Copy and paste the following address into your internet browser to watch a YouTube video using these dies:
https://www.youtube.com/watch?v=YnYdq59pOFY



Buying the right reduction dies the first time around is key; here's a great article on what to look for when buying them. You can find that article here:
http://coinringusablog.com/2015/09/11/4-things-to-look-for-when-buying-reduction-dies-to-make-coin-rings/



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for the latest updates, or by clicking the link directly here: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit:
CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** SAFETY FIRST ***
- Always wear safety glasses.
- Keep fingers, long hair, and loose clothing away from any pinch points on the die.
- Make sure to anneal, (heat, then quench) the coin often as you're working it.



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

That’s why all CoinRingUSA® brand of "stabilizer"/folding/reduction dies are precision-smoothed, buffed, and then hand-polished to a superior finish on the inside die walls using a multi-step process that results in the most consistent and effective folding and reduction of any coin to make into a coin ring on the market. These dies even leave a polished finish to the edges of the ring, (see the last photo in this listing for reference.)


This "6-Pack" Set includes the ORIGINAL Set of 4 Universal Folding/Reduction dies and my TWO "Stabilizer"/Reduction dies for the US Quarter, Half Dollar, Morgan Dollar, and the American Silver Eagle!


Here’s what you’ll receive when you purchase this Set:

DIE # 1: This universal folding/reduction die has an opening of 1.625" on one side and 1.5" on the other side.
DIE # 2: This universal folding/reduction die has an opening measuring 1.4" on one side, and 1.3" on the other side
DIE # 3: This universal folding/reduction die has an opening measuring 1.2" on one side, and 1.1" on the other side,
DIE #4: This universal folding/reduction die also has an opening measuring 1.2" on one side, and 1.1" on the other side, but this die has the shallower 25° of taper on the inside of the die faces to give larger coin rings the “fat tire” look.

DIE # 5: The U.S. .25¢ / .50¢ "STABILIZING", FOLDING & REDUCTION DIE:
" .25¢ " side is machined to completely stabilize and fold any US Quarter
" .50¢ " side is machined to completely stabilize and fold any US Half Dollar


DIE # 6: The U.S. MORGAN $1.00 / A.S.E. "STABILIZING", FOLDING & REDUCTION DIE:
" $1." side is machined to completely stabilize and perfectly fold any Morgan/Peace Dollar
"A.S.E." side is machined to completely stabilize and fold any American Silver Eagle.


*** NOTE *** (Dies #5 and #6 listed above can also be used with other similar-sized coins that fit inside as a folding and reduction die)


Here are a few of the many reviews and messages that I have received from folks regarding these coin ring tools:

* "A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars


* "I love his dies and folding cones! Will definitely keep buying from coinringusa!"
Holly T on Aug 23, 2016
5 out of 5 stars


* "After purchasing the 0.9 and 1.0 dies a few Months ago, I went ahead and got the 1.3, 1.4 and 1.5, 1.6 dies to complete my set. I will tell you right now Martin makes quality products. They are not only beautiful but they work fantastic. A must have! Customer service is also excellent. Thanks Martin for improving my hobby. I will be a return customer."
Brendan "BConn" on Jul 12, 2016
5 out of 5 stars


* “My first purchase from CoinRingUSA, Martin is AWESOME!!! The best online buying experience I've ever had. He knows his stuff and his products are of highest quality! Buying: He designs and improves his products with the craftsman in mind. I will be purchasing "extrusions dies" from him when they are in stock. I wish I could give six stars!”
Dave Dietrich on Jul 4, 2016
5 out of 5 stars


* "The BEST reduction dies out there. Please take a look at his other items as well. They are fantastic! He is also a great seller, ships quick, and is very responsive. He also has great instructional videos." --- Michael B.



*** Here's why you should pick up your coin ring tools from our CoinRingUSA® Shop:


1) I don't believe in cutting corners; so my up-front costs are higher than anyone else's in order to be able to bring you the best quality material and craftsmanship available in coin ring-making tools.

2) The level of quality of my tools is not duplicated elsewhere; as I use the highest quality Hardened Stainless Steel that is precision CNC-machined to the finest standards by expert machinists and hand polished to a very smooth finish; unlike most other competitors' dies that have rough finishes to the inner die faces. Hardened stainless steel also offers the highest level of rust resistance; so no more rusty or pitted dies!

3) Most of the Coin Ring Center Punch kits that people own are sized to punch a center hole into any US Quarter, US Half Dollar, and the Morgan/Peace Silver Dollar; so the 2 new "Stabilizer" Reduction Dies that I personally designed are a perfect complement to any coin ring center punch kit that you may already own.

4) Each die has also been precision engraved with the corresponding size opening for easy identification, and they can be used along with the New and Improved Universal Stabilizer Folding Cones or the Delrin bearing balls to fold the coins; while leaving no marks or scratches, thus preserving the detail on the inside of the coin.

5) My reduction dies are pitched at the optimal degree of angle of 17° degrees to allow for easy folding, reducing, and for making the best-looking coin rings without sacrificing any of the coins' detail.

6) My customers always come first! I can always be reached through Etsy, by e-mail directly, or by leaving me a comment on my blog site.

7) I have a passion for both making coin rings as well as creating the highest quality coin ring-making tools on the market today. That's why I've created a platform where people can go to get their questions answered about all things coin rings; as well as ask questions and even leave suggestions. Please visit my blog site at: CoinRingBlog.com for coin ring making tips, tricks, and tool updates.

8) All of my coin ring-making tools are 100% guaranteed

9) Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!



Here's a few of the many complements that folks have sent me regarding my 2 "Stabilizer" Reduction Dies:

--- "These new stabilizer dies work like a dream! I'm an engineer by trade and I can say that the quality, fit, and finish on these dies are some of the best that I have seen in coin ring tools. The engraved markings are a really nice feature as well, thanks Martin!" --- Richard J.

--- "These new Dies work perfectly at getting an even and level fold in the coin. I love the fact that each of the dies can allow me to fold over two different types of coins. I'm very pleased overall and even more pleased with the fast shipping. These are a truly a must-have for anyone that makes coin rings." --- Susan C.

--- "Thanks Martin, your dies are high quality, and you even use them to make coin rings, unlike other sellers that just machine the dies. I'll keep you posted on my progress, and I really like your YouTube videos as well. Thanks again!" --- Doug R.


The other 4 Universal Reduction Dies in this Set are used to fold and reduce ANY Foreign or US coin, token, or medallion ranging in size from 1.6" inches, (40.64mm) in outer diameter; down to 1." inch, (25.4mm) in outer diameter.


For video tutorials on these reduction dies, copy and paste the links below into your web browser:

https://www.youtube.com/watch?v=Va1Po1xV_6M

https://www.youtube.com/watch?v=fmQo9etqD4I



====================================



Using the 2 new "Stabilizer" Reduction Dies, you can now make a level and straight first initial fold to the specific coins listed above. This is possible because the coins’ outer edge is making complete contact with the sides of the inner straight wall design at the top of each side of the die. These two "Stabilizer" Reduction Dies are a perfect compliment to my existing set of improved-upon 4 Universal Reduction Dies or to any other reduction dies that you may already own; as those dies are needed to further fold and reduce the coins to the final size and shape you are looking for.


Copy and paste the following address into your internet browser to watch a YouTube video using these dies:
https://www.youtube.com/watch?v=YnYdq59pOFY



Buying the right reduction dies the first time around is key; here's a great article on what to look for when buying them. You can find that article here:
http://coinringusablog.com/2015/09/11/4-things-to-look-for-when-buying-reduction-dies-to-make-coin-rings/



Be sure to Subscribe to my YouTube channel located under "CoinRingUSA" for the latest updates, or by clicking the link directly here: youtube.com/CoinRingUSA


To see the other coin ring-making tools available; be sure to visit:
CoinRingUSA.com


Thanks, and here's to your coin ring-making success!



*** SAFETY FIRST ***
- Always wear safety glasses.
- Keep fingers, long hair, and loose clothing away from any pinch points on the die.
- Make sure to anneal, (heat, then quench) the coin often as you're working it.



*** Shipping:

This set will be shipped by USPS Priority Mail with Signature Confirmation for U.S. residents.

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted

Reviews

5 out of 5 stars (1,379)

You may also like