Custom Wall Mount Jewelry Cabinet for efficient storage of rings, necklaces, and earrings

$3,250.00

Free shipping to United States
Please select a material
Rare find — there's only 1 of these in stock.

Item details

Handmade

Material

Fabric, Metal, Wood

Dimensions

Length: 21.25 Inches; Width: 17 Inches; Height: 2.5 Inches

This wall mount jewelry cabinet is perfect for storage a large amount of jewelry in a small amount of space. Its a low profile artistic cabinet. This box cabinet will hold up 46 rings, 56 pairs of earrings, and at least 20 necklaces/bracelets ( necklaces can be doubled up on hooks for storage of 40).

The lacquer finish gives off a beautiful sheen that is soft to the touch. All of the back walls of the cabinet are lined with Ultrasuede to protect your jewelry. The brass hinges are very sturdy, accurate, and allow the doors to swing completely open for easy viewing and access to your jewelry. The discreet abalone inlay door knob allows access to the doors by twisting left or right.

This piece can be custom made to you specification such as wood type and depth/size. Also, necklace, earring, and ring capacities can be modified. Lead time for a custom piece can be up to 3 months.

Includes 12" wall mount bracket for easy install.

Dimensions: 21.25″ (54 cm) x 17″ (43 cm) x 2.5″ (6.35 cm)

Wood: Camphor-wood; Curly Cherry cabinet, Curly Maple earring racks. See above photos for wood choices.

An original design by Eugene F Watson
Copyright 2019 Watson Woodworks, LLC
This wall mount jewelry cabinet is perfect for storage a large amount of jewelry in a small amount of space. Its a low profile artistic cabinet. This box cabinet will hold up 46 rings, 56 pairs of earrings, and at least 20 necklaces/bracelets ( necklaces can be doubled up on hooks for storage of 40).

The lacquer finish gives off a beautiful sheen that is soft to the touch. All of the back walls of the cabinet are lined with Ultrasuede to protect your jewelry. The brass hinges are very sturdy, accurate, and allow the doors to swing completely open for easy viewing and access to your jewelry. The discreet abalone inlay door knob allows access to the doors by twisting left or right.

This piece can be custom made to you specification such as wood type and depth/size. Also, necklace, earring, and ring capacities can be modified. Lead time for a custom piece can be up to 3 months.

Includes 12" wall mount bracket for easy install.

Dimensions: 21.25″ (54 cm) x 17″ (43 cm) x 2.5″ (6.35 cm)

Wood: Camphor-wood; Curly Cherry cabinet, Curly Maple earring racks. See above photos for wood choices.

An original design by Eugene F Watson
Copyright 2019 Watson Woodworks, LLC

Shipping & returns

Get it fast! Ready to ship in 1 business day.
From Pueblo, CO
Free shipping to United States
Returns and exchanges accepted
Exceptions may apply.

Meet watswood

Eugene Watson

Eugene Watson

Pueblo, Colorado

This seller usually responds within a few hours.

The finish I use is a CAB acrylic lacquer from Sherwin Williams with the vinyl sealer base coat. I often use paste wax with steel wool to make the piece feel better to the touch and to bring out the sheen.
Very little care if any is necessary aside from removing dust occasionally. You can use an air canister if you like. You may also use any wax type polish to bring out the sheen. If alcohol or a chemical gets on the piece, wipe off immediately. Letting a chemical sit will ruin the finish.
The leather lining I use is a synthetic suede called Ultrasuede. It can be wiped clean with a damp cloth.
Custom orders are accepted based on wood type only, unless a large quantity is desired. My boxes are all made in batches and are not conducive to size changes. I can do monograms as seen in this listing:
https://www.etsy.com/listing/492097469/personalized-monogram-engraving-addon?ref=shop_home_active_3

Reviews

5 out of 5 stars rated 5 out of 5 stars by 213 customers