ORIGINAL Coin Ring Edge Rounding, Polishing and Finishing Kit
Materials: Precision made Stainless Steel, Abrasion Resistant Rubber
*** The ORIGINAL CoinRingUSA® Coin Ring Rounding, Finishing, & Polishing Mandrel Set to Remove Flat, Unfinished, or Damaged Edges of Coin Rings ***
Now you can obtain the most rounded and uniform high-quality smooth, shiny, and even finish to the edges of your coin rings by quickly getting rid of those unsightly, uneven, flat edges with this new tool.
This is the original mandrel set put out by myself that has been tested, tried and true!
No more having to use nail buffing files, sanding by hand, using steel round files or de-burring tools to finish your rough coin ring edges... nothing else performs better in completing this critical aspect of coin ring-making!
* You can also use this tool to both hold and sand off the "Coin Ring Lips"; or the lip that's underneath the reeded side of the coin (if you choose to) for a more uniform look. The abrasion-resistant rubber mandrels also naturally protects the coins' detail from damage while you're working it, so there's no need to use a screw to hold the coin in place, which could cause damage to the coins' surface... it's like having multiple tools-in-one!
(You can also re-apply reeds to both sides of your coin rings by using the newest tool that I developed called the "Re-REEDer"; which can be found below):
NEW POLISHING MANDREL ARBOR KIT OPTIONS:
Now you can remove the extra time it takes to switch over the steel arbor whenever you have to go to another size mandrel cone! Simply add either ONE EXTRA arbor from the drop down list, or add TWO EXTRA Arbors from the drop down list to your kit!
*** Here are just some of the testimonials and reviews that folks have left after using this new coin ring-making tool: ***
"I can't believe I lived without these for so long. Many uses beside finishing rings. Thanks Martin."
Jeanne Godar on Jan 31, 2017
5 out of 5 stars
"So you know how you make a cool coin ring then spend maybe an hour or so sanding it? (Depending on how high of a grade you want to go of course..) this awesome coin finishing kit whittles that time down to like 5-10 minutes. Simply amazing. Thanks again Martin for some BA tools!"
gsmcgee12 on Nov 17, 2016
5 out of 5 stars
"Nice set to give that finished look to your rings."
Classic Coin Rings on Nov. 8, 2016
5 out of 5 stars
"Martin is fantastic with customer service before, during, and after the sale. I received this Finishing & Polishing mandrel set and I can't say enough good things about them. It has taken my work to a professional level and I don't know how I did without them. Thanks." --- Ray S.
"This is the best thing I have purchased in coin ring making. Thank you for such an amazing product!" --- Larry M.
"This fills a niche not previously addressed, and is almost a necessity to produce a quality ring!" --- Dale C.
This unique set of different-sized Finishing and Polishing Mandrels are designed to give your coin rings that professional-looking quality finish on the otherwise rough flat edge that was originally the inner part of the coin that is so hard to achieve and will finish and polish any coin ring from an approximate US size of 5, up to an approximate US size of 14.
The Kit comes with a precision German-made stainless steel shank complete with 3 interchangeable uniquely-designed abrasion resistant mandrel cones in the following sizes:
Small --- (fits ring sizes of approx. 5-8),
Medium --- (fits ring sizes of approx. 8.5-11),
Large --- (fits ring sizes of approx. 11-14).
To change from one size to another, you simply hold the tapered rubber mandrel with one hand and twist the stainless steel shank with the other.... no tools are necessary!
The advantage to using the finishing and polishing mandrels is that as the ring is held on tightly to the tapered mandrel that's spinning while being attached to your power drill; it acts much like a small lathe, providing a much more uniform finish to the ring than can be achieved with either hand-sanding, using a nail buffing file, a steel round-file, or even a small rotary tool such as a Dremel.
*** TO BEGIN ***
1.) Determine which size Polishing Tapered Mandrel fits your completed coin ring, and slide the coin ring on to it.
2.) Place the Mandrel bit into your power drill and tighten.
3.) Adjust the coin ring until it’s well-balanced with no “wobbling” on the Mandrel with your power drill on, and then expand the Mandrel by tightening the Stainless Steel Phillips head set screw at the top which holds the coin ring securely in place.
4.) Begin on the outer edge of the coin ring with the coarser 200 Grit sandpaper and work your way around to the inner edge of the coin ring; making sure that ONLY the corner tip of the sandpaper is making contact with the unfinished inner, top, and outer edges of your coin ring to prevent damage to the rings' detail. Take your time with this step; especially when you're first starting out.
5.) Continue to work the inner, top, and outer edges of the whichever side using the finer grits of sandpaper as you go; finishing with “0000” Steel Wool. You can also use the steel wool and LIGHTLY go over the inner and the outer detail of the coin ring before you either polish it with a jeweler's cloth or after you’ve put a patina (antique-looking) finish on the ring.
6.) The final step is to use a jeweler’s cloth to both buff and finish-polish your coin ring.
Your ring will now have a highly-smoothed, rounded, and polished edge on either the REEDED or the NON-REEDED side that is not often seen on coin rings! (See the 3rd and the 5th listing photo for two examples of finished and polished coin rings using this technique).
OTHER MATERIALS NEEDED: a power drill, 3 different grits of sandpaper (I use 200 Grit, 500 Grit, and 1000 Grit sandpaper), some “0000” Steel Wool, and a jeweler’s polishing cloth to complete this process. Those items can be purchased from Amazon.com; at a big box store like Home Depot, or any local hardware store inexpensively.
*** Make sure that your power drill can accept a 1/4" size shank in order to be able to use this tool.
* Click on or copy and paste the link below for a video tutorial on using this Finishing and Polishing Mandrel Set:
* You can follow me on my YouTube channel as well at: youtube.com/CoinRingUSA
(Coin rings and power drill are not included and are used for reference only.)
Thanks, and here's to your coin ring-making success!
*** SAFETY FIRST ***
- Always wear safety glasses and work gloves.
- Always use caution when working with any power tools and electricity.
- Keep fingers, long hair, and loose clothing away from any fast moving parts.
This set will be shipped by USPS Priority Mail
There was a problem calculating your shipping. Please try again.
1,617 reviews5 out of 5 stars
These are a great way to polish rings with the corded or cordless drill. You can polish the scratches and sanding marks from the edges or if you want to make a fully smoothed out ring. There’s a utube vid on it. They are quality made. Transaction was smooth and delivery was quick. This is my second set simply because now I can have the cones set up for different sizes rings. Sometimes I have to reverse the rubber cones to fit tighter so now I already have it set up. Not that it’s difficult to do, it’s just a little time consuming.
The Polishing mandrel is absolutely perfect for working the coin ring to the perfection I want,good job, Delivery fast and furious, great job 👍
The coin ring mandrel for the drill makes the final polishing and patina work sooooo much faster. Worth every penny.
delivered quick, great guy to work with, very professional and excellent mandrels to use for coin ring making
Photos from reviews