Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

Rotating Tool Stand Organizer Lazy Susan

Like this item?

Add it to your favorites to revisit it later.
Favorite
Request a custom order and have something made just for you.

Description

(Tools are shown for display only, this listing is for the rotating tool shelf only.)

See it in action: <https://vimeo.com/157803201>.

This is a rotating tool stand with slots and holes for tools of various sizes, made with 1/4" Baltic birch. There is also a hollow in the top shelf for storing things like 16" rulers. It weighs about 7 pounds and has a smooth bottom. The base is 400 mm / 15.75 inches in diameter, the top shelf is 385 mm / 15 1/8 inches high (measured from the tabletop).

The tops of the shelves (measured from the top of the base) are approximately:
155mm
260mm
365mm

I say "approximately" because we buy Baltic birtch from different distributors and the thickness can vary between 4.5mm to 5.5mm.

The fittings on the top shelf are 5mm and 7.5mm diameter holes.

The fittings on the 2nd shelf down:
- Sets for Metric and SAE Allen wrenches with a slight bit of padding to make it easy to remove and return the wrench:
- Metric: 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12
- SAE: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16
- 12mm and 7.5mm diameter sets for general tools

The fittings on the third shelf down, or the bottom shelf:
- 17.75 mm round fittings for tools
- 8mm and 13mm slots for box wrenches
- a 30mm wide slot for pliers and larger, leaning tools

The base has room for larger instruments like squares and levels that are not easy to suspend.

Custom shelves are available, I can replace the wrench slots with more holes for screwdrivers, add a second set of Allen wrench holders, or make other changes for between $10 and $60 depending on the complexity.

The stand comes as a complete kit as shown in the fifth photo and includes printed instructions. All holes are pre-drilled, including the end holes in the support columns. The only tool needed for assembly is a Phillips screwdriver, should take 10-15 minutes depending on how good you are with a screwdriver.

I make these kits in Pittsburgh, PA, using my Lasersaur laser cutter and hand tools. Fasteners are from American manufacturing supply firms.

Dimensions: diameter is 15.5" / 40cm, the height of the top shelf is 14.5" / 37cm.

If you want to save a few bucks, I'm also offering cosmetically damaged stands at a discount. These work just fine but might have surface splitting or a clipped edge of the base panel as shown in the photos.
(Tools are shown for display only, this listing is for the rotating tool shelf only.)

See it in action: <https://vimeo.com/157803201>.

This is a rotating tool stand with slots and holes for tools of various sizes, made with 1/4" Baltic birch. There is also a hollow in the top shelf for storing things like 16" rulers. It weighs about 7 pounds and has a smooth bottom. The base is 400 mm / 15.75 inches in diameter, the top shelf is 385 mm / 15 1/8 inches high (measured from the tabletop).

The tops of the shelves (measured from the top of the base) are approximately:
155mm
260mm
365mm

I say "approximately" because we buy Baltic birtch from different distributors and the thickness can vary between 4.5mm to 5.5mm.

The fittings on the top shelf are 5mm and 7.5mm diameter holes.

The fittings on the 2nd shelf down:
- Sets for Metric and SAE Allen wrenches with a slight bit of padding to make it easy to remove and return the wrench:
- Metric: 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12
- SAE: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16
- 12mm and 7.5mm diameter sets for general tools

The fittings on the third shelf down, or the bottom shelf:
- 17.75 mm round fittings for tools
- 8mm and 13mm slots for box wrenches
- a 30mm wide slot for pliers and larger, leaning tools

The base has room for larger instruments like squares and levels that are not easy to suspend.

Custom shelves are available, I can replace the wrench slots with more holes for screwdrivers, add a second set of Allen wrench holders, or make other changes for between $10 and $60 depending on the complexity.

The stand comes as a complete kit as shown in the fifth photo and includes printed instructions. All holes are pre-drilled, including the end holes in the support columns. The only tool needed for assembly is a Phillips screwdriver, should take 10-15 minutes depending on how good you are with a screwdriver.

I make these kits in Pittsburgh, PA, using my Lasersaur laser cutter and hand tools. Fasteners are from American manufacturing supply firms.

Dimensions: diameter is 15.5" / 40cm, the height of the top shelf is 14.5" / 37cm.

If you want to save a few bucks, I'm also offering cosmetically damaged stands at a discount. These work just fine but might have surface splitting or a clipped edge of the base panel as shown in the photos.

Reviews

5 out of 5 stars
(2)

Payments

Secure options
  • Visa
  • Mastercard
  • American Express
  • Discover
  • Paypal
  • GiftcardAccepts Etsy Gift Cards and Etsy Credits
Etsy keeps your payment information secure. Etsy shops never receive your credit card information.
We generally prefer payment in advance for Etsy items. If you want a custom item designed or built we can work out a payment agreement depending on the scope and amount of work.

Returns & exchanges

If something is broken, parts are missing or lost in shipping, we'll replace it.

If you break a part during assembly let us know, we can replace it for cost of postage.

We cannot take refunds on kits that have been assembled but we can try and fix things if there's something you don't like.

Shipping policies

Currently we only ship to the US, but we are able to ship FedEx Ground and UPS Ground if needed. We recycle packing material when possible but always use new cardboard boxes. We always ship with a tracking number and can add signature confirmation or insurance if you like.

Additional policies

We're happy to do bulk / wholesale orders with a partial prepayment on a negotiated discount.

We're also happy to do custom work. If you see one of our products and think, "that's almost what I want, could we just change this one bit?" please drop us email and let us know. What you think is an expensive custom request could be for something we've already developed but not put on the market.

Rotating Tool Stand Organizer Lazy Susan

Ask a question

$75.00

Almost gone. There's only 1 left.

Overview

  • Handmade item
  • Surface quality: Best Quality
  • Material: Baltic Birch Plywood
  • Made to order
  • Feedback: 2 reviews
  • Favorited by: 112 people
  • Gift message available
This shop accepts Etsy gift cards

Shipping & returns

Ready to ship in 3–5 business days
From Pittsburgh, Pennsylvania

What’s wrong with this listing?

The first thing you should do is contact the seller directly.

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case.

Report a problem with an order

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. We suggest contacting the seller directly to respectfully share your concerns.

If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Review how we define handmade, vintage and supplies

See a list of prohibited items and materials

Read our mature content policy

The item for sale is…