SALE! Coin Ring Repair and Finish KIT for Removing Rough Edges, Lipped-Edges; and Straightening Wobbly Rings

CoinRingUSA

Have a question about the item? Send a message.

This seller usually responds within 24 hours.

SALE! Coin Ring Repair and Finish KIT for Removing Rough Edges, Lipped-Edges; and Straightening Wobbly Rings

Message Seller

$37.95

Please select a quantity

Item details

Materials

Hardened and Wear Resistant Stainless Steel, Abrasion Resistant Rubber

At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

Now you can repair and round off your flat, rough coin ring edges with this 2-in-1 "Fix-and-Finish" Kit!

* You can also use this tool to both hold and remove the "Coin Ring Lips"; or the lip that's underneath the reeded side of the coin (if you choose to) for a more uniform look. The abrasion-resistant rubber mandrels also naturally protects the coins' detail from damage while you're working it, so there's no need to use a screw to hold the coin in place, which could cause damage to the coins' surface... it's like having multiple tools-in-one!


* Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!


(You can also re-apply reeds to both sides of your coin rings by using the newest tool that CoinRingUSA® developed called the "Re-REEDer"; which can be found below):

https://www.etsy.com/listing/512367099/new-re-reeder-coin-ring-die-used-to-add?ref=shop_home_active_1



Kit comes complete with the following:

1.) A Repair Die made from a solid piece of hardened wear-resistant stainless steel. This piece is useful, as a lot of hydraulic shop presses have a ram that is not big enough to cover your coin ring.

2.) A piece of impact-resistant urethane pad (red-colored or black, depending on availability), to help protect the edges of your coin rings during the forging process.

3.) A set of different-sized Finishing and Polishing Mandrels designed to give your coin rings that professional-looking rounded-off finish to the rough flat edge that was originally the inner edge of the center punched hole of the coin, and to remove the lip of the coin located underneath the reeded side, (if you choose to do so).



*** Here are just some of the reviews that I've received from folks: ***


"A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



"I can't believe I lived without these for so long. Many uses beside finishing rings. Thanks Martin."
Jeanne Godar on Jan 31, 2017
5 out of 5 stars


"So you know how you make a cool coin ring then spend maybe an hour or so sanding it? (Depending on how high of a grade you want to go of course..) this awesome coin finishing kit whittles that time down to like 5-10 minutes. Simply amazing. Thanks again Martin for some BA tools!"
gsmcgee12 on Nov 17, 2016
5 out of 5 stars


* "Nice set to give that finished look to your rings."
Classic Coin Rings on Nov. 8, 2016
5 out of 5 stars



* For the full description listing of the Coin Ring Repair Die Kit, click below: https://www.etsy.com/listing/235753667/wobbly-ring-repair-kit-to-fix-bent-and?ref=shop_home_listings


For a video on this technique, click here: http://youtu.be/4NKjGpiFNw4


* For the full description listing of the Coin Ring Rounding and Finishing Kit, click below:
https://www.etsy.com/listing/267370914/new-roundingpolishing-tool-for-the-rough?ref=shop_home_listings

To see how easy this method is to complete, click here: https://www.youtube.com/watch?v=qv5MLqB9e4g



To receive my Coin Ring Making Tips, Tricks, and Tool updates, please visit: CoinRingBlog.com and click on the Blue "Follow" tab on the lower left-hand side to get the latest updates.

Be sure to Subscribe to my YouTube channel found under "CoinRingUSA" for new video updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


(Coins pictured are not included and used for reference only.)


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.
At CoinRingUSA®, we uphold the highest standards by sourcing only the best quality material and highly skilled craftsmanship when making our coin ring tools.

Now you can repair and round off your flat, rough coin ring edges with this 2-in-1 "Fix-and-Finish" Kit!

* You can also use this tool to both hold and remove the "Coin Ring Lips"; or the lip that's underneath the reeded side of the coin (if you choose to) for a more uniform look. The abrasion-resistant rubber mandrels also naturally protects the coins' detail from damage while you're working it, so there's no need to use a screw to hold the coin in place, which could cause damage to the coins' surface... it's like having multiple tools-in-one!


* Why spend less or the same amount for inferior dies and coin ring tools elsewhere? Buy from CoinRingUSA® and get the best in quality tooling!


(You can also re-apply reeds to both sides of your coin rings by using the newest tool that CoinRingUSA® developed called the "Re-REEDer"; which can be found below):

https://www.etsy.com/listing/512367099/new-re-reeder-coin-ring-die-used-to-add?ref=shop_home_active_1



Kit comes complete with the following:

1.) A Repair Die made from a solid piece of hardened wear-resistant stainless steel. This piece is useful, as a lot of hydraulic shop presses have a ram that is not big enough to cover your coin ring.

2.) A piece of impact-resistant urethane pad (red-colored or black, depending on availability), to help protect the edges of your coin rings during the forging process.

3.) A set of different-sized Finishing and Polishing Mandrels designed to give your coin rings that professional-looking rounded-off finish to the rough flat edge that was originally the inner edge of the center punched hole of the coin, and to remove the lip of the coin located underneath the reeded side, (if you choose to do so).



*** Here are just some of the reviews that I've received from folks: ***


"A galaxy of stars wouldn't be enough to select from to reflect in how pleased I am with these new tools. Precision dies and cones and mandrel's epic quality and speedy shipping. I will continue to buy for sure."
Eric Guthrie on Apr 11, 2017
5 out of 5 stars



"I can't believe I lived without these for so long. Many uses beside finishing rings. Thanks Martin."
Jeanne Godar on Jan 31, 2017
5 out of 5 stars


"So you know how you make a cool coin ring then spend maybe an hour or so sanding it? (Depending on how high of a grade you want to go of course..) this awesome coin finishing kit whittles that time down to like 5-10 minutes. Simply amazing. Thanks again Martin for some BA tools!"
gsmcgee12 on Nov 17, 2016
5 out of 5 stars


* "Nice set to give that finished look to your rings."
Classic Coin Rings on Nov. 8, 2016
5 out of 5 stars



* For the full description listing of the Coin Ring Repair Die Kit, click below: https://www.etsy.com/listing/235753667/wobbly-ring-repair-kit-to-fix-bent-and?ref=shop_home_listings


For a video on this technique, click here: http://youtu.be/4NKjGpiFNw4


* For the full description listing of the Coin Ring Rounding and Finishing Kit, click below:
https://www.etsy.com/listing/267370914/new-roundingpolishing-tool-for-the-rough?ref=shop_home_listings

To see how easy this method is to complete, click here: https://www.youtube.com/watch?v=qv5MLqB9e4g



To receive my Coin Ring Making Tips, Tricks, and Tool updates, please visit: CoinRingBlog.com and click on the Blue "Follow" tab on the lower left-hand side to get the latest updates.

Be sure to Subscribe to my YouTube channel found under "CoinRingUSA" for new video updates, or click on the following link to go directly there: youtube.com/CoinRingUSA


(Coins pictured are not included and used for reference only.)


Thanks, and here's to your coin ring-making success!



*** Shipping:

This set will be shipped by USPS Priority Mail

Please Note for International orders: If you are ordering from outside the United States, your package may be delayed at Customs, depending on your particular country's policies for inbound U.S. shipments. You will need to inquire with your local Post Office or Mail Carrier Service for further delivery information. Customers ordering from outside of the United States are responsible for any duties, import taxes and/or brokerage fees that your country might impose upon delivery. These charges are not included in the cost of shipping and handling of your order.

Shipping & returns

Get it fast! Ready to ship in 1–3 business days.
From United States
Returns and exchanges accepted

Reviews

5 out of 5 stars (1,379)

You may also like