Whoa! You can't favorite your own shop.

Whoa! You can't buy your own item.

Whoa! You can't favorite your own item.

Whoa! You can't add your own item to a list.

Add this item to a treasury!

Close
You don't have any treasuries yet. Enter a title below to create one.
Close

This item has been added.

View your treasury.

Like this item?

Add it to your favorites to revisit it later.
Request a custom order and have something made just for you.
Lacing through 8 silver grommets in the center front, center back, and on each side with lovely black satin ribbons, this garter belt is fully adjustable for just about every figure. Boned with a lightweight polyester boning for strength and sability. The belt has 4 garters (two in the front, two in the back) with metal sliders and large black and silver classic garter grips. Just above the rump sit two sassy little boned bat wings fashioned out of black PVC. The entire belt is lined with Kona Cotton for comfort and stability.

To finish the look check out the bat wing neck corset. Super cute!

Garter belt sizes include a 2-4" lacing gap at the center front, center back, and sides. Garter belt sizes are based on your HIGH HIP MEASUREMENT (taken at hip-bone level, below your navel but ***above*** your rump) and go as follows:

XS: 27"-30"
S: 31"-34"
M: 35"-38"
L: 39"-42"
XL: 43"-46"
XXL: 47"-50"
XXXL: 51"-54"

Please mention your size preference with purchase. Think you need a custom size? Give me a few extra days to pattern, no extra cost. <3

***This piece can also be made without the garters if you would prefer. Just mention your preference in your "note to seller" with purchase.

Thanks for looking. <3

Hair Credit: Melanie
Makeup Credit: Melanie
Photo Credit: Erik Christensen

***All designs, logos, and photos are property of Idolatre Clothing Co. and MAY NOT be used without specific written permission. Violators will be prosecuted.***

Frequently asked questions about idolatre

Everything I make is handmade from scratch. For real. Many horn sellers on Etsy purchase Party City horns to paint or modify into headpieces, but all of mine are made from the ground up. (If you'd like to see a direct comparison illustrating why handmade is so much better than re-purposed/revamped costume store pieces, check out this picture of a headdress I made when I was just getting into headdress making arts specifically in 2010 with purchased horns: https://www.etsy.com/listing/46369420/maenad-ram-horn-headdress?ref=shop_review vs this same headdress style with horns that were cast from my original sculptures: https://www.etsy.com/listing/60339371/maenad-ram-horn-headdress Way better, right? I thought so, too.)
Post casting there are a variety of tasks performed to ensure you get high quality pieces of art. First, all pour spouts and vents are delicately cut off the pieces. Then seams sanded, & small details replaced that may have been lost during the previous processes. Each piece is inspected for imperfections, and corrected with a dremel. If the pieces are to be mounted on a headband, oblong holes are removed from the base, & the openings are sanded to reduce elastic friction. If the pieces are scheduled to be painted, they would then be primed with a spray primer for best paint adhesion, then coated with acrylic spray paint for their base coat. After 3-6 hours cure time for both spray steps, they are ready for hand painting & mounting. Whew!
I print all my shipping from Etsy directly, so this is not an option. I also will not undervalue a package being shipped internationally as I include insurance for the full value of the package contents. If any invoice is included in the package (even if it is marked as a "gift"), tariffs can still be charged when it is opened and inspected by a customs officer at the border if it looks suspiciously like a purchase, which purchases usually do. As a seller, I can be held responsible legally and FINED for lying on customs forms. The fines for these violations are huge, and I cannot risk that.
I'm sorry, but I do not wholesale my resin components. I sell individual unfinished resin pieces as an egalitarian gesture to individuals who would not otherwise be able to afford a headdress so that they can still purchase something in their price range and create their own magic. Art is my full time job so I know all about wanting wonderful things that cost more than I can afford!

That said, I do offer wholesale discounts on completed headdresses purchased in quantity, so if you're doing a group cosplay, stocking your boutique, or outfitting your theater or dance troupe do not hesitate to ask!
Absolutely! I'm flattered you would want to use my art in the creation of your own. In fact, feel free to use the coupon code PHOTOSHOOT10 at checkout for 10% off your purchase.
Part of the hard work that goes into making visually compelling products is sourcing wonderful materials. This takes a lot of time and effort, and helps my items look unique. If I gave away the sources that I have worked hard to acquire, it would compromise the individualism of my shop. This is actually part of the reason I've evolved my store to make almost all my own components & findings- because if they are purchased from a vendor, people will find that vendor, then all of a sudden 40 copy shops pop up on Etsy attempting to make something suspiciously resembling your products. Needless to say, that it's more than disheartening when you work so hard to develop your own unique designs. So sorry, but I'm not sharing sources.
Nope! The horns and antlers are composed of Smooth Cast 300, a polyurethane resin. Not only that, but they're not cast from real horns or antlers, either. Which means that not only are they more balanced and far lighter weight for a human head/neck than their natural counterparts, they're also symmetrical little works of art for your head that are completely vegan from start to finish. Likewise with the fur- it's all high quality acrylic and animal free.
Sorry, all my prices reflect the time it takes for me to make the items and the cost of materials. This is more than an expensive hobby for me, this is how I make a living.

Cute PVC Corset Bat Wing Garter Belt

$59.00

Only 1 available


Overview

  • Handmade item
  • Materials: vinyl, pvc, metal sliders, polyester boning, rigilene, suspender clips, kona cotton
  • Made to order
  • Ships worldwide from United States
  • Feedback: 1021 reviews
  • Favorited by: 1512 people