Push fit seamless 25cm or 30cm acoustic panel cable duct cover – invisible TV cable for living room walls, cable management

PREMIUM PUSH-FIT CABLE COVERS FOR ACOUSTIC PANELS

Hide TV, HDMI, soundbar, power and other cables neatly between your acoustic panel slats with our push-fit acoustic panel cable covers. Designed for clean, discreet cable management on acoustic slat walls, they conceal unsightly wires for a clean, professional finish — no drilling, screws or adhesive required.

Available in 25cm and 30cm lengths and gap sizes from 10mm–22mm, each cable cover is made to your selected size and features our unique secure locking profile, designed to grip firmly within the panel gap and help prevent the cover from working loose or being pushed out by the cables behind it.

For longer cable runs, our True End-to-End Join uses a discreet joining lip to connect each section neatly to the next without reducing the usable length of the cover — helping create a straight, flush and virtually seamless finish.

WHY CHOOSE GROOVY GIFT?

✓ SECURE LOCKING FIT — Our unique profile is designed to grip securely inside the panel gap, helping prevent the cover from working loose or being pushed out by the cables behind it. Firm enough to stay securely in place, with just enough flex for straightforward fitting and removal.

✓ TRUE END-TO-END JOIN — Our discreet joining lip connects each cover neatly to the next without reducing its usable length. Unlike designs that require one section to sit behind another, each cover provides its full stated 25cm or 30cm coverage, helping maintain a straight, flush finish with a virtually invisible join.

✓ FULL USABLE LENGTH — A 25cm cover provides the full 25cm of usable coverage and a 30cm cover provides the full 30cm. This makes it easier to calculate how many sections you need for your cable run.

✓ PERFECTLY STRAIGHT — Designed to sit neatly between the wooden slats for a clean, professional finish from end to end.

✓ STRENGTHENED CONSTRUCTION — Reinforced for additional rigidity and durability while remaining discreet between your panel slats.

✓ PREMIUM TEXTURED FINISH — A subtle textured surface in your choice of Black, Grey or Beige provides a smart, understated finish between your acoustic panel slats.

✓ NO DRILLING OR ADHESIVE — Simply push the cover into the gap between your slats. Easy to install, remove and reposition without permanent fixings.

✓ THE ORIGINAL GROOVY GIFT DESIGN — Designed in-house and continually refined through thousands of customer sales and real-world feedback.

COLOUR OPTIONS

Available in Black, Grey and Beige, allowing you to choose the option that best complements your acoustic panels.

IMPORTANT: Felt shades can vary between panel manufacturers and production batches. While our Grey and Beige covers are designed to coordinate with commonly used panel colours, we cannot guarantee an exact colour match with the felt on your particular panels.

25CM OR 30CM — WHICH SHOULD I CHOOSE?

Both lengths feature the same secure locking profile and True End-to-End Join, so simply choose whichever best suits your installation.

25cm — A versatile option for shorter cable runs or installations where more flexibility in positioning is useful.

30cm — Ideal for longer cable runs. The additional length means fewer individual sections and fewer joins are required, helping create an even cleaner finished installation.

Need to cover a longer distance? Simply connect additional sections together using the built-in joining lip.

Because our joining system doesn't reduce the usable length of each cover, calculating the quantity you need is simple:

4 × 25cm = 1 metre of coverage
4 × 30cm = 1.2 metres of coverage
10 × 30cm = 3 metres of coverage

CABLE CAPACITY

Suitable for concealing common TV, entertainment and media cables, including:

• HDMI cables
• TV and power cables
• Ethernet/network cables
• USB cables
• Speaker and soundbar cables
• LED/light cables

The available internal space depends on the gap width selected. Wider covers naturally provide more room for thicker cables or multiple cables.

Our covers can accommodate up to approximately 2-4 cables, depending on their individual thickness.

Cable dimensions vary considerably, so please check your cables before ordering. If you're unsure whether your cables will fit, simply send us their approximate dimensions and we'll be happy to advise.

QUICK & EASY INSTALLATION

PUSH. FIT. DONE.

Measure the gap between your wooden slats.
Select the corresponding gap size when ordering.
Position your cables neatly inside the gap.
Push the cable cover firmly into place.
Connect additional sections where required for longer cable runs.

The secure locking profile helps hold the cover firmly in position once fitted, reducing the chance of it becoming loose or being pushed forwards by the cables behind it.

No drilling. No screws. No adhesive. No permanent modification to your panels.

IMPORTANT — PLEASE MEASURE BEFORE ORDERING

For the best fit, please measure the actual gap between your wooden slats in millimetres rather than relying solely on the panel manufacturer's stated dimensions.

Panel gaps can vary slightly, even across the same wall, so we recommend measuring in more than one position where possible.

Please measure the clear gap between the wooden slats, not the width of the wooden slat itself.

If your measurement falls between sizes or you're unsure which option to choose, please message us before ordering and we'll be happy to help.

PANEL COMPATIBILITY

These cable covers are designed to fit into the gap between acoustic panel slats and are suitable for a wide range of acoustic and decorative slat wall panels.

They do not require a particular type of backing and can be used with felt-backed, MDF-backed, wood-backed and other panel constructions, provided there is a suitable gap between the slats for the cover to fit into.

Simply measure the clear gap between your slats and select the corresponding size when ordering.

PRODUCT DETAILS

• Lengths: 250mm or 300mm
• Gap sizes: 10mm–22mm
• Height: Approx. 10mm
• Colour: Black, Grey or Beige.
• Secure push-fit installation
• Unique secure locking profile
• True End-to-End Join
• Full stated usable length
• Strengthened construction
• Premium textured finish
• No drilling, screws or adhesive required
• Designed and made in the UK

COMPLETE YOUR ACOUSTIC PANEL SETUP

We design a growing range of accessories specifically for acoustic slat wall panels, including:

• Soundbar brackets
• Shelf brackets
• Hooks
• Socket surrounds
• Speaker mounts
• Cable-management accessories
• And more

Visit our shop to explore the complete Groovy Gift acoustic panel accessory range.

THE ORIGINAL GROOVY GIFT DESIGN

Our acoustic panel accessories are designed in-house by Groovy Gift, with a focus on practical solutions that provide a clean, professional finish without unnecessary drilling or permanent modifications.

Our cable covers have been continually developed and refined through thousands of customer sales and real-world feedback.

Every detail — from the secure locking profile and strengthened construction to our True End-to-End Join — has been carefully developed to provide a reliable fit, straightforward installation and a clean, professional finish.

The result is a cable cover designed not just to hide your cables, but to stay securely in place, maximise usable coverage and blend neatly into your acoustic panel wall.

Produktsicherheit:

Hinweise zur Produktsicherheit:Hersteller:Andy WharmbyTolles GeschenkAllgemeine Warnhinweise:Unsere Produkte sind kein Spielzeug, sondern Dekorationsartikel und nicht für Kinder unter 3 Jahren geeignet.Aufgrund der Beschaffenheit des 3D-Druckverfahrens können kleinere Unregelmäßigkeiten wie kleine Lücken, Schichtlinien, leichte Unebenheiten oder feine Fäden vorhanden sein. Dies sind typische Merkmale von 3D-gedruckten Produkten. Jeder Artikel wird vor dem Versand sorgfältig durch unseren Qualitätskontrollprozess geprüft, um die Gesamtqualität sicherzustellen.