10" x 35-39" Long Laptop Wood Tray for Oversized Recliner, carved lap desk for puzzles, optional tablet stand and engraving

An oversized recliner will swallow a standard tray. If yours drops between the arms instead of resting on them, this is the length you actually needed.

A carved wood laptop tray made to order at 35 to 39 inches long and 10 inches deep — long enough to span a big recliner or a wide lounge chair, without the bulk of a 12 inch board.

Who it suits:
- Oversized, extra-wide and power recliners
- Wide lounge chairs and glider rockers, arm to arm
- Two people sharing a chair — laptop at one end, coffee at the other
- Anyone whose last tray was too short and slipped through

Built in pine, poplar, cedar, oak, cherry, mahogany or black walnut. Every edge is a double round-over, top and bottom, all the way around, then three coats of urethane.

Wood is a natural product with variations and may include stabilized knots, so no two laptop desks will be identical. Wood will be edge glued to achieve the requested width. If you want a board that is not edge glued or want a "live edge" look contact me for a quote.

Weight is about 4 to 4.75 pounds in pine or poplar, and about 7 to 8 pounds in white oak, with cedar, mahogany, cherry and walnut in between. Finish and options move it slightly.

Choose your finish — no extra charge.
Matte: flat, no shine. Shows the grain, hides fingerprints.
Satin: soft low sheen. Most popular, most forgiving.
Gloss: high shine, wipes cleanest, shows every water spot.

How options are counted — $9 each. Choose the number in the "# Of Options" dropdown, then list them in the personalization box.

Counts as 1: wine glass slot · shot glass depression · coffee mug depression · tablet/iPad slot · cell phone depression · engraved phrase or name carved into the wood, up to about 20 characters including spaces (longer than that needs a custom quote — just message me) · votive candle holders (up to 3) · laptop vent holes, which go through the board · hole cut out on one end for hanging, rectangular or circular · non-slip grips on the underside

Counts as 2: set of 2 metal handles · stain (available for pine) · risers, if you'd like the tray higher than the armrests, up to 4" tall · laptop vent ridges, carved 1/8" deep for extra airflow — these do not go through the board

Counts as 3: book stand, which also gives you the ability to use it as a tablet slot · backstop, which stops pens and pencils rolling off the back and helps prevent bowing

NOTE: Vent holes and vent ridges are two different things: holes go all the way through, ridges are shallow channels carved into the surface.

Plain tray? Choose "Base (No options)" and type NONE.

List more than you selected and I'll message you with the difference before I start — no work begins until we agree.

Consider adding a "CraftedLink" to your purchase:

A Tap-to-open NFC tag upgrade to any CraftedCarvingsUS product. I can set a small NFC tag into the board, invisible from the front, or I can carve an NFC symbol to help you locate it. Tap it with a phone and whatever you choose opens.

Your own link — $18. Locked to your https address, or left as a claimable gift link the recipient sets themselves. You can choose to have the link be changeable by you or locked in.

Hosted page — $45. I build it and host it at craftedlink.app and you choose from available templates. Hosted for at least 10 years from the day the tag is activated. Your photos and message stay downloadable for free the whole time — and after. No additional fees and will be editable by you soon.

Go to: https://www.etsy.com/pl/listing/4558219950/craftedlink-nfc-tag-tap-to-open-link-or for more info and to add that purchase.

At checkout:
1. Wood and number of options — the two dropdowns above Add to Cart. These set the price.
2. Requested Options — list each one, including any text if requested with font choice. Type NONE for a plain tray.
3. Size — choose up to the stated size for both length and width.
4. Finish — choose from matte, satin, or gloss polyurethane

I'll send a mockup showing where everything lands on the board before I cut anything.

FAQ:
My chair measures 33 inches — which listing? Usually the 30-34" one, if you want the tray sitting close to the arms. Come to this listing when you want length on purpose: some buyers want several inches longer on each end, especially with the handle cutout, so it's easy to grab.
Is a 39 inch tray heavy? In pine it's about 4.75 pounds. White oak the same size is closer to 8, and walnut about 6.5. Metal handles help if you move it often; they count as 2 options.
Can I have a laptop slot and a tablet slot? Yes. A tablet/iPad slot counts as 1; the book stand counts as 3 and also gives you the ability to use it as a tablet slot.

Message me for a size I don't list.

Different sizes: https://www.etsy.com/shop/CraftedCarvingsUS?section_id=21830631
NFC tags and other add-ons: https://www.etsy.com/shop/CraftedCarvingsUS?section_id=30384667
The whole shop: https://www.etsy.com/shop/CraftedCarvingsUS