K-Break Hybreed Cross Nine - Custom Modified 1/24th & 1/25th Scale Model Car Wheels - 19"

Summary:
- Base Wheel: Aoshima 19” K-Break Hybreed Cross Nine (Complete set of 4)
- Original Wheel faces offset modified for new brushed aluminum lips
- Custom Staggered Depth Aluminum replacement lips with normal front / deep rear depth / stepped Lip
- Kiwami ‘stretch’ tires with camber (Aoshima)
- Standard polycaps for Mounting
- original Aoshima decals

This is a set of Modified 19” Wheels provided in 1:24th/ 25 scale. The Base wheel for this set is Aoshima's 19" K-Break Hybreed Cross Nine. This wheel has had the original plastic lips replaced with brushed aluminum lips. These lips were machined with a Stepped lip and then hand finished to a beautiful satin finish (these can be further polished to a high shine with an automotive-grade aluminum polish, like Mothers). While the front lips are a little deeper than original depth, the rears are almost three times as deep as original, and as a result, the back of the wheel has been cut and trimmed to maintain nearly the same width. The Wheel faces have been left with Aoshima's Factory Chrome, which can be used as-is, or stripped so that the faces can be painted. All four custom wheels are wrapped in Aoshima 19" stretchwall 'Kiwami' tires, which have built in camber. This set will include the standard polycaps found in all Aoshima wheelsets, and the decals that came with the original wheels (for centercap logos and license plates NOTE: this decal sheet has been carefully cut to fit into the box).
As provided here, apart from final finishing as desired (decals / painting), these wheels are ready to be installed on your favorite model (suspension and mounting modifications on your model may be necessary to facilitate installation).
Please also note that, like all the wheels I create, these can be disassembled easily for polishing / painting.
Wheel Measurements (Provided in real life 1:1 inches and mm, and 1:24th/25th “Scale Size”):
- Overall Outside Diameter, With Tire:
- Front: 1.036" / 26.31mm (1:24= 24.9" / 631.5mm | 1:25= 25.9" / 657.9mm)
- Rear: 1.036" / 26.31mm (1:24= 24.9" / 631.5mm | 1:25= 25.9" / 657.9mm)
- Outside Diameter, Wheel only:
- Front: .875" / 22.3mm (1:24= 21.0" / 533.4mm | 1:25= 21.9" / 555.6mm)
- Rear: .875" / 22.3mm (1:24= 21.0" / 533.4mm | 1:25= 21.9" / 555.6mm)
- Wheel Width:
- Front: .518" / 13.16mm (1:24= 12.4" / 315.8mm | 1:25= 13.0" / 328.9mm)
- Rear: .514" / 13.06mm (1:24= 12.3" / 313.7mm | 1:25= 12.9" / 326.4mm)
- Offset from Front Face ( lip to wheel face or depth of lips ):
- Front: .161" / 4.09mm (1:24= 3.9" / 98.1mm | 1:25= 4.0" / 102.2mm)
- Rear: .324" / 8.23mm (1:24= 7.8" / 197.5mm | 1:25= 8.1" / 205.7mm)